Wraps by car

Mitsuoka Rock Star wrap

A Mitsuoka Rock Star wrap turns this retro-styled convertible into a personal color statement. The catalog covers the first generation built from 2018 onward. A full wrap of the newest body uses about 39 ft (12 m) of 60-inch (1.52 m) cast vinyl wrap.

1generations12 mof film for a full wrap

Mitsuoka Rock Star, first generation, factory photo
Mitsuoka Rock Star, first generation. Factory color shown.

Mitsuoka Rock Star wrap colors and ideas

  • Rock Star black wrap
  • Rock Star white wrap
  • Rock Star gray wrap
  • Rock Star silver wrap
  • Rock Star red wrap
  • Rock Star blue wrap
  • Rock Star green wrap
  • Rock Star yellow wrap
  • Rock Star orange wrap
  • Rock Star purple wrap
  • Rock Star pink wrap
  • Rock Star teal wrap
  • Rock Star brown wrap
  • Rock Star gold wrap
  • Rock Star chrome wrap
  • Rock Star color shift wrap
  • Rock Star carbon fiber wrap
  • Rock Star camo and patterned wrap

How much vinyl to wrap a Mitsuoka Rock Star

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowconvertible (2 doors)171.1 in (4,345 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Rock Star wrap cost factors

Rock Star wrap cost follows the body size, the film choice, and the prep of the trim. The car is 171.1 in (4,345 mm) long, so labor is close to other compact convertibles. A chrome or patterned film takes about 52 ft (16 m), which raises material use. Removing the grille, handles, and mirrors adds time to the job.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Rock Star wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsuoka Rock Star, first generation, factory photo
Factory color shown

2018–now Rock Star convertible (first generation)

2018–nowconvertible (2 doors)171.1 in (4,345 mm)

The open top on the first generation Mitsuoka Rock Star is not covered with film. The fabric roof is left in its original color, and the vinyl wrap ends where the top meets the painted body. The film is trimmed along the beltline and around the rear deck. No vinyl is applied to the folding mechanism or the top itself.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Rock Star

A partial wrap on the Rock Star covers the hood, mirror caps, and rear deck. Rock Star chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. Each of these jobs uses far less film than a full color change wrap.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsuoka Rock Star: body, cut-outs and film

The Mitsuoka Rock Star vinyl wrap is planned around one body style. The Rock Star is a two-door convertible with a body length of 171.1 in (4,345 mm). The soft top and its frame stay uncovered, so the film ends at the beltline. The modest size keeps the material estimate similar to other small sports cars.

Rock Star wrap ideas work around the chrome and the convertible opening. The window trim and badges are fine places for a blackout or contrast finish. The door handles, mirrors, and front grille come off for cleaner edges. The fabric top is not wrapped, and the film stops where the top meets the body.

Anyone counting how much vinyl to wrap a Rock Star looks at one generation only. The first-generation body was introduced in 2018 and remains current. No earlier or later body shapes exist in the catalog to change the estimate. The same 60-inch (1.52 m) film width works throughout the run.

Questions about wrapping a Mitsuoka Rock Star

How much vinyl does it take to wrap a Mitsuoka Rock Star?

A full wrap of a Mitsuoka Rock Star takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. The figure covers the painted body panels of the first-generation convertible. Chrome or patterned film raises the estimate to about 52 ft (16 m).

Is the top of a Rock Star wrapped?

No, the fabric top of a Rock Star is not wrapped. The vinyl wrap ends where the top meets the painted body. The folding top stays in its original material and color.

Can I wrap only the hood or the roof of a Rock Star?

Yes, you can wrap only the hood or the rear deck of a Rock Star. A partial wrap on this car covers the hood, mirror caps, and rear deck. The roof is not a wrap surface because it is a fabric convertible top.

Is a Rock Star hard to wrap?

Yes, a Rock Star adds work because it is a convertible. The fabric top must be masked off, and the film is trimmed at the beltline. The chrome trim, grille, and badges are removed for clean edges. The body is 171.1 in (4,345 mm) long, so it is not a large panel job.