Wraps by car

Toyota Celsior wrap

The Toyota Celsior wrap page covers the three generations of this full-size luxury sedan, sold from 1989 to 2006. A complete vinyl wrap on the newest XF30 body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, allow about 70 ft (21.5 m) for the same body.

3generations18.5 mof film for a full wrap

Toyota Celsior, third generation, factory photo
Toyota Celsior, third generation. Factory color shown.

Toyota Celsior wrap colors and ideas

  • Celsior black wrap
  • Celsior white wrap
  • Celsior gray wrap
  • Celsior silver wrap
  • Celsior red wrap
  • Celsior blue wrap
  • Celsior green wrap
  • Celsior yellow wrap
  • Celsior orange wrap
  • Celsior purple wrap
  • Celsior pink wrap
  • Celsior teal wrap
  • Celsior brown wrap
  • Celsior gold wrap
  • Celsior chrome wrap
  • Celsior color shift wrap
  • Celsior carbon fiber wrap
  • Celsior camo and patterned wrap

How much vinyl to wrap a Toyota Celsior

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2000–2006sedan (4 doors)196.7 in (4,995 mm) to 197.4 in (5,015 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1994–2000sedan (4 doors)196.7 in (4,995 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
1989–1994sedan (4 doors)196.7 in (4,995 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Celsior wrap cost factors

The cost of a Celsior wrap depends on the film area, the film type, and the amount of chrome trim you cover. A third-generation car needs about 61 ft (18.5 m) of film, while a first- or second-generation car needs about 56 ft (17 m). Cast film costs more than calendered film, and patterned or chrome film adds another 9 to 13 ft (2.7 to 4 m) because the pattern must line up.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (4 doors).
  • Restyled in 2003: bumpers and lights differ between the versions, and so do the film cuts.

Celsior wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Celsior, third generation, factory photo
Factory color shown

2000–2006 Celsior sedan (third generation)

2000–2006sedan (4 doors)196.7 in (4,995 mm) to 197.4 in (5,015 mm)

The third-generation Celsior, the XF30 from 2000 to 2006, was restyled in 2003, and the bumpers and lights changed. Film cut for one version does not fit the other, so you must order a kit for the exact front and rear of the car. The side of the body is the same before and after the update.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Toyota Celsior, second generation, factory photo
Factory color shown

1994–2000 Celsior sedan (second generation)

1994–2000sedan (4 doors)196.7 in (4,995 mm)

The second-generation Celsior, the XF20 from 1994 to 2000, can have original paint or a respray after all these years. A wrap sticks well to clean original paint, but a repainted panel may not be smooth enough, so a test spot comes before a full wrap. The installer checks the roof and the hood first, because these panels fade the most.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Toyota Celsior, first generation, factory photo
Factory color shown

1989–1994 Celsior sedan (first generation)

1989–1994sedan (4 doors)196.7 in (4,995 mm)

The first-generation Celsior, the XF10 from 1989 to 1994, is the oldest body but the same size as the second generation. A full wrap takes about 56 ft (17 m) of cast film, and the four-door sedan body has the same number of panels as the later cars. The flat sides and the simple bumpers make this body a good car to learn wrapping on.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Celsior

The Celsior chrome delete covers the window trim and the badges with black film, and it is a smaller job than a full color change. A partial wrap can be just the roof and the hood, or the mirror caps only, and you can add a rear spoiler wrap. Paint protection film (PPF) on the front end is a clear wrap for the bumper, the hood edge and the mirror caps.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Celsior: body, cut-outs and film

Every generation of the Toyota Celsior is a four-door sedan, so the vinyl wrap work follows the same body style in all model years. The XF30 body from 2000 to 2006 measures 196.7 in (4,995 mm) to 197.4 in (5,015 mm), while both earlier generations are 196.7 in (4,995 mm) long. A length difference of less than an inch does not change the amount of film, but the newer bumpers can add a little work when you cut the panels.

Celsior wrap ideas start with the bright trim around the windows, because a luxury sedan has more chrome than a base model. The door handles and the grille surround are also chrome, and these pieces usually come off for a clean wrap. The mirror caps and the antenna can be wrapped in place, and the badges need cut-outs if they stay on the car.

To work out how much vinyl to wrap a Celsior, check which generation the car is, because the film estimates differ between the XF30 and the earlier bodies. An XF20 or XF10 takes about 56 ft (17 m) of cast film, while an XF30 takes about 61 ft (18.5 m). The extra length comes mainly from the larger bumpers and the rear panel of the newest body.

Questions about wrapping a Toyota Celsior

How much vinyl does it take to wrap a Toyota Celsior?

A Toyota Celsior takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full wrap on the third-generation body from 2000 to 2006. The earlier XF20 and XF10 bodies take about 56 ft (17 m) of the same film. If you use chrome or patterned film, add about 9 to 13 ft (2.7 to 4 m) for pattern matching.

Which years of the Celsior take the same film cuts?

The XF10 sold from 1989 to 1994 shares its film cuts with the XF20 sold from 1994 to 2000, except for the bumper changes from the 1992 and 1997 restylings. The XF30 from 2000 to 2006 has different panels, and its own 2003 restyle changed the front and rear bumpers. Within one body style, the cuts are the same between restyling years.

Can I wrap only the hood or the roof of a Celsior?

Yes, you can wrap only the hood or the roof of a Celsior, because a partial wrap uses the same film as a full wrap. The roof and the hood are the most common partial wrap panels on this car, and the mirror caps can be added for a matching set. Chrome delete on the window trim and badges is another partial job that needs less film.

Is a Celsior hard to wrap?

A Celsior is not the hardest car to wrap, but the luxury trim and the size of the panels add work. The window trim and the grille are chrome, and these pieces must come off or be masked carefully. The long roof and the large doors need two people to lay the film without wrinkles.