Wraps by car

Mazda Xedos 6 wrap

This page covers the Mazda Xedos 6 wrap, including the single generation produced from 1992 to 2000. The mid-size sedan was sold in one body style with four doors. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Mazda Xedos 6, first generation, factory photo
Mazda Xedos 6, first generation. Factory color shown.

Mazda Xedos 6 wrap colors and ideas

  • Xedos 6 black wrap
  • Xedos 6 white wrap
  • Xedos 6 gray wrap
  • Xedos 6 silver wrap
  • Xedos 6 red wrap
  • Xedos 6 blue wrap
  • Xedos 6 green wrap
  • Xedos 6 yellow wrap
  • Xedos 6 orange wrap
  • Xedos 6 purple wrap
  • Xedos 6 pink wrap
  • Xedos 6 teal wrap
  • Xedos 6 brown wrap
  • Xedos 6 gold wrap
  • Xedos 6 chrome wrap
  • Xedos 6 color shift wrap
  • Xedos 6 carbon fiber wrap
  • Xedos 6 camo and patterned wrap

How much vinyl to wrap a Mazda Xedos 6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–2000sedan (4 doors)179.5 in (4,560 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Xedos 6 wrap cost factors

Xedos 6 wrap cost depends on the size of the sedan body and the condition of its panels. The car is 179.5 in (4,560 mm) long, so material use matches a mid-size four-door. A full wrap needs about 51 ft (15.5 m) of cast film, with extra if chrome or patterned film is used.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (4 doors).

Xedos 6 wraps by generation

Swipe sideways. Tap a card for the full description.

Mazda Xedos 6, first generation, factory photo
Factory color shown

1992–2000 Xedos 6 sedan (first generation)

1992–2000sedan (4 doors)179.5 in (4,560 mm)

The first generation of the Mazda Xedos 6 ran from 1992 to 2000 as a four-door sedan. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The installer checks paint adhesion on each panel before stretching film over it.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Xedos 6

The Mazda Xedos 6 suits smaller jobs like a partial wrap on the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Mazda Xedos 6: body, cut-outs and film

A Mazda Xedos 6 vinyl wrap covers a sedan body that measures 179.5 in (4,560 mm) long. The four-door body has a conventional trunk and roof, so the install follows standard sedan panel layouts. Its mid-size dimensions mean the amount of film is typical for a car of this class.

Xedos 6 wrap ideas often include working around door handles, mirrors, and the front bumper openings. The door handles and mirrors come off for a cleaner install, while the bumpers require careful inlays around fog lamp recesses. Badges and trim pieces are removed before the film is applied.

How much vinyl to wrap a Xedos 6 stays constant because there was only one generation. The catalog lists the 1992–2000 sedan with no major body changes between production years. Someone who counts film can use the same estimate for every year of this model.

Questions about wrapping a Mazda Xedos 6

How much vinyl does it take to wrap a Mazda Xedos 6?

About 51 ft (15.5 m) of 60-inch (1.52 m) cast film is needed to wrap a Mazda Xedos 6. The estimate covers the full body of the four-door sedan. Chrome or patterned film raises the figure to about 62 ft (19 m) because of pattern matching and extra waste.

Can I wrap only the hood or the roof of a Xedos 6?

Yes, you can wrap only the hood or the roof of a Xedos 6. A partial wrap on the roof, hood, or mirror caps is a common smaller job. These areas are flat enough for a clean install without removing body panels.

Is a Xedos 6 hard to wrap?

A Xedos 6 is not especially hard to wrap, but the bumpers and door handles add work. The door handles and mirrors come off for better film fit, and the bumper recesses need careful cutting. The sedan's mid-size length means standard panel sizes, so an installer with sedan experience can manage it.

How many generations of the Xedos 6 does this page cover?

This page covers one generation of the Xedos 6. The car was produced from 1992 to 2000 with no major body style changes. All wrap estimates on this page refer to that single generation.