Wraps by car

Toyota Cavalier wrap

A Toyota Cavalier wrap covers the first-generation Toyota Cavalier, built from 1995 to 2000, with vinyl wrap. This page covers the one generation in the catalog and the film amounts for its coupe and sedan bodies. A full wrap of the newest body takes about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the sedan, using 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Toyota Cavalier, first generation, factory photo
Toyota Cavalier, first generation. Factory color shown.

Toyota Cavalier wrap colors and ideas

  • Cavalier black wrap
  • Cavalier white wrap
  • Cavalier gray wrap
  • Cavalier silver wrap
  • Cavalier red wrap
  • Cavalier blue wrap
  • Cavalier green wrap
  • Cavalier yellow wrap
  • Cavalier orange wrap
  • Cavalier purple wrap
  • Cavalier pink wrap
  • Cavalier teal wrap
  • Cavalier brown wrap
  • Cavalier gold wrap
  • Cavalier chrome wrap
  • Cavalier color shift wrap
  • Cavalier carbon fiber wrap
  • Cavalier camo and patterned wrap

How much vinyl to wrap a Toyota Cavalier

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1995–2000coupe, sedan (2 or 4 doors)180.9 in (4,595 mm) to 181.1 in (4,600 mm)about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

Cavalier wrap cost factors

Cavalier wrap cost depends on the amount of film, the body style, and the labor for the details. The coupe needs about 49 ft (15 m) of 60-inch (1.52 m) cast film, and the sedan needs about 51 ft (15.5 m). Additional time for removing badges or wrapping the deep bumpers also affects the final cost. No price is fixed because shop rates vary.

  • Film for a full wrap: about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).
  • Body: coupe, sedan (2 or 4 doors).

Cavalier wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Cavalier, first generation, factory photo
Factory color shown

1995–2000 Cavalier coupe, sedan (first generation)

1995–2000coupe, sedan (2 or 4 doors)180.9 in (4,595 mm) to 181.1 in (4,600 mm)

The first-generation Toyota Cavalier offers two body styles, a coupe and a sedan. The coupe has two doors and the sedan has four doors, which changes the number of door jambs to wrap. The sedan is slightly longer at 181.1 in (4,600 mm) versus 180.9 in (4,595 mm) for the coupe, so it needs about 2 ft (0.5 m) more film.

Film: about 49 ft (15 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Cavalier

A partial wrap on a Toyota Cavalier can focus on the roof, hood, or mirror caps, which use less film than a full wrap. A chrome delete covers the window trim and badges with black film for a subtle change. Paint protection film (PPF) is a clear film applied to the front end to protect the paint from stone chips without changing the color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Cavalier: body, cut-outs and film

The Toyota Cavalier vinyl wrap amount depends on body style and length. The coupe needs about 49 ft (15 m) of 60-inch (1.52 m) cast film, while the sedan needs about 51 ft (15.5 m). Both body styles are compact, with an overall length from 180.9 in (4,595 mm) to 181.1 in (4,600 mm), so panel sizes remain manageable for a single installer.

Cavalier wrap ideas include planning for the details that need extra work. The door handles, mirrors, and badges should be removed or cut out carefully for a clean finish. The front and rear bumpers have curved sections that require stretching the film, and the side moldings on some trims need trimming around. These parts add time but no extra film when measured correctly.

How much vinyl to wrap a Cavalier stays the same across the single generation. The coupe and sedan share the same body codes and trim levels, so the panel layout does not change between model years. An installer counting film can use the same cut list for any 1995 to 2000 Cavalier, adding a little extra for waste on the longer sedan.

Questions about wrapping a Toyota Cavalier

How much vinyl does it take to wrap a Toyota Cavalier?

A Toyota Cavalier wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for the coupe and 51 ft (15.5 m) for the sedan. This estimate is for a full color change wrap with no extra graphics or patterns. Chrome or patterned film can require up to about 64 ft (19.5 m) due to alignment waste.

Which Cavalier body takes more film?

The sedan body of the Toyota Cavalier takes more film than the coupe. The sedan needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, while the coupe needs about 49 ft (15 m). The extra length of the sedan, 181.1 in (4,600 mm) versus 180.9 in (4,595 mm), accounts for the difference.

Can I wrap only the hood or the roof of a Cavalier?

Yes, you can wrap only the hood or the roof of a Toyota Cavalier as a partial wrap. A roof or hood wrap uses a single large piece of vinyl and is a good way to change the look without a full wrap. Mirror caps can also be wrapped separately, or you can choose a chrome delete on the window trim and badges.

Is a Cavalier hard to wrap?

A Toyota Cavalier is not especially hard to wrap, but the deep bumpers and side moldings add work. The compact size and simple body lines make it a straightforward car for an installer with experience. Removing the badges and handles before wrapping gives the best result and takes extra time.