Wraps by car

Subaru SVX wrap

The Subaru SVX wrap page covers the full vinyl wrap for this 1991–1997 mid-size coupe. Subaru built one generation of the SVX, and its only body style is a two-door coupe. A complete wrap of this car takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the total to about 57 ft (17.5 m).

1generations15.5 mof film for a full wrap

Subaru SVX, first generation, factory photo
Subaru SVX, first generation. Factory color shown.

Subaru SVX wrap colors and ideas

  • Subaru SVX black wrap
  • Subaru SVX white wrap
  • Subaru SVX gray wrap
  • Subaru SVX silver wrap
  • Subaru SVX red wrap
  • Subaru SVX blue wrap
  • Subaru SVX green wrap
  • Subaru SVX yellow wrap
  • Subaru SVX orange wrap
  • Subaru SVX purple wrap
  • Subaru SVX pink wrap
  • Subaru SVX teal wrap
  • Subaru SVX brown wrap
  • Subaru SVX gold wrap
  • Subaru SVX chrome wrap
  • Subaru SVX color shift wrap
  • Subaru SVX carbon fiber wrap
  • Subaru SVX camo and patterned wrap

How much vinyl to wrap a Subaru SVX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1991–1997coupe (2 doors)182.1 in (4,625 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Subaru SVX wrap cost factors

Subaru SVX wrap cost depends on the amount of film, and this car's large coupe body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned film job uses roughly 57 ft (17.5 m) of film. The size of the two long doors and the single-piece roof and hood panels also affects the labor time. Removing parts like mirrors and bumpers for a neat finish adds work.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Subaru SVX wraps by generation

Swipe sideways. Tap a card for the full description.

Subaru SVX, first generation, factory photo
Factory color shown

1991–1997 Subaru SVX coupe (first generation)

1991–1997coupe (2 doors)182.1 in (4,625 mm)

The first generation Subaru SVX from 1991–1997 is the only generation this page covers. Paint age matters on a car of these years, because panels may be original or repainted. A test spot of film on the paint comes before a full wrap to check adhesion to the old finish. Any repainted areas need careful cleaning and possibly longer curing before film application.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Subaru SVX

Partial wrap options for the Subaru SVX include the roof, hood, and mirror caps. Chrome delete covers the window trim and badges, replacing bright metal with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done without wrapping the large doors.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Subaru SVX: body, cut-outs and film

The Subaru SVX is a mid-size coupe with two long doors and a length of 182.1 in (4,625 mm), so a Subaru SVX vinyl wrap covers large side panels. Each door is one large piece of film, which means fewer seams on the sides. The coupe roof and hood are also sizeable single panels. This shape reduces the number of separate film pieces compared to a four-door car.

Subaru SVX wrap ideas work best when you account for the long doors and the coupe roofline. The door handles and side mirrors need cut-outs or removal for a clean finish. The front and rear bumpers come off for proper film tucking along the edges. Planning these details before cutting film helps avoid short pieces on the large panels.

To know how much vinyl to wrap a Subaru SVX, note that only one generation exists, from 1991 to 1997. The body dimensions stayed the same across all years of this generation. Therefore, the film estimate of about 51 ft (15.5 m) for standard cast film applies to every SVX. If you choose chrome or patterned film, plan for about 57 ft (17.5 m).

Questions about wrapping a Subaru SVX

How much vinyl does it take to wrap a Subaru SVX?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast vinyl to wrap a Subaru SVX. For chrome or patterned film, the estimate is about 57 ft (17.5 m) of the same width. These figures assume a full wrap of the 1991–1997 coupe body with standard installation waste.

Can I wrap only the hood or the roof of a Subaru SVX?

Yes, you can wrap only the hood or the roof of a Subaru SVX. Partial wrap jobs on this car commonly include the roof, hood, and mirror caps. A chrome delete on the window trim and badges is another popular partial option. These smaller wraps use less film and take less time than a full car wrap.

Is a Subaru SVX hard to wrap?

The Subaru SVX is not especially hard to wrap, but its long doors and large panels add work. Each door is one large piece of film, so you need a helper or careful positioning to avoid wrinkles. The car's length of 182.1 in (4,625 mm) means more film per side and more time for smoothing. The coupe's curved glass and trim also require precise cuts around the windows.

How many generations of the Subaru SVX does this page cover?

This page covers one generation of the Subaru SVX. Subaru built the SVX from 1991 to 1997, and that entire run is the first generation. There are no other generations of this model.