Wraps by car

Subaru Legacy Lancaster wrap

The Subaru Legacy Lancaster wrap page covers the two generations of this mid-size wagon built from 1995 to 2003. A full vinyl wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 8 ft (2.4 m) to the estimate. Both generations share the same wagon body style and similar overall length.

2generations19.5 mof film for a full wrap

Subaru Legacy Lancaster, second generation, factory photo
Subaru Legacy Lancaster, second generation. Factory color shown.

Subaru Legacy Lancaster wrap colors and ideas

  • Legacy Lancaster black wrap
  • Legacy Lancaster white wrap
  • Legacy Lancaster gray wrap
  • Legacy Lancaster silver wrap
  • Legacy Lancaster red wrap
  • Legacy Lancaster blue wrap
  • Legacy Lancaster green wrap
  • Legacy Lancaster yellow wrap
  • Legacy Lancaster orange wrap
  • Legacy Lancaster purple wrap
  • Legacy Lancaster pink wrap
  • Legacy Lancaster teal wrap
  • Legacy Lancaster brown wrap
  • Legacy Lancaster gold wrap
  • Legacy Lancaster chrome wrap
  • Legacy Lancaster color shift wrap
  • Legacy Lancaster carbon fiber wrap
  • Legacy Lancaster camo and patterned wrap

How much vinyl to wrap a Subaru Legacy Lancaster

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2003wagon (5 doors)185.8 in (4,720 mm) to 187.0 in (4,750 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
1995–1998wagon (5 doors)185.8 in (4,720 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Legacy Lancaster wrap cost factors

Legacy Lancaster wrap cost depends on the film area, which is about 64 ft (19.5 m) for a full wrap, and on the film type: cast color change, chrome, or patterned. A chrome or patterned film needs about 72 ft (22 m) because the pattern must be matched. The condition of the paint, especially on a first-generation car, can add preparation work. Removing trim and badges also affects the final cost.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2001: bumpers and lights differ between the versions, and so do the film cuts.

Legacy Lancaster wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru Legacy Lancaster, second generation, factory photo
Factory color shown

1998–2003 Legacy Lancaster wagon (second generation)

1998–2003wagon (5 doors)185.8 in (4,720 mm) to 187.0 in (4,750 mm)

The second-generation Subaru Legacy Lancaster was restyled in 2001 with new bumpers and lights. Film cut for a pre-2001 car does not fit a 2001–2003 car, and the reverse is also true. Wrap kits and templates are specific to each version. The film amount remains the same, but the patterns differ.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Subaru Legacy Lancaster, first generation, factory photo
Factory color shown

1995–1998 Legacy Lancaster wagon (first generation)

1995–1998wagon (5 doors)185.8 in (4,720 mm)

The first-generation Subaru Legacy Lancaster built from 1995 to 1998 often has aged paint. Panels may be original or repainted, and adhesion can vary across the car. A test spot on a panel comes before a full wrap to check how the film sticks. This step helps avoid lifting or damage when the film is removed.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Legacy Lancaster

Partial wrap options for a Legacy Lancaster include the roof, hood, and mirror caps. Legacy Lancaster chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. Any of these jobs uses less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Subaru Legacy Lancaster: body, cut-outs and film

A Subaru Legacy Lancaster vinyl wrap is a mid-size five-door wagon with a single body style, so there are no sedan or coupe variations to account for. The car measures 185.8 in (4,720 mm) to 187.0 in (4,750 mm) long, which puts it in a typical range for a wagon wrap. The tall rear section and large side glass mean the film is worked around fixed windows and a long roof. These dimensions make a full wrap a straightforward but sizable job.

Legacy Lancaster wrap ideas start with the tailgate: the rear glass is set into the tailgate, and the film ends at the edge of the glass. The door handles, badges, and antenna may need cut-outs or removal. The roof rails, if fitted, require careful trimming or temporary removal. The side mirrors come off for a cleaner edge, and the bumpers are wrapped in sections.

To know how much vinyl to wrap a Legacy Lancaster, compare the two generations: the first generation (1995–1998) and the second generation (1998–2003) both use the same film amounts. The second generation grew slightly to 187.0 in (4,750 mm) after its 2001 restyling, but the film estimate stays about 64 ft (19.5 m). For a car of either generation, the same 60-inch (1.52 m) roll width works. The only real difference is the shape of the bumpers and lights after 2001.

Questions about wrapping a Subaru Legacy Lancaster

How much vinyl does it take to wrap a Subaru Legacy Lancaster?

A full wrap of a Subaru Legacy Lancaster takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 72 ft (22 m) because the pattern must be matched. These figures apply to the newest body, which is the second generation from 1998 to 2003. The first generation uses the same amount.

Which years of the Legacy Lancaster take the same film cuts?

The Legacy Lancaster years that take the same film cuts are 1995–2000, before the 2001 restyling, and 2001–2003 after the restyling. The restyling changed the bumpers and lights, so film cuts differ between those two periods. Within each period, the cuts are the same. The first generation cars from 1995–1998 share cuts with the early second generation from 1998–2000.

Can I wrap only the hood or the roof of a Legacy Lancaster?

Yes, you can wrap only the hood or the roof of a Legacy Lancaster. The roof and hood are common partial wrap areas, along with mirror caps. A partial wrap uses less film than a full wrap and can be done as a standalone job.

Is a Legacy Lancaster hard to wrap?

A Legacy Lancaster adds some work because the tailgate has rear glass set into it, so the film must end at the edge of the glass. The car is mid-size at 185.8 in (4,720 mm) to 187.0 in (4,750 mm), which is a typical wagon length. The roof rails and trim also need careful cutting or removal. Overall it is not exceptionally hard, but it requires attention to the tailgate and roof area.