Wraps by car

Proton Tiara wrap

The Proton Tiara wrap page covers the single generation of this compact hatchback, produced from 1996 to 2000. A full color change wrap on the Tiara takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 51 ft (15.5 m) of material.

1generations12.5 mof film for a full wrap

Proton Tiara, first generation, factory photo
Proton Tiara, first generation. Factory color shown.

Proton Tiara wrap colors and ideas

  • Tiara black wrap
  • Tiara white wrap
  • Tiara gray wrap
  • Tiara silver wrap
  • Tiara red wrap
  • Tiara blue wrap
  • Tiara green wrap
  • Tiara yellow wrap
  • Tiara orange wrap
  • Tiara purple wrap
  • Tiara pink wrap
  • Tiara teal wrap
  • Tiara brown wrap
  • Tiara gold wrap
  • Tiara chrome wrap
  • Tiara color shift wrap
  • Tiara carbon fiber wrap
  • Tiara camo and patterned wrap

How much vinyl to wrap a Proton Tiara

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2000hatchback (5 doors)138.8 in (3,525 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

Tiara wrap cost factors

Tiara wrap cost depends on the size of the car, the film type, and how many panels are covered. The full wrap uses about 41 ft (12.5 m) of cast film, while partial jobs take less material and less labor. The age of the paint can add preparation time if panels are rough or repainted. A chrome delete or paint protection film on the front end changes the total cost because those are separate jobs.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Tiara wraps by generation

Swipe sideways. Tap a card for the full description.

Proton Tiara, first generation, factory photo
Factory color shown

1996–2000 Tiara hatchback (first generation)

1996–2000hatchback (5 doors)138.8 in (3,525 mm)

The first generation Proton Tiara was built from 1996 to 2000 as a five-door hatchback. Paint age matters on a car of these years: panels may be original or repainted. A test spot comes before a full wrap to check how the film and adhesive behave on the existing paint. If the paint is weak, the wrap can lift it when the film is removed.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on a Tiara

A partial wrap on a Tiara can cover the roof, hood, or mirror caps for a two-tone look. Tiara chrome delete covers the window trim and badges with black film for a cleaner appearance. Paint protection film is clear film on the front end to guard the hood, bumper, and mirrors from stone chips. These smaller jobs let you change the look without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Proton Tiara: body, cut-outs and film

The Proton Tiara vinyl wrap suits a five-door hatchback body measuring 138.8 in (3,525 mm) in length. Its compact size keeps material use low compared with larger cars. The simple shape has few deep recesses, so film lays down with less stretching. A full wrap still requires careful work around the tailgate and glass.

Tiara wrap ideas include a full color change, partial accents, chrome delete, or paint protection film. The tailgate carries the rear glass, so the film ends at the edge of the glass to keep the wrap clean. Door handles, badges, and mirrors can be removed for better film adhesion and a neater finish. If you plan a chrome delete, the window trim and badges are the main bright parts to cover.

When you count how much vinyl to wrap a Tiara, the single generation from 1996 to 2000 gives one body style. There are no major size differences between early and late cars of this production run. You can order the same film quantity for any Tiara hatchback. Panel variations from repairs or paint work may change how much film a shop uses in practice.

Questions about wrapping a Proton Tiara

How much vinyl does it take to wrap a Proton Tiara?

Yes, a full wrap on a Proton Tiara takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the estimate rises to about 51 ft (15.5 m) because of pattern matching.

Can I wrap only the hood or the roof of a Tiara?

Yes, you can wrap only the hood or the roof of a Tiara. These are the most common partial wrap areas along with mirror caps, and they need much less film than a full wrap.

Is a Tiara hard to wrap?

Yes, the Proton Tiara is hard to wrap in one specific area: the tailgate has the rear glass in it, so the film ends at the edge of the glass. The car's small size of 138.8 in (3,525 mm) makes the rest of the body easier, but the tailgate adds careful trimming work.

How many generations of the Tiara does this page cover?

This page covers one generation of the Proton Tiara, produced from 1996 to 2000. All Tiara hatchbacks share the same body style and dimensions.