Wraps by car

Subaru Domingo wrap

The Subaru Domingo wrap page covers both generations of this tall minivan and the vinyl wrap film they need. The newest body is the second generation, produced from 1994 to 1998, and the first generation ran from 1983 to 1991. A full wrap of the second generation takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases that to about 59 ft (18 m).

2generations16 mof film for a full wrap

Subaru Domingo, second generation, factory photo
Subaru Domingo, second generation. Factory color shown.

Subaru Domingo wrap colors and ideas

  • Domingo black wrap
  • Domingo white wrap
  • Domingo gray wrap
  • Domingo silver wrap
  • Domingo red wrap
  • Domingo blue wrap
  • Domingo green wrap
  • Domingo yellow wrap
  • Domingo orange wrap
  • Domingo purple wrap
  • Domingo pink wrap
  • Domingo teal wrap
  • Domingo brown wrap
  • Domingo gold wrap
  • Domingo chrome wrap
  • Domingo color shift wrap
  • Domingo carbon fiber wrap
  • Domingo camo and patterned wrap

How much vinyl to wrap a Subaru Domingo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1994–1998van (5 doors)138.8 in (3,525 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
1983–1991van (5 doors)134.8 in (3,425 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Domingo wrap cost factors

A Domingo wrap cost is set by the amount of film, the time the installer spends on the tall body, and the generation of the van. The second generation uses about 52 ft (16 m) of 60-inch (1.52 m) cast film, while a chrome or patterned film takes about 59 ft (18 m). The sliding doors add cutting and fitting time around the tracks, and the height means work from a platform. Paint condition also matters, especially on first-generation vans from 1983 to 1991.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (75.8 in (1,925 mm)): the roof is wrapped from a platform.

Domingo wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru Domingo, second generation, factory photo
Factory color shown

1994–1998 Domingo van (second generation)

1994–1998van (5 doors)138.8 in (3,525 mm)

The second generation Subaru Domingo, built from 1994 to 1998, has sliding side doors that are wrapped up to the tracks. The tracks stay bare because the door mechanism must move freely, and they decide where the film edge is cut. The film is trimmed along the upper and lower edges of each track. This leaves a clean line that follows the factory bodywork.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (75.8 in (1,925 mm)): the roof is wrapped from a platform.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Subaru Domingo, first generation, factory photo
Factory color shown

1983–1991 Domingo van (first generation)

1983–1991van (5 doors)134.8 in (3,425 mm)

The first generation Subaru Domingo, built from 1983 to 1991, often has paint that is old or has been repainted in places. Before a full wrap, a test spot is applied to check how the film adheres to the original or repainted panels. A test spot shows whether the surface is stable enough for vinyl wrap film. This step helps avoid lifting or damage when the film is removed.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (73.6 in (1,870 mm)): the roof is wrapped from a platform.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Domingo

On a Subaru Domingo you can wrap only the roof, the hood, or the mirror caps as a partial wrap. A Domingo chrome delete covers the window trim and badges with black film instead of a full body wrap. Paint protection film (PPF) is another option, with clear film applied to the front end of the van. These smaller jobs use less material and take less time than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Subaru Domingo: body, cut-outs and film

A Subaru Domingo vinyl wrap has to account for a five-door van body that is tall and fairly short. The second generation is 138.8 in (3,525 mm) long and 75.8 in (1,925 mm) high. The first generation is slightly smaller at 134.8 in (3,425 mm) long and 73.6 in (1,870 mm) high. These dimensions mean the roof is a large single panel and the sides are tall, so film is cut in long vertical pieces.

Domingo wrap ideas start with the sliding side doors, where the door tracks stay bare and the film is cut along them. The roof and upper body are tall, so installers work from a platform to reach them safely. Cut-outs are needed for the door handles, mirrors, lights, badges, and the sliding door tracks. The roof rails, if fitted, are removed before wrapping the roof panel.

How much vinyl to wrap a Domingo depends on the generation because the bodies differ in length and height. The second generation, built from 1994 to 1998, needs about 52 ft (16 m) of 60-inch (1.52 m) cast film for a full color change wrap. The first generation, built from 1983 to 1991, needs about 51 ft (15.5 m) of the same film width. The second generation is 4 inches (100 mm) longer and 2.2 inches (55 mm) taller, which is why the film estimate is slightly larger.

Questions about wrapping a Subaru Domingo

How much vinyl does it take to wrap a Subaru Domingo?

A full wrap of the latest Subaru Domingo, the second generation from 1994 to 1998, takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. If you choose a chrome or patterned film, the amount rises to about 59 ft (18 m). The first generation from 1983 to 1991 needs about 51 ft (15.5 m) or 57 ft (17.5 m) respectively.

Are the sliding doors of a Domingo wrapped?

Yes, the sliding doors of a Subaru Domingo are wrapped, but the door tracks stay bare. The film is cut along the upper and lower edges of each track so the doors can slide without interference. The tracks become visible lines on the wrapped body. This is done the same way on both generations.

Can I wrap only the hood or the roof of a Domingo?

Yes, you can wrap only the hood or the roof of a Subaru Domingo as a partial wrap. The roof is a large panel that can be wrapped on its own, and the hood is also a single piece suitable for film. Mirror caps are another small area often wrapped separately. These partial jobs use much less film than a full wrap.

Is a Domingo hard to wrap?

A Subaru Domingo is not the easiest van to wrap because it is tall and has sliding doors. The roof is high and requires work from a platform, and the sliding door tracks mean extra cutting and careful alignment. Its five-door van body has many edges and cut-outs for lights and handles. These points add time compared to a lower car with normal doors.