Wraps by car

Subaru Brat wrap

The Subaru Brat wrap page covers both generations of this compact pickup. The catalog lists the 1978–1981 first generation and the 1981–1992 second generation. A full color change wrap of the newest body takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film.

2generations13.5 mof film for a full wrap

Subaru Brat, second generation, factory photo
Subaru Brat, second generation. Factory color shown.

Subaru Brat wrap colors and ideas

  • Brat black wrap
  • Brat white wrap
  • Brat gray wrap
  • Brat silver wrap
  • Brat red wrap
  • Brat blue wrap
  • Brat green wrap
  • Brat yellow wrap
  • Brat orange wrap
  • Brat purple wrap
  • Brat pink wrap
  • Brat teal wrap
  • Brat brown wrap
  • Brat gold wrap
  • Brat chrome wrap
  • Brat color shift wrap
  • Brat carbon fiber wrap
  • Brat camo and patterned wrap

How much vinyl to wrap a Subaru Brat

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1981–1992pickup (2 doors)174.2 in (4,424 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
1978–1981pickup (2 doors)174.2 in (4,424 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Brat wrap cost factors

Brat wrap cost depends on the film type, the amount of trim, and the condition of the paint. A full wrap uses about 44 ft (13.5 m) of 60-inch (1.52 m) cast film, and a chrome or patterned film uses about 59 ft (18 m). The two long doors and separate bed add labor compared with a compact car.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: pickup (2 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • Two long side doors: each door is one large piece of film.

Brat wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru Brat, second generation, factory photo
Factory color shown

1981–1992 Brat pickup (second generation)

1981–1992pickup (2 doors)174.2 in (4,424 mm)

The second generation Subaru Brat, produced from 1981 to 1992, is a pickup with two doors. The cab and the bed are two bodies for the film, and the inside of the bed stays bare. Its length of 174.2 in (4,424 mm) is the same as the earlier generation.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Two long side doors: each door is one large piece of film.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Subaru Brat, first generation, factory photo
Factory color shown

1978–1981 Brat pickup (first generation)

1978–1981pickup (2 doors)174.2 in (4,424 mm)

The first generation Subaru Brat, produced from 1978 to 1981, is a two-door pickup. Paint age matters on a car of these years, as panels may be original or repainted. A test spot comes before a full wrap to check film adhesion.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Two long side doors: each door is one large piece of film.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Brat

Partial wrap on a Subaru Brat can cover the roof, hood, or mirror caps. Brat chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film installed on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Subaru Brat: body, cut-outs and film

The Subaru Brat vinyl wrap covers a two-door pickup body with a separate cargo bed. Both generations measure 174.2 in (4,424 mm) long and have two long side doors. Each door is one large piece of film, and the bed is wrapped as its own body.

Brat wrap ideas begin with the pickup bed, where the cab and bed are wrapped as two separate bodies. The inside of the bed is not wrapped, so the exterior panels stay the focus. The long side doors allow one-piece color changes or large accent sections.

To know how much vinyl to wrap a Brat, compare the two generations in the catalog. Both list the same body size and use about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned film estimate is higher: about 59 ft (18 m).

Questions about wrapping a Subaru Brat

How much vinyl does it take to wrap a Subaru Brat?

A full wrap of a Subaru Brat takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. That figure is for a color change on the newest body. A chrome or patterned film estimate is about 59 ft (18 m).

Is the bed of a Brat wrapped?

The bed of a Brat is not wrapped on the inside. Only the exterior surfaces of the cab and bed are covered, as the inside of the bed stays bare.

Can I wrap only the hood or the roof of a Brat?

Yes, a hood or roof can be wrapped alone on a Subaru Brat. A partial wrap covers the roof, hood, or mirror caps, and chrome delete covers window trim and badges.

Is a Brat hard to wrap?

A Brat is not especially hard to wrap, but it adds work in two areas. The cab and bed are wrapped as two separate bodies, and the two long side doors each need one large piece of film.