Wraps by car

Subaru Bistro wrap

This page covers the Subaru Bistro, a mini hatchback made from 1995 to 1998 and listed here as one generation. A full vinyl wrap of this five-door body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. Choosing chrome or patterned film raises the estimate to about 48 ft (14.5 m).

1generations11.5 mof film for a full wrap

Subaru Bistro, first generation, factory photo
Subaru Bistro, first generation. Factory color shown.

Subaru Bistro wrap colors and ideas

  • Bistro black wrap
  • Bistro white wrap
  • Bistro gray wrap
  • Bistro silver wrap
  • Bistro red wrap
  • Bistro blue wrap
  • Bistro green wrap
  • Bistro yellow wrap
  • Bistro orange wrap
  • Bistro purple wrap
  • Bistro pink wrap
  • Bistro teal wrap
  • Bistro brown wrap
  • Bistro gold wrap
  • Bistro chrome wrap
  • Bistro color shift wrap
  • Bistro carbon fiber wrap
  • Bistro camo and patterned wrap

How much vinyl to wrap a Subaru Bistro

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1995–1998hatchback (5 doors)129.9 in (3,300 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Bistro wrap cost factors

The Bistro wrap cost depends mostly on the condition of a car built between 1995 and 1998, because old paint may need extra prep. Paint that is original or repainted must be tested in a small spot before the full wrap. The amount of film is fixed at about 38 ft (11.5 m) for the standard color change, and chrome or patterned film pushes that to about 48 ft (14.5 m). The number of cut-outs and removed parts, like the tailgate glass edge and badges, also affects the labor.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Bistro wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru Bistro, first generation, factory photo
Factory color shown

1995–1998 Bistro hatchback (first generation)

1995–1998hatchback (5 doors)129.9 in (3,300 mm)

The first-generation Subaru Bistro ran from 1995 to 1998 as a five-door hatchback. On a car this age, paint may be original or repainted, and a test spot before a full wrap shows whether the film will bond properly. Checking the paint first also tells you if the body needs more cleaning or priming before the vinyl goes on.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Bistro

Partial wraps on a Subaru Bistro can cover the roof, hood or mirror caps, and a chrome delete uses black film on the window trim and badges. Paint protection film (PPF) is another option: clear film on the front end guards against stone chips. All these jobs use less material than a full wrap and still change the look or protect the paint.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Subaru Bistro: body, cut-outs and film

A Subaru Bistro vinyl wrap has to deal with a small, boxy body that measures 129.9 in (3,300 mm) long. The short roof and straight sides keep panel sizes modest, so a full wrap stays close to the 38 ft (11.5 m) estimate. Five doors add seams around the handles and edges, but the flat surfaces make laying film straightforward.

The main Bistro wrap ideas come down to the tailgate, whose rear glass sits in the metal frame and the film ends at the edge of the glass. Installers cut around the glass rather than trying to bridge it, which keeps the tailgate wrap clean. The door handles, mirrors and badges also need cut-outs or removal for a smooth finish.

If you want to know how much vinyl to wrap a Bistro, the answer stays the same for every year of this single generation. The catalog lists only the 1995–1998 hatchback, so there are no longer or shorter bodies to compare. Ordering about 38 ft (11.5 m) of standard cast film covers the whole car with room for mistakes.

Questions about wrapping a Subaru Bistro

How much vinyl does it take to wrap a Subaru Bistro?

It takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film to wrap a Subaru Bistro. That figure covers a full color change on the only body style, the 1995–1998 hatchback. If you pick chrome or patterned film, plan for about 48 ft (14.5 m) to match the pattern or finish.

Can I wrap only the hood or the roof of a Bistro?

Yes, you can wrap only the hood, the roof or the mirror caps of a Bistro. These partial wraps use far less film than the full 38 ft (11.5 m) and let you test a color or finish on a small area. A chrome delete on the window trim and badges is another small job that changes the look without a full wrap.

Is a Bistro hard to wrap?

A Bistro is not especially hard to wrap, but the tailgate adds one extra step because the rear glass sits in the metal and the film must end at the edge of the glass. Its small size, just 129.9 in (3,300 mm) long, means panels are short and easy to handle. The door handles, mirrors and badges still need cut-outs or removal, which is standard for any car.

How many generations of the Bistro does this page cover?

This page covers one generation of the Subaru Bistro, the first generation made from 1995 to 1998. It is the only generation in the catalog, and every body style in it is the same five-door hatchback. All the film estimates on this page are for that single body.