Wraps by car

Toyota Fortuner wrap

The Toyota Fortuner wrap page covers the two generations of this SUV, the first from 2004 to 2015 and the second from 2015 onward. A full vinyl wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 80 ft (24.5 m) to cover the same body.

2generations19.5 mof film for a full wrap

Toyota Fortuner, second generation, factory photo
Toyota Fortuner, second generation. Factory color shown.

Toyota Fortuner wrap colors and ideas

  • Fortuner black wrap
  • Fortuner white wrap
  • Fortuner gray wrap
  • Fortuner silver wrap
  • Fortuner red wrap
  • Fortuner blue wrap
  • Fortuner green wrap
  • Fortuner yellow wrap
  • Fortuner orange wrap
  • Fortuner purple wrap
  • Fortuner pink wrap
  • Fortuner teal wrap
  • Fortuner brown wrap
  • Fortuner gold wrap
  • Fortuner chrome wrap
  • Fortuner color shift wrap
  • Fortuner carbon fiber wrap
  • Fortuner camo and patterned wrap

How much vinyl to wrap a Toyota Fortuner

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowSUV (5 doors)188.8 in (4,795 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
2004–2015SUV (5 doors)185.2 in (4,705 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

Fortuner wrap cost factors

Fortuner wrap cost depends on the size of the body, the film, and the details of the car. The first generation needs about 62 ft (19 m) of film, while the second generation needs about 64 ft (19.5 m). Roof rails, parking sensors, cameras, and fog lamps add cut-outs and removal work on some trims. Chrome or patterned film uses more material, about 80 ft (24.5 m) for the second generation.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (72.2 in (1,835 mm)): the roof is wrapped from a platform.
  • Restyled in 2020: bumpers and lights differ between the versions, and so do the film cuts.

Fortuner wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Fortuner, second generation, factory photo
Factory color shown

2015–now Fortuner SUV (second generation)

2015–nowSUV (5 doors)188.8 in (4,795 mm)

The second generation Toyota Fortuner has been built since 2015 with the internal code AN160. Its restyling in 2020 changed the bumpers and lights, so film cut for the earlier version does not fit the later one. The body is 188.8 in (4,795 mm) long and 72.2 in (1,835 mm) tall. A full wrap takes about 64 ft (19.5 m) of 60-inch film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (72.2 in (1,835 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Toyota Fortuner, first generation, factory photo
Factory color shown

2004–2015 Fortuner SUV (first generation)

2004–2015SUV (5 doors)185.2 in (4,705 mm)

The first generation Toyota Fortuner was built from 2004 to 2015 with the codes AN50 and AN60. Paint age matters on a car of these years: panels may be original or repainted, and a test spot comes before a full wrap. The body is shorter at 185.2 in (4,705 mm) and needs about 62 ft (19 m) of film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (70.7 in (1,795 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on a Fortuner

A partial wrap on a Toyota Fortuner can be the roof, hood, or mirror caps instead of the whole body. A Fortuner chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Toyota Fortuner: body, cut-outs and film

The Toyota Fortuner vinyl wrap is planned around its five-door SUV body and its size: 188.8 in (4,795 mm) long and 72.2 in (1,835 mm) tall for the second generation. The tall roof means the installer works from a platform to reach the center of the roof panel. The large flat sides and tailgate keep the film layout straightforward, but the height adds handling time.

Fortuner wrap ideas start with the parts that need cut-outs or removal before the film goes on. A tailgate with the rear glass in it means the film ends at the edge of the glass, not under a seal. Roof rails on some trims come off before the roof is wrapped, or the film is cut along them. Parking sensors and cameras in the bumpers require cut-outs around each sensor and lens, and fog lamps need cut-outs in the bumper film.

How much vinyl to wrap a Fortuner depends on which generation you have, because the bodies are not the same size. The first generation is 185.2 in (4,705 mm) long and needs about 62 ft (19 m) of 60-inch film. The second generation is 188.8 in (4,795 mm) long and needs about 64 ft (19.5 m) of the same film. The restyling in 2020 changed bumpers and lights, so film cut for one version does not fit the other.

Questions about wrapping a Toyota Fortuner

How much vinyl does it take to wrap a Toyota Fortuner?

A full wrap of the newest Toyota Fortuner takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 80 ft (24.5 m). These figures come from the second generation body.

Which years of the Fortuner take the same film cuts?

The first generation Fortuner from 2004 to 2015 takes one set of film cuts, and the second generation from 2015 onward takes another. The 2020 restyling means the bumpers and lights are different from the earlier second-generation cars.

Can I wrap only the hood or the roof of a Fortuner?

Yes, you can wrap only the hood or the roof of a Fortuner without doing the whole car. Partial jobs include the roof, hood, and mirror caps. A chrome delete of the window trim and badges is another option.

Is a Fortuner hard to wrap?

A Fortuner is not the easiest wrap because of its tall body: the roof is 72.2 in (1,835 mm) high on the second generation, so the installer needs a platform. Roof rails, parking sensors, cameras, and fog lamps on some trims add cut-outs and removal work. The tailgate glass means the film ends at the edge of the glass.