Wraps by car

Toyota Chaser wrap

The Toyota Chaser wrap page covers six generations of this full-size sedan, from 1980 to 2001, and a full vinyl wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Each generation is listed with its production years, body style, and film estimate. Use the guide to plan material for a color change or paint protection film.

6generations16 mof film for a full wrap

Toyota Chaser, sixth generation, factory photo
Toyota Chaser, sixth generation. Factory color shown.

Toyota Chaser wrap colors and ideas

  • Chaser black wrap
  • Chaser white wrap
  • Chaser gray wrap
  • Chaser silver wrap
  • Chaser red wrap
  • Chaser blue wrap
  • Chaser green wrap
  • Chaser yellow wrap
  • Chaser orange wrap
  • Chaser purple wrap
  • Chaser pink wrap
  • Chaser teal wrap
  • Chaser brown wrap
  • Chaser gold wrap
  • Chaser chrome wrap
  • Chaser color shift wrap
  • Chaser carbon fiber wrap
  • Chaser camo and patterned wrap

How much vinyl to wrap a Toyota Chaser

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2001sedan (4 doors)185.6 in (4,715 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1992–1996sedan (4 doors)187.0 in (4,750 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
1988–1992sedan (4 doors)184.6 in (4,690 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1984–1988sedan (4 doors)184.6 in (4,690 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1980–1984sedan (4 doors)182.7 in (4,640 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1977–1980coupe, sedan (2 or 4 doors)182.7 in (4,640 mm)about 48 ft (14.5 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

Chaser wrap cost factors

Chaser wrap cost is driven by the amount of film, the condition of the paint, and how many parts are removed. A full wrap of the X100 needs about 52 ft (16 m) of cast film, while the X90 needs about 46 ft (14 m), so the generation changes the material bill. Paint correction before wrapping adds labor on a car of this age, and chrome delete or badge removal increases the hours.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).
  • Restyled in 1998: bumpers and lights differ between the versions, and so do the film cuts.

Chaser wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Chaser, sixth generation, factory photo
Factory color shown

1996–2001 Chaser sedan (sixth generation)

1996–2001sedan (4 doors)185.6 in (4,715 mm)

The sixth-generation Toyota Chaser from 1996 to 2001 was restyled in 1998, and the bumpers and lights changed enough that film cut for one version does not fit the other. A pre-1998 front bumper has different fog light openings and a longer lower lip, so a template from a later car will leave gaps. When you order a kit, confirm the production date of the car and not just the body code X100.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Toyota Chaser, fifth generation, factory photo
Factory color shown

1992–1996 Chaser sedan (fifth generation)

1992–1996sedan (4 doors)187.0 in (4,750 mm)

The fifth-generation Toyota Chaser from 1992 to 1996 is old enough that panels may be original or repainted, and a test spot comes before a full wrap. Aged clear coat can lift when the film is repositioned, so test adhesion on the hood or door before you commit. If the paint is original and faded, wet sanding and polishing before the wrap will help the film lay flat.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Toyota Chaser, fourth generation, factory photo
Factory color shown

1988–1992 Chaser sedan (fourth generation)

1988–1992sedan (4 doors)184.6 in (4,690 mm)

The fourth-generation Toyota Chaser from 1988 to 1992 is a full-size sedan with a length of 184.6 in (4,690 mm), which puts it in the middle of the range for film use. A full wrap takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, and the four-door body gives you two large door panels per side. The roofline is long and straight, so you can use a single piece for the roof without seams.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Toyota Chaser, third generation, factory photo
Factory color shown

1984–1988 Chaser sedan (third generation)

1984–1988sedan (4 doors)184.6 in (4,690 mm)

The third-generation Toyota Chaser from 1984 to 1988 shares its 184.6 in (4,690 mm) length with the fourth generation, so a full wrap also takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The sedan body has deep front and rear bumpers that need more material and relief cuts at the corners. The trunk lid is almost flat, which makes it one of the easier panels to wrap on this car.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Toyota Chaser, second generation, factory photo
Factory color shown

1980–1984 Chaser sedan (second generation)

1980–1984sedan (4 doors)182.7 in (4,640 mm)

The second-generation Toyota Chaser from 1980 to 1984 is the shortest of the six at 182.7 in (4,640 mm), but it still needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap. The boxy shape means the doors and quarter panels have few compound curves, so the film lays down with less stretching. The biggest challenge on this generation is the chrome bumper trim, which is often pitted and should be removed or covered with a chrome delete film first.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Toyota Chaser, first generation, factory photo
Factory color shown

1977–1980 Chaser coupe, sedan (first generation)

1977–1980coupe, sedan (2 or 4 doors)182.7 in (4,640 mm)

Film: about 48 ft (14.5 m) for the coupe to 51 ft (15.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Chaser

A partial wrap on a Toyota Chaser can cover the roof, hood, and mirror caps for a two-tone look without a full color change. Chaser chrome delete replaces the bright window trim and badges with black film, and it is a low-material job that changes the side profile. Paint protection film on the front end uses clear urethane film to guard the hood, fenders, and bumper from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Chaser: body, cut-outs and film

A Toyota Chaser vinyl wrap is laid out on a four-door sedan with a length between 182.7 in (4,640 mm) and 187.0 in (4,750 mm), so every panel is large and flat enough for a clean install. The roof, hood, and trunk lid are the biggest single pieces and need careful squeegee work to avoid stretch marks. All generations have framed doors, which makes the door handles and mirror bases the main cut-out points.

Chaser wrap ideas for this car start with the chrome window trim and door badges, which are best removed or masked before the film goes on. The front and rear bumpers need relief cuts around fog light openings and license plate recesses. Door handles, side mirrors, and the antenna should be taken off for a seamless look, and the fuel filler door is wrapped separately.

How much vinyl to wrap a Chaser depends on the generation, because the body length changes by up to 4.3 in (110 mm) between the newest and oldest cars. The X100 from 1996 to 2001 uses about 52 ft (16 m) of 60-inch (1.52 m) cast film, while the X90 from 1992 to 1996 uses about 46 ft (14 m). Chrome or patterned film adds about 12 to 13 ft (3.5 to 4 m) to every estimate due to pattern matching.

Questions about wrapping a Toyota Chaser

How much vinyl does it take to wrap a Toyota Chaser?

Yes, a full wrap of a Toyota Chaser takes about 52 ft (16 m) of 60-inch (1.52 m) cast film for the newest body from 1996 to 2001. If you choose a chrome or patterned film, plan for about 64 ft (19.5 m) because the pattern has to be matched at the seams. The X90 from 1992 to 1996 uses slightly less, about 46 ft (14 m) of cast film.

Which years of the Chaser take the same film cuts?

The same film cuts work for 1988–1992 and 1984–1988 Toyota Chasers, because both generations share a length of 184.6 in (4,690 mm) and the same sedan body. The 1996–2001 Chaser is different before and after the 1998 restyling, because the bumpers and lights changed. The 1992–1996 Chaser and the 1980–1984 Chaser each have their own dimensions, so cuts do not transfer to those generations.

Can I wrap only the hood or the roof of a Chaser?

Yes, you can wrap only the hood or the roof of a Toyota Chaser, and a partial wrap is a good way to add a gloss black roof or a contrasting hood. Mirror caps are another small job that changes the look with very little film. Paint protection film on the front end is also a partial option that covers the hood, fenders, and bumper with a clear film.

Is a Chaser hard to wrap?

A Toyota Chaser is not hard to wrap because it is a full-size sedan with large panel surfaces and a low roofline. The work comes from the size: a length of up to 187.0 in (4,750 mm) means long pieces of film that need two people to handle straight. The X90 from 1992 to 1996 uses about 46 ft (14 m) of film, so the amount of material is below the class average, but the door jambs and bumper recesses still add time.