Wraps by car

Toyota bB wrap

The Toyota bB wrap page covers the first and second generations of this boxy minivan. A full wrap of the newest bB body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast vinyl wrap. Chrome or patterned film raises the estimate to about 66 ft (20 m). The bB is known for its upright shape and tall roof, which are straightforward to wrap.

2generations17.5 mof film for a full wrap

Toyota bB, second generation, factory photo
Toyota bB, second generation. Factory color shown.

Toyota bB wrap colors and ideas

  • bB black wrap
  • bB white wrap
  • bB gray wrap
  • bB silver wrap
  • bB red wrap
  • bB blue wrap
  • bB green wrap
  • bB yellow wrap
  • bB orange wrap
  • bB purple wrap
  • bB pink wrap
  • bB teal wrap
  • bB brown wrap
  • bB gold wrap
  • bB chrome wrap
  • bB color shift wrap
  • bB carbon fiber wrap
  • bB camo and patterned wrap

How much vinyl to wrap a Toyota bB

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2016van (5 doors)149.0 in (3,785 mm) to 149.4 in (3,795 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2000–2005pickup, van (3 or 5 doors)151.4 in (3,845 mm) to 155.3 in (3,945 mm)about 52 ft (16 m) for the pickup to 57 ft (17.5 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

bB wrap cost factors

The bB wrap cost depends on the film area, the film type, and the work on doors and trim. A full wrap uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film on the second generation. Sliding door tracks add cutting time, and the first generation pickup has two separate bodies to wrap. The condition of old paint also affects the preparation work.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Restyled in 2008: bumpers and lights differ between the versions, and so do the film cuts.

bB wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota bB, second generation, factory photo
Factory color shown

2005–2016 bB van (second generation)

2005–2016van (5 doors)149.0 in (3,785 mm) to 149.4 in (3,795 mm)

The second generation Toyota bB, built from 2005 to 2016, has sliding side doors on every body. The tracks stay bare and decide where the film is cut, so the installer trims along the track edge. This generation was restyled in 2008, but the door design did not change. A wrap on this body covers the doors fully while leaving the tracks in their original color.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Toyota bB, first generation, factory photo
Factory color shown

2000–2005 bB pickup, van (first generation)

2000–2005pickup, van (3 or 5 doors)151.4 in (3,845 mm) to 155.3 in (3,945 mm)

The first generation Toyota bB, built from 2000 to 2005, needs a paint check before wrapping. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. Films bond differently to old or refinished paint, so a small adhesion test on each panel is wise. This generation was restyled in 2003, so not all panels are the same age.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 52 ft (16 m) for the pickup to 57 ft (17.5 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a bB

A partial wrap on a Toyota bB can cover the roof, the hood, or the mirror caps. A bB chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less material and can be done without wrapping the sliding doors.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota bB: body, cut-outs and film

The Toyota bB vinyl wrap is shaped by the van body and its compact length of 149.0 in (3,785 mm) to 149.4 in (3,795 mm) in the second generation. The tall, flat sides and large roof panels take wide film without many deep recesses. The five-door body has more cut lines than a three-door but still wraps as one continuous shell. The first generation lengths of 151.4 in (3,845 mm) to 155.3 in (3,945 mm) are only slightly longer.

For bB wrap ideas, remember the sliding side doors: the door tracks stay bare, and the film is cut along them. Door handles, mirror caps, badges, and the antenna base are removed or cut out before wrapping. The first generation offered a pickup body, where the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped. The second generation is a van only, so the whole body is one wrap.

How much vinyl to wrap a bB depends mainly on the generation and body style. The first generation ranges from about 52 ft (16 m) for the pickup to 57 ft (17.5 m) for the van. The second generation takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for up to about 66 ft (20 m).

Questions about wrapping a Toyota bB

How much vinyl does it take to wrap a Toyota bB?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full wrap of the newest Toyota bB body. If the film is chrome or patterned, plan for about 66 ft (20 m). These figures are for the second generation van, which is the model most often wrapped today.

Are the sliding doors of a bB wrapped?

Yes, the sliding doors of a bB are wrapped. The door tracks stay bare, and the film is cut along them. This keeps the doors working smoothly and gives a clean edge around the track.

Which years of the bB take the same film cuts?

The film cuts are the same within each generation before and after its restyling. The first generation was built from 2000 to 2005 and restyled in 2003, so the cuts are the same for 2000–2003 and for 2003–2005. The second generation was built from 2005 to 2016 and restyled in 2008, so the cuts are the same for 2005–2008 and for 2008–2016.

Can I wrap only the hood or the roof of a bB?

Yes, you can wrap only the hood or the roof of a bB. A partial wrap can cover the roof, hood, or mirror caps. These are common choices for a color contrast without wrapping the whole van.