Wraps by car

Subaru 1000 wrap

The Subaru 1000 wrap page covers the first-generation sedan and wagon built from 1965 to 1969. A full vinyl wrap of the newest body takes about 43 ft (13 m) of film for the sedan and up to 48 ft (14.5 m) for the wagon. The page explains how the body styles change the film amount and what a color change wrap involves.

1generations13 mof film for a full wrap

Subaru 1000, first generation, factory photo
Subaru 1000, first generation. Factory color shown.

Subaru 1000 wrap colors and ideas

  • Subaru 1000 black wrap
  • Subaru 1000 white wrap
  • Subaru 1000 gray wrap
  • Subaru 1000 silver wrap
  • Subaru 1000 red wrap
  • Subaru 1000 blue wrap
  • Subaru 1000 green wrap
  • Subaru 1000 yellow wrap
  • Subaru 1000 orange wrap
  • Subaru 1000 purple wrap
  • Subaru 1000 pink wrap
  • Subaru 1000 teal wrap
  • Subaru 1000 brown wrap
  • Subaru 1000 gold wrap
  • Subaru 1000 chrome wrap
  • Subaru 1000 color shift wrap
  • Subaru 1000 carbon fiber wrap
  • Subaru 1000 camo and patterned wrap

How much vinyl to wrap a Subaru 1000

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1965–1969sedan, wagon (2 or 4 or 5 doors)154.7 in (3,930 mm)about 43 ft (13 m) for the sedan to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

Subaru 1000 wrap cost factors

The Subaru 1000 wrap cost depends on the body style, the film type, and the amount of prep work. The wagon takes more film than the sedan: up to 48 ft (14.5 m) against about 43 ft (13 m). A chrome delete or patterned film adds material up to about 61 ft (18.5 m). The tailgate with the rear glass in it needs careful trimming, which adds labor.

  • Film for a full wrap: about 43 ft (13 m) for the sedan to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).
  • Body: sedan, wagon (2 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Subaru 1000 wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru 1000, first generation, factory photo
Factory color shown

1965–1969 Subaru 1000 sedan, wagon (first generation)

1965–1969sedan, wagon (2 or 4 or 5 doors)154.7 in (3,930 mm)

The first generation Subaru 1000 was offered as a sedan and a wagon from 1965 to 1969. The style decides the panel plan and the film amount: the sedan needs about 43 ft (13 m) of film and the wagon needs up to 48 ft (14.5 m). The wagon has a larger rear side and tailgate area, so it uses more material. Both share the same 60-inch (1.52 m) film width.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) for the sedan to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Subaru 1000

A partial wrap on a Subaru 1000 can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less film than a full wrap and still change the look or protect the paint.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Subaru 1000: body, cut-outs and film

A Subaru 1000 vinyl wrap starts with knowing the body style and size. The sedan is 154.7 in (3,930 mm) long and needs about 43 ft (13 m) of 60-inch (1.52 m) film. The wagon has a taller rear body and uses up to 48 ft (14.5 m) of the same film. These numbers are for a full color change wrap on painted panels only.

Subaru 1000 wrap ideas include a full color change, chrome delete, or paint protection film (PPF) on the front end. The tailgate has the rear glass set into it, so the film ends at the edge of the glass. No other factory parts on this car need cut-outs, but badges and trim come off for a clean edge. A skilled installer can wrap the tailgate without removing the glass.

To know how much vinyl to wrap a Subaru 1000, you compare the sedan and wagon. The sedan takes about 43 ft (13 m) of film and the wagon takes up to 48 ft (14.5 m). Both use 60-inch (1.52 m) cast film for the main body color. If you add chrome or patterned film, the total can go up to about 61 ft (18.5 m).

Questions about wrapping a Subaru 1000

How much vinyl does it take to wrap a Subaru 1000?

A full wrap of a Subaru 1000 takes about 43 ft (13 m) of vinyl for the sedan and up to 48 ft (14.5 m) for the wagon. The film is 60-inch (1.52 m) wide cast vinyl. If you add chrome or patterned film, the total can go up to about 61 ft (18.5 m). These figures cover the painted body panels only.

Which Subaru 1000 body takes more film?

The wagon takes more film than the sedan: up to 48 ft (14.5 m) against about 43 ft (13 m). The wagon has a taller rear body and a larger tailgate area. Both use 60-inch (1.52 m) film. The extra film goes into the rear side panels and the tailgate.

Can I wrap only the hood or the roof of a Subaru 1000?

Yes, you can wrap only the hood or the roof of a Subaru 1000. Partial wraps cover the roof, hood, or mirror caps. A hood wrap uses less film than a full wrap and is a good way to try a color. The hood can be wrapped with a single piece of 60-inch (1.52 m) film.

Is a Subaru 1000 hard to wrap?

A Subaru 1000 is not hard to wrap, but the tailgate with the rear glass in it adds work. The film must end at the edge of the glass, so the installer trims carefully around it. The body is compact at 154.7 in (3,930 mm) long, so panels are small and easy to handle. No complex bumpers or deep recesses are present.