Wraps by car

Mazda Tribute wrap

This page covers the Mazda Tribute wrap, the vinyl wrap options for both generations of this compact SUV. The first generation ran from 2000 to 2007 and the second from 2007 to 2011. A full wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film.

2generations18 mof film for a full wrap

Mazda Tribute, second generation, factory photo
Mazda Tribute, second generation. Factory color shown.

Mazda Tribute wrap colors and ideas

  • Tribute black wrap
  • Tribute white wrap
  • Tribute gray wrap
  • Tribute silver wrap
  • Tribute red wrap
  • Tribute blue wrap
  • Tribute green wrap
  • Tribute yellow wrap
  • Tribute orange wrap
  • Tribute purple wrap
  • Tribute pink wrap
  • Tribute teal wrap
  • Tribute brown wrap
  • Tribute gold wrap
  • Tribute chrome wrap
  • Tribute color shift wrap
  • Tribute carbon fiber wrap
  • Tribute camo and patterned wrap

How much vinyl to wrap a Mazda Tribute

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2011SUV (5 doors)174.4 in (4,429 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)
2000–2007SUV (5 doors)173.0 in (4,395 mm) to 174.4 in (4,429 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Tribute wrap cost factors

Tribute wrap cost depends on the amount of film, about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap, and the labor for the roof from a platform. The tailgate glass and tall body add time for careful trimming and positioning. A partial wrap or chrome delete uses less film and fewer hours.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (69.7 in (1,770 mm)): the roof is wrapped from a platform.

Tribute wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Tribute, second generation, factory photo
Factory color shown

2007–2011 Tribute SUV (second generation)

2007–2011SUV (5 doors)174.4 in (4,429 mm)

The second generation Mazda Tribute, made from 2007 to 2011, has a body height of 69.7 in (1,770 mm). The roof is wrapped from a platform, which takes more time than lower sections. This height is a key factor when planning the wrap steps.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (69.7 in (1,770 mm)): the roof is wrapped from a platform.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Mazda Tribute, first generation, factory photo
Factory color shown

2000–2007 Tribute SUV (first generation)

2000–2007SUV (5 doors)173.0 in (4,395 mm) to 174.4 in (4,429 mm)

The first generation Mazda Tribute, made from 2000 to 2007 with a restyle in 2003, often has original or repainted panels. Paint age matters on a car of these years, so a test spot comes before a full wrap. Checking adhesion on each panel prevents lifting later.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (69.5 in (1,765 mm)): the roof is wrapped from a platform.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Tribute

A partial wrap on a Mazda Tribute covers the roof, hood, or mirror caps as separate jobs. Tribute chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end for impact protection.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda Tribute: body, cut-outs and film

The Mazda Tribute vinyl wrap fits a five-door SUV body with a length of 174.4 in (4,429 mm) on the second generation. The first generation measures 173.0 in (4,395 mm) to 174.4 in (4,429 mm) after its 2003 restyle. These dimensions make the Tribute a straightforward single-vehicle wrap without extra panels for a long-wheelbase version.

Tribute wrap ideas start with the tailgate, where the rear glass sits in the panel and the film ends at the edge of the glass. The tall body, 69.7 in (1,770 mm) on the second generation, means the roof is wrapped from a platform. Door handles and mirrors are removed for clean edges, and badges come off for a smooth surface.

How much vinyl to wrap a Tribute depends on the generation, as the first generation gained 1.4 in (36 mm) in length after its 2003 restyle. The film estimate stays the same at about 59 ft (18 m) of 60-inch (1.52 m) cast film for both generations. Chrome or patterned film raises the figure to about 76 ft (23 m) because of pattern matching.

Questions about wrapping a Mazda Tribute

How much vinyl does it take to wrap a Mazda Tribute?

How much vinyl does it take to wrap a Mazda Tribute? A full wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate rises to about 76 ft (23 m).

Can I wrap only the hood or the roof of a Tribute?

Can I wrap only the hood or the roof of a Tribute? Yes, the hood and the roof are offered as partial wrap jobs. The roof requires a platform because of the body height of 69.7 in (1,770 mm) on the second generation.

Is a Tribute hard to wrap?

Is a Tribute hard to wrap? Yes, the tall body and the tailgate glass add work. The roof is wrapped from a platform, and the film ends at the edge of the rear glass. These details require careful trimming on every Tribute.

How many generations of the Tribute does this page cover?

How many generations of the Tribute does this page cover? This page covers two generations. They are the first generation from 2000 to 2007 and the second from 2007 to 2011.