Wraps by car

Toyota Crown Majesta wrap

The Toyota Crown Majesta wrap page covers all six generations of this luxury sedan and the vinyl wrap a full body takes. A complete color change on the newest sixth-generation body needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The Crown Majesta is a four-door sedan in every generation, which keeps the panel count and the film estimate steady across the catalog. Plan the same amount for chrome or patterned film, which runs to about 70 ft (21.5 m) on the 2013–2018 S210 body.

6generations18.5 mof film for a full wrap

Toyota Crown Majesta, sixth generation, factory photo
Toyota Crown Majesta, sixth generation. Factory color shown.

Toyota Crown Majesta wrap colors and ideas

  • Crown Majesta black wrap
  • Crown Majesta white wrap
  • Crown Majesta gray wrap
  • Crown Majesta silver wrap
  • Crown Majesta red wrap
  • Crown Majesta blue wrap
  • Crown Majesta green wrap
  • Crown Majesta yellow wrap
  • Crown Majesta orange wrap
  • Crown Majesta purple wrap
  • Crown Majesta pink wrap
  • Crown Majesta teal wrap
  • Crown Majesta brown wrap
  • Crown Majesta gold wrap
  • Crown Majesta chrome wrap
  • Crown Majesta color shift wrap
  • Crown Majesta carbon fiber wrap
  • Crown Majesta camo and patterned wrap

How much vinyl to wrap a Toyota Crown Majesta

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2018sedan (4 doors)195.7 in (4,970 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
2009–2013sedan (4 doors)196.7 in (4,995 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
2004–2009sedan (4 doors)195.9 in (4,975 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1999–2004sedan (4 doors)192.9 in (4,900 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
1995–1999sedan (4 doors)192.9 in (4,900 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1991–1995sedan (4 doors)192.9 in (4,900 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Crown Majesta wrap cost factors

A Crown Majesta wrap cost is set by the amount of film, the number of panels and the condition of the paint on this luxury sedan. The newest sixth-generation body calls for about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, and a full wrap covers the roof, hood, trunk, four doors, fenders and both bumpers. Removing and reinstalling the mirrors, door handles, grille and badges adds labor, and a car of the 2013–2018 generation may have paint chips that need correction before the vinyl goes on. A chrome delete or a roof-only job uses less film but still requires careful trimming around the window moldings and badges.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (4 doors).

Crown Majesta wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Crown Majesta, sixth generation, factory photo
Factory color shown

2013–2018 Crown Majesta sedan (sixth generation)

2013–2018sedan (4 doors)195.7 in (4,970 mm)

The sixth-generation Toyota Crown Majesta is a four-door luxury sedan that measures 195.7 in (4,970 mm) long. That length puts a long roof and large rear doors on the car, so the vinyl wrap estimate is about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. A full wrap includes the front and rear bumpers, hood, trunk, roof and all four doors, plus the rocker panels. Chrome or patterned film on this S210 body runs to about 70 ft (21.5 m) because the pattern must be matched across the long panels.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Toyota Crown Majesta, fifth generation, factory photo
Factory color shown

2009–2013 Crown Majesta sedan (fifth generation)

2009–2013sedan (4 doors)196.7 in (4,995 mm)

The fifth-generation Toyota Crown Majesta spans 2009–2013, and many panels on this S200 may be original paint or a respray. Before a full wrap, a test spot on each panel tells whether the old paint can hold the film adhesive without lifting. The body is 196.7 in (4,995 mm) long, so the wrap takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, and chrome or patterned film about 70 ft (21.5 m). On a car of these years the hood and roof often show stone chips, which should be filled and sanded before the vinyl goes down.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Toyota Crown Majesta, fourth generation, factory photo
Factory color shown

2004–2009 Crown Majesta sedan (fourth generation)

2004–2009sedan (4 doors)195.9 in (4,975 mm)

The fourth-generation Toyota Crown Majesta is a four-door sedan that is 195.9 in (4,975 mm) long. The wrap takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, and a chrome or patterned wrap takes about 70 ft (21.5 m) for this S180 body. The four doors, trunk lid, hood and roof are the main panels, and the rockers and bumpers add the rest of the surface area. This generation has large flat sides, which means fewer relief cuts are needed behind the rear wheels.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Toyota Crown Majesta, third generation, factory photo
Factory color shown

1999–2004 Crown Majesta sedan (third generation)

1999–2004sedan (4 doors)192.9 in (4,900 mm)

The third-generation Toyota Crown Majesta measures 192.9 in (4,900 mm), so a full vinyl wrap needs about 59 ft (18 m) of 60-inch (1.52 m) cast film. The S170 is still a four-door luxury sedan, and the wrap covers the hood, trunk, roof, all four doors, fenders and both bumpers. Chrome or patterned film on this body runs to about 69 ft (21 m) because the pattern has to line up on the long side panels. The shorter front and rear overhangs make the bumper wrap slightly easier than on the fifth-generation car.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Toyota Crown Majesta, second generation, factory photo
Factory color shown

1995–1999 Crown Majesta sedan (second generation)

1995–1999sedan (4 doors)192.9 in (4,900 mm)

The second-generation Toyota Crown Majesta is 192.9 in (4,900 mm) long, and a full wrap takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The S150 body is a four-door sedan, so the panel list is the same as the later cars, but the roof and hood are slightly smaller. Chrome or patterned film for this generation runs to about 67 ft (20.5 m). The doors and fenders have a flatter shape, which makes the vinyl lay down with less stretching than on the newer bodies.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Toyota Crown Majesta, first generation, factory photo
Factory color shown

1991–1995 Crown Majesta sedan (first generation)

1991–1995sedan (4 doors)192.9 in (4,900 mm)

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Crown Majesta

A partial wrap on a Crown Majesta often covers the roof, hood and mirror caps in one color while the rest of the car stays original. A Crown Majesta chrome delete uses black film on the window trim and badges, and it is a smaller job that still demands precise trimming around the bright moldings. Paint protection film (PPF) is clear film on the front end, and it fits the hood, fenders, mirror caps and front bumper of this luxury sedan. These smaller jobs use less film than a full color change wrap and can be done in sections.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Crown Majesta: body, cut-outs and film

A Toyota Crown Majesta vinyl wrap is a full-size job because the sedan body has long roof and quarter panels plus four doors. The sixth-generation car measures 195.7 in (4,970 mm) overall, so the hood, roof and trunk lid each take a wide sheet of 60-inch (1.52 m) film. Wrapping a luxury sedan means splitting the work into the bumper, fenders, doors, rockers and rear deck to keep the film relaxed. The body has no sharp body lines, but the large flat areas reward a careful installer with clean, low-tension results.

Crown Majesta wrap ideas start with the bright trim, because this luxury sedan carries window moldings, door handles and grille parts that can be covered in black film. The door handles and mirrors come off for a clean wrap, and the front bumper, grille and badges need cut-outs or removal before film is applied. The trunk emblems and the chrome strip above the license plate are wrapped in place or removed for a neater edge. A two-tone layout that leaves the roof black is an option, but the long roofline uses extra film and a second pair of hands.

How much vinyl to wrap a Crown Majesta depends on the generation, since the newest bodies measure 195.7 in (4,970 mm) and the third-generation car is 192.9 in (4,900 mm). The fifth-generation S200 is the longest at 196.7 in (4,995 mm), so its roof and rockers take slightly more film than the S210. The second-generation S150 is shorter and suits about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, while the fourth-generation S180 needs roughly 61 ft (18.5 m). Every body is a four-door sedan, so the number of panels stays similar even when the overall length changes.

Questions about wrapping a Toyota Crown Majesta

How much vinyl does it take to wrap a Toyota Crown Majesta?

It takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film to wrap a Toyota Crown Majesta of the newest sixth generation. A chrome or patterned film wrap on the same S210 body needs about 70 ft (21.5 m). The estimate covers the roof, hood, trunk, four doors, fenders and both bumpers.

Can I wrap only the hood or the roof of a Crown Majesta?

Yes, you can wrap only the hood or the roof of a Crown Majesta. A partial wrap on this sedan often includes the roof, hood and mirror caps, and a chrome delete covers the window trim and badges. Paint protection film (PPF) is another front-end-only option with clear film.

Is a Crown Majesta hard to wrap?

The Crown Majesta is a large luxury sedan, and the long roof and flat sides add work when the film is laid on. The door handles, mirrors, grille and badges need removal or cut-outs, and the bright trim has to be covered carefully for a chrome delete. The body is up to 196.7 in (4,995 mm) long on the fifth generation, so two installers and a clean bay help keep the film straight.

How many generations of the Crown Majesta does this page cover?

This page covers six generations of the Toyota Crown Majesta. They include the second generation (1995–1999), third generation (1999–2004), fourth generation (2004–2009), fifth generation (2009–2013) and sixth generation (2013–2018).