Wraps by car

Toyota Altezza wrap

The Toyota Altezza wrap page covers the first generation sedan and wagon built from 1998 to 2005. A full vinyl wrap on this mid-size car needs about 49 ft (15 m) of 60-inch (1.52 m) cast film for the sedan. The wagon body takes a little more film because of its longer roof and tailgate. This page explains the materials, the tricky areas, and what a wrap job involves.

1generations16.5 mof film for a full wrap

Toyota Altezza, first generation, factory photo
Toyota Altezza, first generation. Factory color shown.

Toyota Altezza wrap colors and ideas

  • Altezza black wrap
  • Altezza white wrap
  • Altezza gray wrap
  • Altezza silver wrap
  • Altezza red wrap
  • Altezza blue wrap
  • Altezza green wrap
  • Altezza yellow wrap
  • Altezza orange wrap
  • Altezza purple wrap
  • Altezza pink wrap
  • Altezza teal wrap
  • Altezza brown wrap
  • Altezza gold wrap
  • Altezza chrome wrap
  • Altezza color shift wrap
  • Altezza carbon fiber wrap
  • Altezza camo and patterned wrap

How much vinyl to wrap a Toyota Altezza

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2005sedan, wagon (4 or 5 doors)173.2 in (4,400 mm) to 177.4 in (4,505 mm)about 49 ft (15 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

Altezza wrap cost factors

The Altezza wrap cost depends on the body style and the film you pick. The wagon has more surface area than the sedan, so it needs about 5 ft (1.5 m) more film. A patterned or chrome film can push the total up to about 69 ft (21 m) because of waste in matching. Labor time is also higher on the wagon tailgate and roof.

  • Film for a full wrap: about 49 ft (15 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Altezza wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Altezza, first generation, factory photo
Factory color shown

1998–2005 Altezza sedan, wagon (first generation)

1998–2005sedan, wagon (4 or 5 doors)173.2 in (4,400 mm) to 177.4 in (4,505 mm)

The first generation Toyota Altezza was offered as a sedan and a wagon from 1998 to 2005. The sedan is the shorter body at 173.2 in (4,400 mm), and the wagon is 177.4 in (4,505 mm) long. The panel plan is different for each style, and the wagon uses about 54 ft (16.5 m) of film against 49 ft (15 m) for the sedan. No other generation of the Altezza is covered in this catalog.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the sedan to 54 ft (16.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an Altezza

A partial wrap on an Altezza can cover the roof, hood, or mirror caps without wrapping the whole car. An Altezza chrome delete covers the bright window trim and badges with black film for a cleaner look. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less film and take less time than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Altezza: body, cut-outs and film

The Toyota Altezza vinyl wrap is planned around two body styles: a four-door sedan and a wagon with four or five doors. The sedan is 173.2 in (4,400 mm) long, while the wagon reaches 177.4 in (4,505 mm). The extra length on the wagon and its taller rear section mean more panels to cover. A full wrap uses about 49 ft (15 m) of film on the sedan and 54 ft (16.5 m) on the wagon.

The main Altezza wrap ideas start with the tailgate on the wagon, which has the rear glass built into it. The film ends at the edge of the glass, so the tailgate needs careful trimming and a clean edge. On the sedan the trunk is a simpler flat panel. Door handles, mirrors, and badges are removed or cut out for a neat finish.

How much vinyl to wrap an Altezza depends on which body style you have and the film you choose. The first generation ran from 1998 to 2005 with the same XE10 platform, so panel sizes do not change between years. A standard color change on the sedan takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. The wagon needs about 54 ft (16.5 m) of the same film.

Questions about wrapping a Toyota Altezza

How much vinyl does it take to wrap a Toyota Altezza?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap a Toyota Altezza sedan. For the wagon, the figure is about 54 ft (16.5 m) of the same film. If you choose a chrome or patterned film, you may need up to about 69 ft (21 m). These numbers come from the first generation body dimensions.

Which Altezza body takes more film?

The wagon takes more film than the sedan on an Altezza. The wagon needs about 54 ft (16.5 m), while the sedan needs about 49 ft (15 m). The difference comes from the wagon's longer body and taller tailgate. Both use 60-inch (1.52 m) cast film.

Can I wrap only the hood or the roof of an Altezza?

Yes, you can wrap only the hood or the roof of an Altezza. A partial wrap on this car often covers the roof, hood, or mirror caps. These jobs use less film than a full wrap and can be done on their own. Chrome delete on the window trim and badges is another smaller option.

Is an Altezza hard to wrap?

An Altezza is not especially hard to wrap, but the wagon tailgate adds work. The rear glass is set into the tailgate, so the film must end at the edge of the glass. The sedan is simpler, but the mid-size body still has long roof and hood panels. With careful trimming and the right film, a clean result is possible.