Wraps by car

Proton Persona wrap

This page covers the Proton Persona wrap across three generations, from the 1993 first generation to the current third generation. A full wrap of the newest third-generation Persona takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises that figure to about 62 ft (19 m). The vinyl wrap options here range from color change to partial protection.

3generations16.5 mof film for a full wrap

Proton Persona, third generation, factory photo
Proton Persona, third generation. Factory color shown.

Proton Persona wrap colors and ideas

  • Persona black wrap
  • Persona white wrap
  • Persona gray wrap
  • Persona silver wrap
  • Persona red wrap
  • Persona blue wrap
  • Persona green wrap
  • Persona yellow wrap
  • Persona orange wrap
  • Persona purple wrap
  • Persona pink wrap
  • Persona teal wrap
  • Persona brown wrap
  • Persona gold wrap
  • Persona chrome wrap
  • Persona color shift wrap
  • Persona carbon fiber wrap
  • Persona camo and patterned wrap

How much vinyl to wrap a Proton Persona

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowsedan (4 doors)172.7 in (4,387 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
2007–2016sedan (4 doors)175.1 in (4,447 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
1993–2007coupe, hatchback, sedan (2 or 3 or 4 or 5 doors)157.1 in (3,990 mm) to 171.7 in (4,360 mm)about 46 ft (14 m) for the coupe to 49 ft (15 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

Persona wrap cost factors

Persona wrap cost depends on the film coverage, the generation, and the condition of the paint. A full color change on the third generation uses about 54 ft (16.5 m) of film, while the first generation can range from 46 ft (14 m) to 49 ft (15 m). Partial jobs like a roof or hood use less film but still need panel preparation. The number of cut-outs and disassembly also affects the labor time.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (4 doors).

Persona wraps by generation

Swipe sideways. Tap a card for the full description.

Proton Persona, third generation, factory photo
Factory color shown

2016–now Persona sedan (third generation)

2016–nowsedan (4 doors)172.7 in (4,387 mm)

The third-generation Proton Persona is a four-door sedan with a length of 172.7 in (4,387 mm), and its wrap needs about 54 ft (16.5 m) of film. The fixed trunk lid and four doors mean seven main side panels plus the roof, hood, and bumpers. A chrome or patterned film requires about 62 ft (19 m) because the pattern must be matched. The subcompact size keeps the film amount moderate for a full wrap.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Proton Persona, second generation, factory photo
Factory color shown

2007–2016 Persona sedan (second generation)

2007–2016sedan (4 doors)175.1 in (4,447 mm)

The second-generation Proton Persona spans 2007 to 2016, and paint age is a key factor before wrapping. These cars may have original or repainted panels, so a test spot on each panel checks paint adhesion. A full wrap on this generation takes about 49 ft (15 m) of cast film for its 175.1 in (4,447 mm) body. Older paint needs proper cleaning and sometimes paint correction before film goes on.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Proton Persona, first generation, factory photo
Factory color shown

1993–2007 Persona coupe, hatchback, sedan (first generation)

1993–2007coupe, hatchback, sedan (2 or 3 or 4 or 5 doors)157.1 in (3,990 mm) to 171.7 in (4,360 mm)

The first-generation Proton Persona offers coupe, hatchback, and sedan bodies, and the body style decides the panel plan and film amount. The coupe needs about 46 ft (14 m) of film, while the sedan takes up to 49 ft (15 m). The hatchback and coupe have a tailgate with glass, so the film ends at the glass edge. A chrome or patterned film on this generation uses up to about 61 ft (18.5 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) for the coupe to 49 ft (15 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Persona

A partial wrap on a Proton Persona can cover the roof, hood, or mirror caps without wrapping the whole car. Persona chrome delete replaces the window trim and badges with black film for a cleaner look. Paint protection film (PPF) on the front end uses clear film to guard against stone chips. These smaller jobs use less film than a full wrap and suit any generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Proton Persona: body, cut-outs and film

The Proton Persona vinyl wrap starts with its subcompact sedan body, which measures 172.7 in (4,387 mm) in the third generation. A four-door sedan has a separate trunk lid, so the rear panel is smaller than on a hatchback but the doors add film. The first generation offered coupe, hatchback, and sedan styles with lengths from 157.1 in (3,990 mm) to 171.7 in (4,360 mm). The longer second generation at 175.1 in (4,447 mm) needs slightly more film than the third.

Persona wrap ideas should account for the door handles, mirrors, and badges, which are removed or cut around. The first-generation hatchback and coupe have a tailgate with the rear glass in it, and the film ends at the edge of the glass. Sedans have a fixed rear window, so the trunk lid is wrapped as a single panel. Door trims and roof rails may also need cut-outs for a clean install.

To figure out how much vinyl to wrap a Persona, check the body style and generation first. The third generation takes about 54 ft (16.5 m) of cast film, while the longer second generation takes about 49 ft (15 m). The first generation varies from about 46 ft (14 m) for the coupe to 49 ft (15 m) for the sedan. A hatchback falls in the middle of that range.

Questions about wrapping a Proton Persona

How much vinyl does it take to wrap a Proton Persona?

A Proton Persona wrap on the third generation uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate is about 62 ft (19 m). The earlier generations range from about 46 ft (14 m) to 49 ft (15 m). The exact amount depends on the body style and how many panels are wrapped.

Can I wrap only the hood or the roof of a Persona?

Yes, you can wrap only the hood or the roof of a Persona as a partial wrap. A roof or hood wrap uses less film than a full color change and is a good way to change the look. Mirror caps and chrome delete on the window trim and badges are also possible. The first-generation hatchback tailgate can be wrapped separately, with the film ending at the glass edge.

Is a Persona hard to wrap?

A Persona is not especially hard to wrap, but the first-generation hatchback and coupe have a tailgate with glass, so the film ends at the glass edge. The subcompact sedan body has many curved panels, and door handles and badges must be removed or cut around. The third generation's 172.7 in (4,387 mm) length means a standard amount of film. Paint condition on older second-generation cars may require extra prep work.

How many generations of the Persona does this page cover?

This page covers three generations of the Proton Persona. The first generation ran from 1993 to 2007, the second from 2007 to 2016, and the third from 2016 to the present. Each generation has a different length and film amount, from 46 ft (14 m) for the first coupe to 54 ft (16.5 m) for the third sedan.