Wraps by car

Mitsuoka Viewt wrap

The Mitsuoka Viewt wrap page covers the compact four-door sedan through three generations, from 1995 to the present. A full wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 8 ft (2.5 m) to that figure.

3generations17 mof film for a full wrap

Mitsuoka Viewt, third generation, factory photo
Mitsuoka Viewt, third generation. Factory color shown.

Mitsuoka Viewt wrap colors and ideas

  • Viewt black wrap
  • Viewt white wrap
  • Viewt gray wrap
  • Viewt silver wrap
  • Viewt red wrap
  • Viewt blue wrap
  • Viewt green wrap
  • Viewt yellow wrap
  • Viewt orange wrap
  • Viewt purple wrap
  • Viewt pink wrap
  • Viewt teal wrap
  • Viewt brown wrap
  • Viewt gold wrap
  • Viewt chrome wrap
  • Viewt color shift wrap
  • Viewt carbon fiber wrap
  • Viewt camo and patterned wrap

How much vinyl to wrap a Mitsuoka Viewt

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–nowsedan (4 doors)177.8 in (4,515 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
2005–2012sedan (4 doors)173.2 in (4,400 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1995–2003sedan (4 doors)167.3 in (4,250 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Viewt wrap cost factors

Viewt wrap cost depends on the size of the car, the amount of film, and the labor for disassembly. The newest Viewt uses about 56 ft (17 m) of film, while the first generation uses about 48 ft (14.5 m). Chrome delete and partial wraps use less material than a full color change wrap. The condition of the paint also affects preparation time.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Viewt wraps by generation

Swipe sideways. Tap a card for the full description.

Mitsuoka Viewt, third generation, factory photo
Factory color shown

2012–now Viewt sedan (third generation)

2012–nowsedan (4 doors)177.8 in (4,515 mm)

The third generation Mitsuoka Viewt (2012–now) is a compact sedan with a length of 177.8 in (4,515 mm). It is based on the Nissan March K13 and has four doors. Paint age on a car of these years may be original or repainted. A test spot comes before a full wrap to check adhesion on older paint.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Mitsuoka Viewt, second generation, factory photo
Factory color shown

2005–2012 Viewt sedan (second generation)

2005–2012sedan (4 doors)173.2 in (4,400 mm)

The second generation Mitsuoka Viewt (2005–2012) is a compact sedan with a length of 173.2 in (4,400 mm). It is based on the Nissan March K12 and has four doors. Its size and body style mean a full wrap takes about 54 ft (16.5 m) of 60-inch film. Chrome or patterned film adds about 8 ft (2.5 m).

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Mitsuoka Viewt, first generation, factory photo
Factory color shown

1995–2003 Viewt sedan (first generation)

1995–2003sedan (4 doors)167.3 in (4,250 mm)

The first generation Mitsuoka Viewt (1995–2003) is a compact sedan with a length of 167.3 in (4,250 mm). It is based on the Nissan March K11 and has four doors. Its smaller size means a full wrap takes about 48 ft (14.5 m) of 60-inch film. Chrome or patterned film adds about 11 ft (3.5 m) to the total.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Viewt

A partial wrap of the Mitsuoka Viewt can cover the roof, hood, or mirror caps. A Viewt chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end. These smaller jobs use less material and are a good way to change the look.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Mitsuoka Viewt: body, cut-outs and film

A Mitsuoka Viewt vinyl wrap follows the sedan body style of all three generations. The cars are compact, with lengths from 167.3 in (4,250 mm) to 177.8 in (4,515 mm). The four doors and fixed roof make the panel count predictable for installers. The newest generation uses slightly more film than the earlier ones.

Viewt wrap ideas start with the front and rear bumpers, which need cut-outs for parking sensors on some trims. Door handles and mirrors come off for a cleaner install. The chrome trim around the windows and grille is often covered in black vinyl as a chrome delete. Badges are removed for wrapping and then reinstalled.

How much vinyl to wrap a Viewt depends on the generation. The third generation (2012–now) needs about 56 ft (17 m) of 60-inch film for a full wrap. The second generation (2005–2012) needs about 54 ft (16.5 m). The first generation (1995–2003) needs about 48 ft (14.5 m).

Questions about wrapping a Mitsuoka Viewt

How much vinyl does it take to wrap a Mitsuoka Viewt?

Yes, a Mitsuoka Viewt takes about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film adds about 8 ft (2.5 m) to that figure. This is the estimate for the newest body style.

Can I wrap only the hood or the roof of a Viewt?

Yes, you can wrap only the hood or the roof of a Viewt. Partial wraps of the roof, hood, or mirror caps are common jobs. A chrome delete of the window trim and badges is also possible. Paint protection film on the front end is another option.

Is a Viewt hard to wrap?

A Viewt is not particularly hard to wrap, but some parts need extra work. The front and rear bumpers may need cut-outs for parking sensors on some trims. Door handles and mirrors come off for a cleaner install. The chrome trim around the windows and grille is often covered in black vinyl.

How many generations of the Viewt does this page cover?

This page covers three generations of the Mitsuoka Viewt. They are the first generation (1995–2003), the second generation (2005–2012), and the third generation (2012–now).