Wraps by car

Toyota FJ Cruiser wrap

This page is a guide to a Toyota FJ Cruiser wrap with vinyl wrap. The FJ Cruiser was produced in one generation from 2006 to 2018. A full wrap of this SUV takes about 62 ft (19 m) of 60-inch (1.52 m) cast film.

1generations19 mof film for a full wrap

Toyota FJ Cruiser, first generation, factory photo
Toyota FJ Cruiser, first generation. Factory color shown.

Toyota FJ Cruiser wrap colors and ideas

  • FJ Cruiser black wrap
  • FJ Cruiser white wrap
  • FJ Cruiser gray wrap
  • FJ Cruiser silver wrap
  • FJ Cruiser red wrap
  • FJ Cruiser blue wrap
  • FJ Cruiser green wrap
  • FJ Cruiser yellow wrap
  • FJ Cruiser orange wrap
  • FJ Cruiser purple wrap
  • FJ Cruiser pink wrap
  • FJ Cruiser teal wrap
  • FJ Cruiser brown wrap
  • FJ Cruiser gold wrap
  • FJ Cruiser chrome wrap
  • FJ Cruiser color shift wrap
  • FJ Cruiser carbon fiber wrap
  • FJ Cruiser camo and patterned wrap

How much vinyl to wrap a Toyota FJ Cruiser

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2018SUV (5 doors)183.9 in (4,671 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

FJ Cruiser wrap cost factors

FJ Cruiser wrap cost depends on the size of the body and the film chosen, not on generation differences because there is only one. The five-door SUV is 183.9 in (4,671 mm) long and 71.3 in (1,811 mm) high, so a full wrap takes about 62 ft (19 m) of film. More detailed films like chrome or patterned material raise the amount to about 79 ft (24 m). The roof height adds install time because it is wrapped from a platform.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (71.3 in (1,811 mm)): the roof is wrapped from a platform.

FJ Cruiser wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota FJ Cruiser, first generation, factory photo
Factory color shown

2006–2018 FJ Cruiser SUV (first generation)

2006–2018SUV (5 doors)183.9 in (4,671 mm)

The first generation Toyota FJ Cruiser is the only generation in this catalog. Its tall body height of 71.3 in (1,811 mm) means the roof is wrapped from a platform and that adds time. The J15 body code covers the 2006 to 2018 production run.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (71.3 in (1,811 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on an FJ Cruiser

A partial wrap on a Toyota FJ Cruiser can cover the roof, hood, and mirror caps. FJ Cruiser chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that can be put on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota FJ Cruiser: body, cut-outs and film

A Toyota FJ Cruiser vinyl wrap covers a five-door SUV that is 183.9 in (4,671 mm) long. The tall body stands 71.3 in (1,811 mm) high and has large flat panels. These dimensions mean a full wrap uses more film than a small hatchback and the roof needs a platform for safe install.

FJ Cruiser wrap ideas can work with the tailgate that has the rear glass in it. The film ends at the edge of that glass, so the hatch is wrapped as a panel around the window. The roof is tall enough that installers use a platform rather than a stepladder.

When you ask how much vinyl to wrap an FJ Cruiser, the answer starts at about 62 ft (19 m) of 60-inch (1.52 m) cast film. The single generation means the body size stayed the same through the whole 2006 to 2018 production run. The roof and the tall sides are the main places where extra film is used.

Questions about wrapping a Toyota FJ Cruiser

How much vinyl does it take to wrap a Toyota FJ Cruiser?

A full wrap of a Toyota FJ Cruiser takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, the estimate is about 79 ft (24 m).

Can I wrap only the hood or the roof of an FJ Cruiser?

Yes, you can wrap only the hood or the roof of an FJ Cruiser. Those are common partial wrap options, along with mirror caps. Chrome delete for the window trim and badges is also a smaller job.

Is an FJ Cruiser hard to wrap?

An FJ Cruiser has details that add work to a wrap. The tailgate has the rear glass in it, so the film must be trimmed cleanly at the edge of the glass. The body is 71.3 in (1,811 mm) tall, so a platform is needed for the roof.

How many generations of the FJ Cruiser does this page cover?

This page covers one generation of the Toyota FJ Cruiser, produced from 2006 to 2018.