Wraps by car

Mitsuoka Ryugi wrap

The Mitsuoka Ryugi wrap is a full vinyl wrap for a distinctive four-door sedan made since 2014. This page covers the Ryugi's single generation and the film a complete wrap of its body takes. A full wrap uses about 56 ft (17 m) of 60-inch (1.52 m) cast film, or about 64 ft (19.5 m) if you choose chrome or patterned film.

1generations17 mof film for a full wrap

Mitsuoka Ryugi, first generation, factory photo
Mitsuoka Ryugi, first generation. Factory color shown.

Mitsuoka Ryugi wrap colors and ideas

  • Ryugi black wrap
  • Ryugi white wrap
  • Ryugi gray wrap
  • Ryugi silver wrap
  • Ryugi red wrap
  • Ryugi blue wrap
  • Ryugi green wrap
  • Ryugi yellow wrap
  • Ryugi orange wrap
  • Ryugi purple wrap
  • Ryugi pink wrap
  • Ryugi teal wrap
  • Ryugi brown wrap
  • Ryugi gold wrap
  • Ryugi chrome wrap
  • Ryugi color shift wrap
  • Ryugi carbon fiber wrap
  • Ryugi camo and patterned wrap

How much vinyl to wrap a Mitsuoka Ryugi

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowsedan (4 doors)177.6 in (4,510 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Ryugi wrap cost factors

Ryugi wrap cost depends on the film you pick and on how much of the car is covered. A full wrap needs about 56 ft (17 m) of 60-inch (1.52 m) cast film, while chrome or patterned film takes about 64 ft (19.5 m). The four doors, trunk and the 177.6 in (4,510 mm) body length set the labor, and extra cut-outs around the chrome trim and badges add time.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Ryugi wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsuoka Ryugi, first generation, factory photo
Factory color shown

2014–now Ryugi sedan (first generation)

2014–nowsedan (4 doors)177.6 in (4,510 mm)

The first generation of the Ryugi is a four-door sedan built from 2014 to the present. Its length of 177.6 in (4,510 mm) means a wrap uses about 56 ft (17 m) of 60-inch (1.52 m) cast film, or about 64 ft (19.5 m) of chrome or patterned film. Because there is one body style, the hood, roof, doors and trunk are the main panels a shop will wrap.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Ryugi

A partial wrap on a Ryugi can cover the roof, the hood or the mirror caps with the same film used for a full wrap. A chrome delete covers the window trim and badges with black film to remove the brightwork. Paint protection film (PPF) is a clear film applied to the front end to guard the paint from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsuoka Ryugi: body, cut-outs and film

A Mitsuoka Ryugi vinyl wrap is planned around a four-door sedan body that is 177.6 in (4,510 mm) long. The four doors and the trunk add panels, but there are no long roof rails or a tailgate to work around. The sedan shape keeps the main surfaces smooth, so the film flows over the hood, roof and sides in large pieces.

Ryugi wrap ideas can start with the chrome grille, the window trim and the badges, because these parts need cut-outs or often come off for a clean install. The door handles are removed so the film can run behind them without seams. The mirrors are wrapped with separate pieces, and the bumpers are done last because they have the deepest recesses.

How much vinyl to wrap a Ryugi has stayed the same because this model has one body style in one generation. The length of 177.6 in (4,510 mm) and the four-door sedan shape set the panel count. A shop ordering film for any Ryugi from 2014 onward can use the same amount of material.

Questions about wrapping a Mitsuoka Ryugi

How much vinyl does it take to wrap a Mitsuoka Ryugi?

Yes, a Mitsuoka Ryugi takes about 56 ft (17 m) of 60-inch (1.52 m) cast film, or about 64 ft (19.5 m) if the film is chrome or patterned.

Can I wrap only the hood or the roof of a Ryugi?

Yes, you can wrap only the hood or the roof of a Ryugi as a partial wrap. Mirror caps can be done the same way, and a chrome delete covers just the window trim and badges.

Is a Ryugi hard to wrap?

A Ryugi is no harder to wrap than other sedans of its size, but the chrome grille, window trim and badges need careful cut-outs or removal. Its 177.6 in (4,510 mm) length and four doors mean more panels than on a coupe, which adds time.

How many generations of the Ryugi does this page cover?

This page covers one generation of the Ryugi, the first generation built from 2014 to the present.