Wraps by car

Subaru Rex wrap

This page covers the Subaru Rex vinyl wrap across all three generations, from 1972 to 1992. The newest body, the third generation, needs about 36 ft (11 m) of 60-inch (1.52 m) cast film for a full wrap. A chrome or patterned film raises that to about 48 ft (14.5 m).

3generations11 mof film for a full wrap

Subaru Rex, third generation, factory photo
Subaru Rex, third generation. Factory color shown.

Subaru Rex wrap colors and ideas

  • Rex black wrap
  • Rex white wrap
  • Rex gray wrap
  • Rex silver wrap
  • Rex red wrap
  • Rex blue wrap
  • Rex green wrap
  • Rex yellow wrap
  • Rex orange wrap
  • Rex purple wrap
  • Rex pink wrap
  • Rex teal wrap
  • Rex brown wrap
  • Rex gold wrap
  • Rex chrome wrap
  • Rex color shift wrap
  • Rex carbon fiber wrap
  • Rex camo and patterned wrap

How much vinyl to wrap a Subaru Rex

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1986–1992hatchback (3 or 5 doors)125.8 in (3,195 mm) to 129.7 in (3,295 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)
1981–1986hatchback (3 or 5 doors)125.8 in (3,195 mm) to 127.4 in (3,235 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)
1972–1981hatchback (3 doors)117.7 in (2,990 mm)about 31 ft (9.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 39 ft (12 m)

Rex wrap cost factors

Rex wrap cost depends on the amount of material and the time to cover its panels. A first generation uses less film, about 31 ft (9.5 m), than the later cars at about 36 ft (11 m). The tailgate glass and the first generation's long doors also affect how many pieces the installer must cut.

  • Film for a full wrap: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Rex wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru Rex, third generation, factory photo
Factory color shown

1986–1992 Rex hatchback (third generation)

1986–1992hatchback (3 or 5 doors)125.8 in (3,195 mm) to 129.7 in (3,295 mm)

The third generation Subaru Rex, built from 1986 to 1992, came as a 3- or 5-door hatchback with a length of 125.8 in (3,195 mm) to 129.7 in (3,295 mm). On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap. Its tailgate includes the rear glass, and the film ends at the edge of that glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Subaru Rex, second generation, factory photo
Factory color shown

1981–1986 Rex hatchback (second generation)

1981–1986hatchback (3 or 5 doors)125.8 in (3,195 mm) to 127.4 in (3,235 mm)

The second generation Subaru Rex, produced from 1981 to 1986, is a 3- or 5-door hatchback measuring 125.8 in (3,195 mm) to 127.4 in (3,235 mm). Its size keeps the film requirement to about 36 ft (11 m) of cast film, with extra for chrome or patterned material. The only wrap-specific point is the tailgate with integrated rear glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Subaru Rex, first generation, factory photo
Factory color shown

1972–1981 Rex hatchback (first generation)

1972–1981hatchback (3 doors)117.7 in (2,990 mm)

The first generation Subaru Rex, sold from 1972 to 1981, is a 3-door hatchback with a length of 117.7 in (2,990 mm). That shorter body means a full wrap takes about 31 ft (9.5 m) of 60-inch (1.52 m) cast film. Two long side doors each need one large piece of film, and the tailgate has the rear glass in it.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 31 ft (9.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 39 ft (12 m).

Roof, hood, chrome delete and PPF on a Rex

A partial wrap on a Subaru Rex can cover the roof, hood, or mirror caps without doing the whole car. A chrome delete turns the window trim and badges black, which suits a small hatchback well. Paint protection film (PPF) can be applied as clear film on the front end only.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Subaru Rex: body, cut-outs and film

The Subaru Rex vinyl wrap follows the car's small hatchback body, offered with 3 or 5 doors depending on generation. The shortest first generation measures 117.7 in (2,990 mm), while the later cars reach 129.7 in (3,295 mm). Every version has a tailgate with the rear glass in it, so the film ends at the edge of the glass.

Rex wrap ideas start with the tailgate, where the film must stop cleanly at the rear glass edge. The hatch glass is fixed, so there is no extra cut-out around a moving window. On the first generation, two long side doors mean each door takes one large piece of film.

How much vinyl to wrap a Rex depends on the generation you own. A first generation takes about 31 ft (9.5 m) of 60-inch (1.52 m) cast film, while the second and third generations take about 36 ft (11 m). Choosing chrome or patterned film adds roughly 33 percent to those figures.

Questions about wrapping a Subaru Rex

How much vinyl does it take to wrap a Subaru Rex?

It takes about 36 ft (11 m) of 60-inch (1.52 m) cast film to wrap the newest Subaru Rex fully, or about 48 ft (14.5 m) with chrome or patterned film.

Can I wrap only the hood or the roof of a Rex?

Yes, you can wrap only the hood or the roof of a Rex as a partial job. Mirror caps are another small area that can be done alone.

Is a Rex hard to wrap?

A Rex is not especially hard to wrap, but the tailgate with the rear glass in it adds a precise cut line. On the first generation, two long side doors make each door one large piece of film.

How many generations of the Rex does this page cover?

This page covers three generations of the Subaru Rex, from 1972 to 1992.