Wraps by car

Toyota Cressida wrap

A Toyota Cressida wrap uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast vinyl film for the newest body. This page covers four generations of the full-size sedan and wagon. The estimates here help you plan a vinyl wrap on any Cressida from 1977 to 1992.

4generations15.5 mof film for a full wrap

Toyota Cressida, fourth generation, factory photo
Toyota Cressida, fourth generation. Factory color shown.

Toyota Cressida wrap colors and ideas

  • Cressida black wrap
  • Cressida white wrap
  • Cressida gray wrap
  • Cressida silver wrap
  • Cressida red wrap
  • Cressida blue wrap
  • Cressida green wrap
  • Cressida yellow wrap
  • Cressida orange wrap
  • Cressida purple wrap
  • Cressida pink wrap
  • Cressida teal wrap
  • Cressida brown wrap
  • Cressida gold wrap
  • Cressida chrome wrap
  • Cressida color shift wrap
  • Cressida carbon fiber wrap
  • Cressida camo and patterned wrap

How much vinyl to wrap a Toyota Cressida

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1988–1992sedan (4 doors)184.6 in (4,690 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1984–1988sedan, wagon (4 or 5 doors)184.6 in (4,690 mm)about 56 ft (17 m) for the wagon to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)
1980–1985sedan, wagon (4 or 5 doors)177.2 in (4,500 mm) to 184.3 in (4,680 mm)about 51 ft (15.5 m) for the sedan to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)
1977–1981sedan, wagon (4 or 5 doors)178.1 in (4,524 mm) to 178.3 in (4,529 mm)about 54 ft (16.5 m) for the wagon to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

Cressida wrap cost factors

Cressida wrap cost is set by the film amount, which ranges from 51 ft (15.5 m) to 57 ft (17.5 m) for a full wrap. The size of the car, the body style and the condition of the paint also change the labor time. Removing trim, wrapping the tailgate and handling old paint add steps that affect the final cost.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Cressida wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Cressida, fourth generation, factory photo
Factory color shown

1988–1992 Cressida sedan (fourth generation)

1988–1992sedan (4 doors)184.6 in (4,690 mm)

The fourth generation Toyota Cressida was built from 1988 to 1992 as a four-door sedan. Its length of 184.6 in (4,690 mm) makes it one of the larger bodies in this catalog. Paint age matters on this generation: some panels may be original, while others could be repainted, and a test spot for film adhesion comes before a full wrap.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Toyota Cressida, third generation, factory photo
Factory color shown

1984–1988 Cressida sedan, wagon (third generation)

1984–1988sedan, wagon (4 or 5 doors)184.6 in (4,690 mm)

The third generation Toyota Cressida, made from 1984 to 1988, came as a sedan or a wagon. The wagon needs about 56 ft (17 m) of 60-inch cast film, and the sedan needs about 57 ft (17.5 m). The body style decides the panel plan: the wagon has a tailgate with rear glass, so the film stops at the glass edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) for the wagon to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Toyota Cressida, second generation, factory photo
Factory color shown

1980–1985 Cressida sedan, wagon (second generation)

1980–1985sedan, wagon (4 or 5 doors)177.2 in (4,500 mm) to 184.3 in (4,680 mm)

The second generation Toyota Cressida was produced from 1980 to 1985 and overlaps with the third generation from 1984 to 1985. An owner with a car from those two years should check which body it is, because the film amounts differ. This generation ranges from 177.2 in (4,500 mm) to 184.3 in (4,680 mm) and includes sedan and wagon styles.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the sedan to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Toyota Cressida, first generation, factory photo
Factory color shown

1977–1981 Cressida sedan, wagon (first generation)

1977–1981sedan, wagon (4 or 5 doors)178.1 in (4,524 mm) to 178.3 in (4,529 mm)

The first generation Toyota Cressida was built from 1977 to 1981 as a sedan or wagon. Its length of 178.1 in (4,524 mm) to 178.3 in (4,529 mm) is shorter than later bodies, but the wagon still takes about 54 ft (16.5 m) of film. The sedan takes about 56 ft (17 m), and a chrome or patterned wrap can use up to 64 ft (19.5 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) for the wagon to 56 ft (17 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Cressida

Partial wraps on a Cressida can cover the roof, hood or mirror caps without wrapping the whole car. Cressida chrome delete changes the window trim and badges to black film for a different look. Paint protection film on the front end uses clear film to guard the hood, fenders and bumper.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Cressida: body, cut-outs and film

A Toyota Cressida vinyl wrap is shaped by the sedan and wagon bodies, which are 177.2 to 184.6 inches long. The full-size body has tall sides and a long roof, so a full wrap takes more film than a compact car. The wagon adds a large tailgate and rear side windows, which changes how the film is cut.

Cressida wrap ideas often start with the tailgate, where the rear glass sits inside the panel. The film ends at the edge of that glass, so the installer trims around it and does not wrap the glass itself. Door handles, mirrors and badges also need cut-outs or removal for a clean finish.

How much vinyl to wrap a Cressida depends on the generation and body style. The newest body, from 1988 to 1992, needs about 51 ft (15.5 m) of 60-inch cast film for a full wrap. Earlier sedans and wagons range from 51 ft (15.5 m) to 57 ft (17.5 m), while chrome or patterned film can require up to 70 ft (21.5 m).

Questions about wrapping a Toyota Cressida

How much vinyl does it take to wrap a Toyota Cressida?

About 51 ft (15.5 m) of 60-inch (1.52 m) cast vinyl film is needed to wrap a Toyota Cressida of the newest body, from 1988 to 1992. Earlier generations take from 51 ft (15.5 m) up to 57 ft (17.5 m), depending on the body style. Chrome or patterned film can require up to 70 ft (21.5 m) on some models.

Can I wrap only the hood or the roof of a Cressida?

Yes, you can wrap only the hood or the roof of a Cressida. A partial wrap often covers the roof, hood or mirror caps, and the job can also include chrome delete on window trim and badges. Paint protection film is another partial option for the front end.

Is a Cressida hard to wrap?

A Cressida is not unusually hard to wrap, but the tailgate adds work on wagons because the rear glass sits inside the panel. The film has to be trimmed to the edge of the glass, which takes care and time. The car's full-size body also means more film and longer panels than a smaller car.

How many generations of the Cressida does this page cover?

This page covers four generations of the Toyota Cressida. They are the first generation from 1977 to 1981, the second from 1980 to 1985, the third from 1984 to 1988, and the fourth from 1988 to 1992.