Wraps by car

Proton Juara wrap

The Proton Juara wrap covers the one-generation minivan sold from 2001 to 2003. This small van measures 144.1 in (3,660 mm) long and has a tall body. A full vinyl wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film.

1generations16.5 mof film for a full wrap

Proton Juara, first generation, factory photo
Proton Juara, first generation. Factory color shown.

Proton Juara wrap colors and ideas

  • Juara black wrap
  • Juara white wrap
  • Juara gray wrap
  • Juara silver wrap
  • Juara red wrap
  • Juara blue wrap
  • Juara green wrap
  • Juara yellow wrap
  • Juara orange wrap
  • Juara purple wrap
  • Juara pink wrap
  • Juara teal wrap
  • Juara brown wrap
  • Juara gold wrap
  • Juara chrome wrap
  • Juara color shift wrap
  • Juara carbon fiber wrap
  • Juara camo and patterned wrap

How much vinyl to wrap a Proton Juara

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2003van (5 doors)144.1 in (3,660 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Juara wrap cost factors

Juara wrap cost depends on the van's size and the film type. The small van body uses less material than a full-size minivan, but the tall roof and sliding doors add labor. A full wrap needs about 54 ft (16.5 m) of standard film, or more for chrome or patterned film.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (71.3 in (1,810 mm)): the roof is wrapped from a platform.

Juara wraps by generation

Swipe sideways. Tap a card for the full description.

Proton Juara, first generation, factory photo
Factory color shown

2001–2003 Juara van (first generation)

2001–2003van (5 doors)144.1 in (3,660 mm)

The first generation Proton Juara has sliding side doors that shape the wrap. The door tracks stay bare, so the film is cut along them. This design leaves a clean edge but requires careful trimming around the tracks.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (71.3 in (1,810 mm)): the roof is wrapped from a platform.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Juara

A partial wrap on a Proton Juara can cover the roof, hood, or mirror caps. Chrome delete turns the bright window trim and badges black with film. Paint protection film (PPF) is clear film applied to the front end only.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Proton Juara: body, cut-outs and film

A Proton Juara vinyl wrap must be planned around the van body. The single body style is a five-door van with sliding side doors. Its compact length of 144.1 in (3,660 mm) keeps the side panels short, while the tall roof adds vertical surface area.

Juara wrap ideas start with the sliding door tracks. The tracks stay bare, and the film is cut along them so the doors keep working. The high roof of 71.3 in (1,810 mm) means the roof is wrapped from a platform.

How much vinyl to wrap a Juara depends on the film choice. A standard color change uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 62 ft (19 m).

Questions about wrapping a Proton Juara

How much vinyl does it take to wrap a Proton Juara?

A full wrap of a Proton Juara takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. This estimate covers the newest body, the only generation sold. Chrome or patterned film needs about 62 ft (19 m).

Are the sliding doors of a Juara wrapped?

No, the sliding door tracks of a Juara stay bare. The film is cut along the tracks so the doors slide freely. The door panels themselves can be wrapped.

Can I wrap only the hood or the roof of a Juara?

Yes, you can wrap only the hood or the roof of a Juara. A partial wrap can also cover the roof, hood, or mirror caps. These smaller jobs use less film than a full wrap.

Is a Juara hard to wrap?

A Juara is not especially hard to wrap, but two features add work. The sliding door tracks must stay bare and require precise cutting. The tall body means the roof is wrapped from a platform, which takes extra care.