Wraps by car

Proton Wira wrap

The Proton Wira wrap page covers one generation of this compact car, produced from 1993 to 2009. A full vinyl wrap of the newest body takes about 49 ft (15 m) for the liftback to 74 ft (22.5 m) for the coupe. The estimate uses 60-inch (1.52 m) cast film, with chrome or patterned film up to about 82 ft (25 m).

1generations22.5 mof film for a full wrap

Proton Wira, first generation, factory photo
Proton Wira, first generation. Factory color shown.

Proton Wira wrap colors and ideas

  • Wira black wrap
  • Wira white wrap
  • Wira gray wrap
  • Wira silver wrap
  • Wira red wrap
  • Wira blue wrap
  • Wira green wrap
  • Wira yellow wrap
  • Wira orange wrap
  • Wira purple wrap
  • Wira pink wrap
  • Wira teal wrap
  • Wira brown wrap
  • Wira gold wrap
  • Wira chrome wrap
  • Wira color shift wrap
  • Wira carbon fiber wrap
  • Wira camo and patterned wrap

How much vinyl to wrap a Proton Wira

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–2009coupe, liftback, sedan (2 or 4 or 5 doors)166.1 in (4,220 mm) to 171.7 in (4,360 mm)about 49 ft (15 m) for the liftback to 74 ft (22.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m)

Wira wrap cost factors

The Wira wrap cost depends on the film amount, body style and installation work. A coupe needs more 60-inch (1.52 m) cast film than a liftback, so the material cost changes. The tall body and tailgate glass add work time for the installer. The size range of 166.1 in (4,220 mm) to 171.7 in (4,360 mm) also affects how much film is used.

  • Film for a full wrap: about 49 ft (15 m) for the liftback to 74 ft (22.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m).
  • Body: coupe, liftback, sedan (2 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (141.7 in (3,600 mm)): the roof is wrapped from a platform.

Wira wraps by generation

Swipe sideways. Tap a card for the full description.

Proton Wira, first generation, factory photo
Factory color shown

1993–2009 Wira coupe, liftback, sedan (first generation)

1993–2009coupe, liftback, sedan (2 or 4 or 5 doors)166.1 in (4,220 mm) to 171.7 in (4,360 mm)

The first generation Proton Wira, from 1993 to 2009, came in coupe, liftback and sedan styles. The style decides the panel plan and the film amount for a full wrap. The liftback needs about 49 ft (15 m) of 60-inch (1.52 m) cast film. The coupe needs about 74 ft (22.5 m), and the sedan falls between those numbers.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (141.7 in (3,600 mm)): the roof is wrapped from a platform.

Film: about 49 ft (15 m) for the liftback to 74 ft (22.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Wira

For smaller jobs on a Proton Wira, you can wrap only the roof, hood or mirror caps. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) in clear film protects the front end. These options use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Proton Wira: body, cut-outs and film

The Proton Wira vinyl wrap changes with the body style and size. The coupe, liftback and sedan (2 or 4 or 5 doors) have different panel plans, so the film amount ranges from about 49 ft (15 m) to 74 ft (22.5 m). A wrap on a longer body needs more material for the sides. The tall body, 141.7 in (3,600 mm), means the roof is wrapped from a platform.

For Wira wrap ideas, plan the tailgate with the rear glass in it where the film ends at the edge of the glass. The tall body means the roof is wrapped from a platform. Window trim and badges are good places for chrome delete with black film. The film estimate allows up to about 82 ft (25 m) for chrome or patterned film.

How much vinyl to wrap a Wira depends on the body style. The coupe takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast film, while the liftback takes about 49 ft (15 m). The sedan falls between those lengths, and its door count changes the panel plan. Chrome or patterned film can need up to about 82 ft (25 m).

Questions about wrapping a Proton Wira

How much vinyl does it take to wrap a Proton Wira?

It takes about 49 ft (15 m) to 74 ft (22.5 m) of 60-inch (1.52 m) cast film to wrap a Proton Wira. The exact amount depends on the body style, with the liftback at the low end and the coupe at the high end. Chrome or patterned film can need up to about 82 ft (25 m).

Which Wira body takes more film?

The coupe takes more film than the liftback or sedan. A Wira coupe needs about 74 ft (22.5 m) of 60-inch (1.52 m) cast film. The liftback needs about 49 ft (15 m), and the sedan falls between them.

Can I wrap only the hood or the roof of a Wira?

Yes, you can wrap only the hood or the roof of a Wira. A partial wrap is a common smaller job, along with mirror caps. A chrome delete covers window trim and badges, and paint protection film goes on the front end.

Is a Wira hard to wrap?

A Wira adds some work because of its tall body and tailgate design. The body is 141.7 in (3,600 mm) tall, so the roof is wrapped from a platform. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Those details make the install less straightforward than on a lower car.