Wraps by car

Proton Gen-2 wrap

A Proton Gen-2 wrap covers this five-door hatchback with a color change or protection film. The catalog includes one generation of the car, produced from 2004 to 2012. A full vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Proton Gen-2, first generation, factory photo
Proton Gen-2, first generation. Factory color shown.

Proton Gen-2 wrap colors and ideas

  • Proton Gen-2 black wrap
  • Proton Gen-2 white wrap
  • Proton Gen-2 gray wrap
  • Proton Gen-2 silver wrap
  • Proton Gen-2 red wrap
  • Proton Gen-2 blue wrap
  • Proton Gen-2 green wrap
  • Proton Gen-2 yellow wrap
  • Proton Gen-2 orange wrap
  • Proton Gen-2 purple wrap
  • Proton Gen-2 pink wrap
  • Proton Gen-2 teal wrap
  • Proton Gen-2 brown wrap
  • Proton Gen-2 gold wrap
  • Proton Gen-2 chrome wrap
  • Proton Gen-2 color shift wrap
  • Proton Gen-2 carbon fiber wrap
  • Proton Gen-2 camo and patterned wrap

How much vinyl to wrap a Proton Gen-2

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2004–2012hatchback (5 doors)169.7 in (4,310 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Proton Gen-2 wrap cost factors

Proton Gen-2 wrap cost depends on the size of the job and the film finish. A full wrap of the hatchback takes about 49 ft (15 m) of cast film. Chrome or patterned film raises the amount to about 62 ft (19 m). Prep time grows on a car of these years, where panels may be repainted.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Proton Gen-2 wraps by generation

Swipe sideways. Tap a card for the full description.

Proton Gen-2, first generation, factory photo
Factory color shown

2004–2012 Proton Gen-2 hatchback (first generation)

2004–2012hatchback (5 doors)169.7 in (4,310 mm)

The first generation Proton Gen-2 came out in 2004 and ended in 2012. Paint age matters on these cars: a panel may be original or repainted. A test spot comes before a full wrap, so the film bonds to good paint. The five-door hatchback body is the only style in the catalog.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Proton Gen-2

A partial wrap on a Proton Gen-2 covers the roof, hood or mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end. These jobs use much less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Proton Gen-2: body, cut-outs and film

A Proton Gen-2 vinyl wrap follows the compact five-door hatchback shape. The body is 169.7 in (4,310 mm) long, so a full wrap uses about 49 ft (15 m) of 60-inch cast film. The tailgate has the rear glass in it, which shortens the film area. Fewer doors would be easier to cover with long panels.

Proton Gen-2 wrap ideas start with the tailgate design. The rear glass is set into the tailgate, so the film ends at the edge of the glass. Cut-outs are needed around door handles, mirrors, lights and trim. Door handles and mirror caps come off for a cleaner finish.

How much vinyl to wrap a Proton Gen-2 depends on which film you choose. A full wrap in plain cast film takes about 49 ft (15 m) of 60-inch material. Chrome or patterned film needs about 62 ft (19 m) because of pattern matching. There is only one body style in this generation.

Questions about wrapping a Proton Gen-2

How much vinyl does it take to wrap a Proton Gen-2?

A Proton Gen-2 takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film needs about 62 ft (19 m). The estimate is for the five-door hatchback body in the catalog.

Can I wrap only the hood or the roof of a Proton Gen-2?

Yes, you can wrap only the hood or the roof of a Proton Gen-2. A partial wrap also includes mirror caps, chrome delete for window trim and badges, and paint protection film on the front end.

Is a Proton Gen-2 hard to wrap?

A Proton Gen-2 is not hard to wrap, but one part adds work. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The compact body is 169.7 in (4,310 mm) long, which is a normal size for installation.

How many generations of the Proton Gen-2 does this page cover?

This page covers one generation of the Proton Gen-2, produced from 2004 to 2012.