Wraps by car

Proton Perdana wrap

This page covers a Proton Perdana wrap for the first-generation sedan, produced from 1995 to 2010. A full vinyl wrap of this mid-size four-door needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for roughly 64 ft (19.5 m). Use these figures to estimate material before you start.

1generations15.5 mof film for a full wrap

Proton Perdana, first generation, factory photo
Proton Perdana, first generation. Factory color shown.

Proton Perdana wrap colors and ideas

  • Perdana black wrap
  • Perdana white wrap
  • Perdana gray wrap
  • Perdana silver wrap
  • Perdana red wrap
  • Perdana blue wrap
  • Perdana green wrap
  • Perdana yellow wrap
  • Perdana orange wrap
  • Perdana purple wrap
  • Perdana pink wrap
  • Perdana teal wrap
  • Perdana brown wrap
  • Perdana gold wrap
  • Perdana chrome wrap
  • Perdana color shift wrap
  • Perdana carbon fiber wrap
  • Perdana camo and patterned wrap

How much vinyl to wrap a Proton Perdana

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1995–2010sedan (4 doors)181.7 in (4,615 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Perdana wrap cost factors

The Perdana wrap cost depends on how much film is used and how much labor is needed to fit the 181.7 in (4,615 mm) sedan body. A full wrap takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, or about 64 ft (19.5 m) for chrome or patterned film. More complex finishes or extra prep work on the 1995–2010 panels add time. The number of cut-outs and the condition of the paint also change how many hours the job takes.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Perdana wraps by generation

Swipe sideways. Tap a card for the full description.

Proton Perdana, first generation, factory photo
Factory color shown

1995–2010 Perdana sedan (first generation)

1995–2010sedan (4 doors)181.7 in (4,615 mm)

The first generation Proton Perdana was built as a mid-size sedan from 1995 to 2010. On a car of these years, panels may be original or repainted, so always do a test spot before a full wrap. The paint age affects how well film adheres and whether you need to correct defects first. Because this generation was produced for a long period, you may find different levels of wear on the same model.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Perdana

A partial wrap on the Proton Perdana can cover the roof, hood or mirror caps. A chrome delete on the window trim and badges is another smaller job that changes the look with black film. Paint protection film (PPF) on the front end protects the hood and bumper from stone chips. These options use far less material than the full 51 ft (15.5 m) estimate.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Proton Perdana: body, cut-outs and film

The Proton Perdana vinyl wrap goes onto a single four-door sedan body that is 181.7 in (4,615 mm) long. This mid-size footprint means a full color change wrap uses roughly 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The simple sedan shape has flat sides and a conventional trunk, so you can cut panels from standard roll widths without excessive waste. You only need to prepare the four doors, the roof, the hood, the trunk lid and the bumpers for film.

For Perdana wrap ideas, start with the parts that need cut-outs or come off the car. The door handles, mirror caps, badges and antenna are removed or trimmed around for a clean edge. The front and rear bumpers have large openings for fog lights and grilles, so they take extra time with relief cuts. You can use a chrome delete on the window trim and badges to change the look without wrapping the whole car.

When you ask how much vinyl to wrap a Perdana, the answer stays the same across all first-generation cars because there is only one body style. The 1995–2010 sedan measures 181.7 in (4,615 mm) long in every trim, so the full wrap estimate is about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. If the car has been repainted or the panels are not original, you may need extra film for test pieces or rework. Always buy a few extra feet beyond the estimate for mistakes and overlaps.

Questions about wrapping a Proton Perdana

How much vinyl does it take to wrap a Proton Perdana?

A full Proton Perdana wrap takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, plan for about 64 ft (19.5 m). These figures are for the first-generation sedan body from 1995 to 2010. Always add a little extra for mistakes and trimming.

Can I wrap only the hood or the roof of a Perdana?

Yes, you can wrap only the hood or the roof of a Perdana. These partial jobs also include mirror caps and a chrome delete on the window trim and badges. Paint protection film (PPF) on the front end is another small option. Each uses far less film than a full wrap.

Is a Perdana hard to wrap?

The Perdana is a mid-size sedan, so the main extra work comes from the large front and rear bumpers with many cut-outs. The body itself is a conventional four-door shape with flat panels, which is not hard for an installer. But because it was made from 1995 to 2010, you may need to spend more time on old or repainted paint. A test spot is a good idea before wrapping a car of these years.

How many generations of the Perdana does this page cover?

This page covers one generation of the Proton Perdana, the first generation built from 1995 to 2010. It was produced only as a four-door sedan in a single body style. The length is 181.7 in (4,615 mm), and a full wrap takes about 51 ft (15.5 m) of 60-inch film.