Wraps by car

Subaru Libero wrap

The Subaru Libero wrap page covers the first-generation Subaru Libero (1984–1998), a 5-door van. A full wrap of this body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 59 ft (18 m).

1generations16 mof film for a full wrap

Subaru Libero, first generation, factory photo
Subaru Libero, first generation. Factory color shown.

Subaru Libero wrap colors and ideas

  • Libero black wrap
  • Libero white wrap
  • Libero gray wrap
  • Libero silver wrap
  • Libero red wrap
  • Libero blue wrap
  • Libero green wrap
  • Libero yellow wrap
  • Libero orange wrap
  • Libero purple wrap
  • Libero pink wrap
  • Libero teal wrap
  • Libero brown wrap
  • Libero gold wrap
  • Libero chrome wrap
  • Libero color shift wrap
  • Libero carbon fiber wrap
  • Libero camo and patterned wrap

How much vinyl to wrap a Subaru Libero

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1984–1998van (5 doors)138.8 in (3,525 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Libero wrap cost factors

Libero wrap cost is driven by the amount of film and the labor for its tall, boxy body. At 138.8 in (3,525 mm) long and 75.8 in (1,925 mm) tall, the van uses about 52 ft (16 m) of vinyl for a full wrap. Chrome delete on the window trim and badges adds small pieces but extra cutting time. Removing the mirror caps also adds labor.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (75.8 in (1,925 mm)): the roof is wrapped from a platform.

Libero wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru Libero, first generation, factory photo
Factory color shown

1984–1998 Libero van (first generation)

1984–1998van (5 doors)138.8 in (3,525 mm)

The first-generation Subaru Libero (1984–1998) has sliding side doors with tracks that stay bare, so the film edge follows the track line. The installer cuts the vinyl along the track, leaving the metal channel exposed for smooth door operation. The body is tall at 75.8 in (1,925 mm), so the roof is wrapped from a platform. The van's length of 138.8 in (3,525 mm) means a full wrap uses about 52 ft (16 m) of film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (75.8 in (1,925 mm)): the roof is wrapped from a platform.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Libero

A partial wrap on a Subaru Libero can cover the roof, hood, or mirror caps with less film than a full body wrap. A Libero chrome delete covers the window trim and badges with black film for a changed look. Paint protection film (PPF) is clear film on the front end to guard against stone chips. Each partial job is priced by the area and the time to cut around the sliding door tracks.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Subaru Libero: body, cut-outs and film

A Subaru Libero vinyl wrap has to cover a boxy five-door body that is 138.8 in (3,525 mm) long. The tall roof and large flat panels increase the amount of film needed. The sliding side doors require careful cutting around the tracks. The straight sides make laying film simple compared to curved cars.

Libero wrap ideas often include covering the large roof and hood in a contrasting color. The sliding door tracks stay bare, so the film edge runs along them in a clean line. The window trim and badges can be covered with black film for a chrome delete. The mirrors come off for a neat wrap around the caps.

How much vinyl to wrap a Libero depends on which parts are covered, because the first generation (1984–1998) kept the same body size. A full wrap uses about 52 ft (16 m) of 60-inch (1.52 m) film. A roof and hood job needs far less than the full 52 ft (16 m). The tall body means extra film for the roof from a platform.

Questions about wrapping a Subaru Libero

How much vinyl does it take to wrap a Subaru Libero?

A full Subaru Libero wrap takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate is about 59 ft (18 m). The tall body and long roof increase the amount compared to a small hatchback.

Are the sliding doors of a Libero wrapped?

The sliding doors themselves are wrapped, but the tracks stay bare. The film is cut along the track line so the door can slide freely. This leaves a clean edge that follows the van's body line.

Can I wrap only the hood or the roof of a Libero?

Yes, you can wrap only the hood or the roof of a Libero. A roof wrap covers the large panel above the tall body, often in a contrasting color. A hood wrap protects the front panel and changes the look without a full wrap.

Is a Libero hard to wrap?

A Libero is moderately hard to wrap because of its tall body and sliding door tracks. The roof at 75.8 in (1,925 mm) high needs a platform, and the installer must cut carefully around the door tracks. The large flat sides are straightforward, but the overall size means more film to handle.