Wraps by car

Subaru Leone wrap

The Subaru Leone wrap page covers three generations of the compact car, from 1971 to 1994. A vinyl wrap of the newest Leone body takes about 46 ft (14 m) for the coupe and 52 ft (16 m) for the wagon. The film width is 60 inches (1.52 m). Chrome or patterned film increases the estimate to about 67 ft (20.5 m).

3generations14 mof film for a full wrap

Subaru Leone, third generation, factory photo
Subaru Leone, third generation. Factory color shown.

Subaru Leone wrap colors and ideas

  • Leone black wrap
  • Leone white wrap
  • Leone gray wrap
  • Leone silver wrap
  • Leone red wrap
  • Leone blue wrap
  • Leone green wrap
  • Leone yellow wrap
  • Leone orange wrap
  • Leone purple wrap
  • Leone pink wrap
  • Leone teal wrap
  • Leone brown wrap
  • Leone gold wrap
  • Leone chrome wrap
  • Leone color shift wrap
  • Leone carbon fiber wrap
  • Leone camo and patterned wrap

How much vinyl to wrap a Subaru Leone

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1984–1994coupe, sedan, wagon (2 or 4 or 5 doors)172.0 in (4,370 mm) to 173.6 in (4,410 mm)about 46 ft (14 m) for the coupe to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)
1979–1984coupe, hatchback, sedan, wagon (2 or 3 or 4 or 5 doors)152.0 in (3,860 mm) to 173.6 in (4,410 mm)about 44 ft (13.5 m) for the hatchback to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)
1971–1981coupe, sedan, wagon (2 or 4 or 5 doors)157.3 in (3,995 mm)about 43 ft (13 m) for the coupe to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

Leone wrap cost factors

Leone wrap cost depends on the film amount, body style, and the car's paint condition. A wagon needs more film than a coupe, and chrome or patterned film adds material. The third generation spans 172.0 in (4,370 mm) to 173.6 in (4,410 mm), so panel sizes are consistent. Paint age affects preparation time on a car from 1971 to 1994.

  • Film for a full wrap: about 46 ft (14 m) for the coupe to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
  • Body: coupe, sedan, wagon (2 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Leone wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru Leone, third generation, factory photo
Factory color shown

1984–1994 Leone coupe, sedan, wagon (third generation)

1984–1994coupe, sedan, wagon (2 or 4 or 5 doors)172.0 in (4,370 mm) to 173.6 in (4,410 mm)

The third generation Subaru Leone from 1984 to 1994 was offered as a coupe, sedan, and wagon. The body style decides the panel plan and the film amount for a wrap. A wagon uses about 52 ft (16 m) of 60-inch film, while a coupe uses about 46 ft (14 m). Longer roofs on the wagon add a large horizontal panel.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) for the coupe to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Subaru Leone, second generation, factory photo
Factory color shown

1979–1984 Leone coupe, hatchback, sedan, wagon (second generation)

1979–1984coupe, hatchback, sedan, wagon (2 or 3 or 4 or 5 doors)152.0 in (3,860 mm) to 173.6 in (4,410 mm)

The second generation Subaru Leone from 1979 to 1984 is often wrapped on paint that is original or repainted. A test spot comes before a full wrap to check adhesion on older paint. The hatchback and sedan differ in film amount by about 7 ft (2 m). This generation includes a hatchback style not found in the first generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) for the hatchback to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Subaru Leone, first generation, factory photo
Factory color shown

1971–1981 Leone coupe, sedan, wagon (first generation)

1971–1981coupe, sedan, wagon (2 or 4 or 5 doors)157.3 in (3,995 mm)

The first generation Subaru Leone body covers production years 1971 to 1981. Its years overlap with the second generation from 1979 to 1981, so an owner of a car from those years checks which body it is. The first generation has a uniform length of 157.3 in (3,995 mm). A wagon from this generation needs about 48 ft (14.5 m) of film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) for the coupe to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Leone

A partial wrap on a Subaru Leone includes the roof, hood, and mirror caps. Leone chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These jobs use less material than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Subaru Leone: body, cut-outs and film

The Subaru Leone vinyl wrap estimate depends on the body style and door count. The coupe, sedan, and wagon lengths range from 152.0 in (3,860 mm) to 173.6 in (4,410 mm) across generations. Longer bodies and vertical tailgates add surface area that uses more film. The wrap plan changes with two, three, four, or five doors.

Leone wrap ideas must account for the tailgate with rear glass, where the film ends at the glass edge. The rear panel needs a precise cut around the window. The tailgate itself is one large wrapped surface that benefits from a single piece of film. Door handles, mirrors, and badges are removed or cut out during installation.

How much vinyl to wrap a Leone changes between generations because body lengths and styles differ. The first generation needs about 43 ft (13 m) for the coupe and 48 ft (14.5 m) for the wagon. The second generation ranges from 44 ft (13.5 m) for the hatchback to 51 ft (15.5 m) for the wagon. Chrome or patterned film on the first generation is up to 61 ft (18.5 m).

Questions about wrapping a Subaru Leone

How much vinyl does it take to wrap a Subaru Leone?

A Subaru Leone takes about 46 ft (14 m) for the coupe and 52 ft (16 m) for the wagon. The estimate uses 60-inch (1.52 m) cast film for the newest body from 1984 to 1994. Chrome or patterned film raises the figure to about 67 ft (20.5 m).

Which Leone body takes more film?

The Leone wagon takes more film than the coupe in every generation. In the third generation the wagon needs about 52 ft (16 m) and the coupe about 46 ft (14 m). The second generation ranges from 44 ft (13.5 m) for the hatchback to 51 ft (15.5 m) for the wagon.

Can I wrap only the hood or the roof of a Leone?

Yes, you can wrap only the hood or the roof of a Leone. A partial wrap can cover the roof, hood, and mirror caps. The roof and hood are flat panels that use a small amount of film. A partial job leaves the rest of the paint exposed.

Is a Leone hard to wrap?

A Leone is not the hardest car to wrap, but the tailgate with rear glass adds work. The film must end at the edge of the glass on that panel. The compact size keeps the total film amount under 52 ft (16 m). Older paint may need extra cleaning before the wrap.