Wraps by car

Mazda Verisa wrap

This page covers the Mazda Verisa wrap for one generation of the subcompact hatchback. The first generation ran from 2006 to 2015, and it is the only generation in this catalog. A full wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned film wrap takes about 61 ft (18.5 m).

1generations15.5 mof film for a full wrap

Mazda Verisa, first generation, factory photo
Mazda Verisa, first generation. Factory color shown.

Mazda Verisa wrap colors and ideas

  • Verisa black wrap
  • Verisa white wrap
  • Verisa gray wrap
  • Verisa silver wrap
  • Verisa red wrap
  • Verisa blue wrap
  • Verisa green wrap
  • Verisa yellow wrap
  • Verisa orange wrap
  • Verisa purple wrap
  • Verisa pink wrap
  • Verisa teal wrap
  • Verisa brown wrap
  • Verisa gold wrap
  • Verisa chrome wrap
  • Verisa color shift wrap
  • Verisa carbon fiber wrap
  • Verisa camo and patterned wrap

How much vinyl to wrap a Mazda Verisa

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2015hatchback (5 doors)156.5 in (3,975 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Verisa wrap cost factors

The Verisa wrap cost depends on the film, the condition of the paint, and the amount of disassembly. The car is 156.5 in (3,975 mm) long, and a full wrap takes about 51 ft (15.5 m) of cast film. The tailgate glass line and the door handles add a little labor for cutting. A partial wrap or paint protection film (PPF) on the front end is a smaller job than the full body.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Verisa wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Verisa, first generation, factory photo
Factory color shown

2006–2015 Verisa hatchback (first generation)

2006–2015hatchback (5 doors)156.5 in (3,975 mm)

The first generation Mazda Verisa is a five-door hatchback produced from 2006 to 2015. On a car of these years, panels may be original or repainted, and a test spot comes before a full wrap. The body code DC identifies this model in the catalog. The only major area for extra time is the tailgate, because the film ends at the edge of the rear glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Verisa

A smaller job on the Mazda Verisa can be a partial wrap of the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) on the front end guards the hood, fenders, and bumper with clear film.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda Verisa: body, cut-outs and film

The Mazda Verisa vinyl wrap fits a five-door hatchback that measures 156.5 in (3,975 mm) long. Its compact size keeps most panels flat and easy to cover with a single sheet of film. The straight roof line and modest fender curves reduce the need for stretching in the middle of the car.

For Verisa wrap ideas, the main area to plan for is the tailgate with the rear glass in it. The film ends at the edge of the glass, so the install matches the glass line cleanly. Door handles and side mirrors can stay on, but the installer will cut around them carefully.

If you want to know how much vinyl to wrap a Verisa, the hatchback body needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned film job needs about 61 ft (18.5 m) because the pattern must line up across panels. This single generation shares the same five-door shape for all its production years, so the figure stays stable.

Questions about wrapping a Mazda Verisa

How much vinyl does it take to wrap a Mazda Verisa?

About 51 ft (15.5 m) of 60-inch (1.52 m) cast film wraps a Mazda Verisa. This figure comes from the full body of the hatchback that was made from 2006 to 2015. A chrome or patterned film takes about 61 ft (18.5 m).

Can I wrap only the hood or the roof of a Verisa?

Yes, you can wrap only the hood or the roof of a Verisa. The partial wrap options also include mirror caps, a chrome delete on the window trim and badges, or clear paint protection film on the front end.

Is a Verisa hard to wrap?

A Verisa is not hard to wrap, but the tailgate adds a little work because the rear glass is set into it and the film ends at the edge of the glass. At 156.5 in (3,975 mm) long, the body is compact and has few deep recesses.

How many generations of the Verisa does this page cover?

This page covers one generation of the Verisa. The catalog includes only the first generation, a five-door hatchback made from 2006 to 2015.