Wraps by car

Toyota Alphard wrap

This page covers the Toyota Alphard wrap for three generations of the minivan. A full wrap of the newest third-generation body takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast vinyl film. Using chrome or patterned film raises the amount to about 84 ft (25.5 m). The guide includes body details, film cuts, and answers common questions.

3generations22.5 mof film for a full wrap

Toyota Alphard, third generation, factory photo
Toyota Alphard, third generation. Factory color shown.

Toyota Alphard wrap colors and ideas

  • Alphard black wrap
  • Alphard white wrap
  • Alphard gray wrap
  • Alphard silver wrap
  • Alphard red wrap
  • Alphard blue wrap
  • Alphard green wrap
  • Alphard yellow wrap
  • Alphard orange wrap
  • Alphard purple wrap
  • Alphard pink wrap
  • Alphard teal wrap
  • Alphard brown wrap
  • Alphard gold wrap
  • Alphard chrome wrap
  • Alphard color shift wrap
  • Alphard carbon fiber wrap
  • Alphard camo and patterned wrap

How much vinyl to wrap a Toyota Alphard

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowvan (5 doors)193.5 in (4,915 mm) to 194.7 in (4,945 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m)
2008–2015van (5 doors)191.9 in (4,875 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m)
2002–2008van (5 doors)191.5 in (4,865 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m)

Alphard wrap cost factors

Alphard wrap cost depends on the size of the van, the film chosen, and the shop's labor. The body is about 193.5 in (4,915 mm) to 194.7 in (4,945 mm) long on the current model, and a standard wrap takes about 74 ft (22.5 m) of cast film. Chrome or patterned film adds material, about 84 ft (25.5 m), and more time for alignment. The height and sliding doors also add labor time for roof access and careful cutting around tracks.

  • Film for a full wrap: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (76.6 in (1,945 mm)): the roof is wrapped from a platform.
  • Restyled in 2017: bumpers and lights differ between the versions, and so do the film cuts.

Alphard wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Alphard, third generation, factory photo
Factory color shown

2015–now Alphard van (third generation)

2015–nowvan (5 doors)193.5 in (4,915 mm) to 194.7 in (4,945 mm)

The third-generation Toyota Alphard from 2015 to now has sliding side doors that affect film cutting and coverage. The door tracks stay bare, so the film is cut along them to allow the doors to slide freely. This cut line is a natural boundary for the wrap design on each side of the van. The tracks remain unpainted metal, so no film is applied over them.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Every trim has a sunroof: the roof film is cut around its opening.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (76.6 in (1,945 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).

Toyota Alphard, second generation, factory photo
Factory color shown

2008–2015 Alphard van (second generation)

2008–2015van (5 doors)191.9 in (4,875 mm)

The second-generation Toyota Alphard from 2008 to 2015 has a tall body that makes roof wrapping more involved. The body height is 75.0 in (1,905 mm), so the roof is wrapped from a platform rather than from the ground. This extra setup takes more time during a full wrap. The roof also has seams and a possible sunroof opening on some trims that require cut-outs.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (75.0 in (1,905 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).

Toyota Alphard, first generation, factory photo
Factory color shown

2002–2008 Alphard van (first generation)

2002–2008van (5 doors)191.5 in (4,865 mm)

The first-generation Toyota Alphard from 2002 to 2008 is often wrapped on cars with older paint that may need extra preparation. Panels on a car of these years may be original or repainted, and a test spot comes before a full wrap. A small test area is checked to see how the film adheres and how the paint behaves during removal. This step helps avoid paint damage on aged surfaces.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (76.2 in (1,935 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).

Roof, hood, chrome delete and PPF on an Alphard

Partial wrap jobs on the Alphard cover selected panels or details rather than the whole van. The roof, hood, and mirror caps can be wrapped individually to change the look or protect paint. Alphard chrome delete covers the window trim and badges with black film for a different appearance. Paint protection film (PPF) is applied as clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Toyota Alphard: body, cut-outs and film

A Toyota Alphard vinyl wrap is planned around its single van body style with five doors. The third generation measures 193.5 in (4,915 mm) to 194.7 in (4,945 mm) long, while the first and second are 191.5 in (4,865 mm) and 191.9 in (4,875 mm). The tall body, 76.6 in (1,945 mm) on the latest model, means the roof is wrapped from a platform. Sliding side doors require the door tracks to stay bare and the film to be cut along them.

Alphard wrap ideas account for the parts that need cut-outs or come off the body. Every trim has parking sensors in the bumpers, so the film is cut around each sensor. Every trim also has fog lamps in the front bumper, which require cut-outs in the bumper film. Some trims have cameras in the body, and the film is cut around each lens. The sunroof opening, present on every third-generation trim, is cut around when the roof is wrapped.

Knowing how much vinyl to wrap an Alphard depends on the generation and the film type. All three generations take about 74 ft (22.5 m) of 60-inch (1.52 m) cast film for a standard color change wrap. Chrome or patterned film requires about 84 ft (25.5 m) because of the extra material needed for alignment. The third generation was restyled in 2017, which changed some panel shapes slightly but not the overall film estimate.

Questions about wrapping a Toyota Alphard

How much vinyl does it take to wrap a Toyota Alphard?

It takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast vinyl film to wrap a Toyota Alphard of the newest generation. For chrome or patterned film, plan for about 84 ft (25.5 m) because that material needs more careful alignment. These figures are for a full exterior wrap on the third-generation van body.

Are the sliding doors of an Alphard wrapped?

No, the sliding doors of an Alphard are wrapped except for the tracks themselves. The door tracks stay bare, and the film is cut along them so the doors can slide without rubbing. The rest of the door panel is wrapped like any other body surface.

Can the roof of an Alphard be wrapped?

Yes, the roof of an Alphard can be wrapped, but it is a tall vehicle. On the third generation the body is 76.6 in (1,945 mm) tall, so installers work from a platform to reach the roof. Any sunroof opening is cut around, and the film is trimmed at the edges.

Which years of the Alphard take the same film cuts?

The third-generation Alphard from 2015 to now shares the same film cuts within its years, but note the 2017 restyle. That restyle updated some body panels but did not change the overall cut patterns for the wrap. The first generation ran 2002–2008 and was restyled in 2005, so early and late first-generation cars may have slightly different bumper shapes. The second generation had no restyle during 2008–2015.