Wraps by car

Mitsuoka Le-Seyde wrap

The Mitsuoka Le-Seyde wrap page covers the first generation from 1990 to 2001. This single generation is a convertible with two doors. A full wrap of the Le-Seyde uses about 56 ft (17 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 62 ft (19 m).

1generations17 mof film for a full wrap

Mitsuoka Le-Seyde, first generation, factory photo
Mitsuoka Le-Seyde, first generation. Factory color shown.

Mitsuoka Le-Seyde wrap colors and ideas

  • Le-Seyde black wrap
  • Le-Seyde white wrap
  • Le-Seyde gray wrap
  • Le-Seyde silver wrap
  • Le-Seyde red wrap
  • Le-Seyde blue wrap
  • Le-Seyde green wrap
  • Le-Seyde yellow wrap
  • Le-Seyde orange wrap
  • Le-Seyde purple wrap
  • Le-Seyde pink wrap
  • Le-Seyde teal wrap
  • Le-Seyde brown wrap
  • Le-Seyde gold wrap
  • Le-Seyde chrome wrap
  • Le-Seyde color shift wrap
  • Le-Seyde carbon fiber wrap
  • Le-Seyde camo and patterned wrap

How much vinyl to wrap a Mitsuoka Le-Seyde

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1990–2001convertible (2 doors)209.4 in (5,320 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Le-Seyde wrap cost factors

Le-Seyde wrap cost depends on the size and shape of this 209.4 in (5,320 mm) convertible. Long body panels need more time to lay flat without wrinkles. The open top adds work around the beltline and the area behind the seats. Chrome or patterned film also increases waste and labour.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Le-Seyde wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsuoka Le-Seyde, first generation, factory photo
Factory color shown

1990–2001 Le-Seyde convertible (first generation)

1990–2001convertible (2 doors)209.4 in (5,320 mm)

The first generation Mitsuoka Le-Seyde has a convertible body with an open top. A fabric top is not wrapped, so the film ends where the top begins. If the car has a folding hard top, that top is wrapped as panels of its own. The surrounding body edges need clean cut lines to match the top.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Le-Seyde

Smaller Le-Seyde jobs include a partial wrap of the hood, mirror caps, and rear deck. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end. These options wrap only selected panels rather than the full car.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsuoka Le-Seyde: body, cut-outs and film

A Mitsuoka Le-Seyde vinyl wrap has to fit a very long convertible body. The car measures 209.4 in (5,320 mm), so installers need extra hands and a clean floor. Its two-door shape means large door panels and long rear quarters. The lack of a fixed roof also changes how the film is laid out.

Le-Seyde wrap ideas start with how the open top changes the job. The fabric top is not wrapped, so film ends where the top begins. A folding hard top, if fitted, is wrapped as panels of its own. Door handles, mirrors, and the trunk area need cut-outs for access and edges.

How much vinyl to wrap a Le-Seyde depends only on the single generation from 1990 to 2001. There are no other body styles or later generations to compare. The convertible shape and long panels push the fresh film estimate to about 56 ft (17 m). Chrome or patterned film raises that figure to about 62 ft (19 m).

Questions about wrapping a Mitsuoka Le-Seyde

How much vinyl does it take to wrap a Mitsuoka Le-Seyde?

A full Mitsuoka Le-Seyde wrap takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 62 ft (19 m). These figures come from the first generation body estimate. The car is a long convertible, so the numbers assume a standard full coverage.

Is the top of a Le-Seyde wrapped?

No, the top of a Le-Seyde is not wrapped when it is a fabric convertible top. The film ends where that fabric top begins. A folding hard top is wrapped as panels of its own. The open top is not covered with vinyl.

Can I wrap only the hood or the roof of a Le-Seyde?

Yes, you can wrap only the hood or the roof area of a Le-Seyde as a partial wrap. Other partial jobs include the mirror caps and rear deck. A chrome delete covers window trim and badges. The roof itself is not wrapped on the convertible, but the surrounding panels can be.

Is a Le-Seyde hard to wrap?

Yes, a Le-Seyde is harder to wrap than a short coupe. The car is 209.4 in (5,320 mm) long, so every panel needs more material. The convertible body means film stops at the top edge with no roof to hide seams. The long doors and quarters add time and care.