Wraps by car

Toyota FunCargo wrap

A Toyota FunCargo wrap covers the full first-generation van (1999–2005) with vinyl wrap. This model has one generation in the catalog, the XP20 body. A complete wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 67 ft (20.5 m).

1generations17 mof film for a full wrap

Toyota FunCargo, first generation, factory photo
Toyota FunCargo, first generation. Factory color shown.

Toyota FunCargo wrap colors and ideas

  • FunCargo black wrap
  • FunCargo white wrap
  • FunCargo gray wrap
  • FunCargo silver wrap
  • FunCargo red wrap
  • FunCargo blue wrap
  • FunCargo green wrap
  • FunCargo yellow wrap
  • FunCargo orange wrap
  • FunCargo purple wrap
  • FunCargo pink wrap
  • FunCargo teal wrap
  • FunCargo brown wrap
  • FunCargo gold wrap
  • FunCargo chrome wrap
  • FunCargo color shift wrap
  • FunCargo carbon fiber wrap
  • FunCargo camo and patterned wrap

How much vinyl to wrap a Toyota FunCargo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2005van (5 doors)152.0 in (3,860 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

FunCargo wrap cost factors

FunCargo wrap cost depends on the film amount, the wrap type, and the labor for the XP20 body. A full color change uses about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film takes about 67 ft (20.5 m) and needs more time to align. The sliding door tracks and the five-door body add cut and finish work.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

FunCargo wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota FunCargo, first generation, factory photo
Factory color shown

1999–2005 FunCargo van (first generation)

1999–2005van (5 doors)152.0 in (3,860 mm)

The first-generation Toyota FunCargo (1999–2005) has sliding side doors where the tracks stay bare and decide where the film is cut. This van body is 152.0 in (3,860 mm) long and uses about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film takes about 67 ft (20.5 m) on the same body.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a FunCargo

FunCargo chrome delete is a partial wrap that covers the window trim and badges with black film, leaving the paint exposed elsewhere. A partial wrap can also cover the roof, hood, and mirror caps only. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota FunCargo: body, cut-outs and film

A Toyota FunCargo vinyl wrap has to work around a compact minivan body that is 152.0 in (3,860 mm) long. The van body has five doors, including sliding side doors that affect film layout. The short overall length keeps the side panels manageable for one installer. The tall roofline adds vertical surface area compared with a hatchback.

FunCargo wrap ideas start with the sliding side doors, because the door tracks stay bare and the film is cut along them. The door handles, mirrors, and badges need cut-outs or removal before wrapping. The front and rear bumpers are separate pieces that wrap more easily off the car. The roof rails, if fitted, are usually removed for a clean roof wrap.

How much vinyl to wrap a FunCargo depends on the first-generation XP20 body, produced from 1999 to 2005. The film estimate is about 56 ft (17 m) of 60-inch (1.52 m) cast film for a standard color change. If you choose chrome or patterned film, the estimate rises to about 67 ft (20.5 m) because of extra material for alignment. The body style is a five-door van, and the sliding door tracks do not get film.

Questions about wrapping a Toyota FunCargo

How much vinyl does it take to wrap a Toyota FunCargo?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a Toyota FunCargo. For chrome or patterned film, the estimate is about 67 ft (20.5 m). These figures are for the first-generation XP20 body.

Are the sliding doors of a FunCargo wrapped?

No, the sliding door tracks of a FunCargo are not wrapped. The tracks stay bare and the film is cut along them so the doors can open and close.

Can I wrap only the hood or the roof of a FunCargo?

Yes, you can wrap only the hood or the roof of a FunCargo as a partial wrap. A partial wrap can include the roof, hood, and mirror caps, or you can do a chrome delete on the trim and badges.

Is a FunCargo hard to wrap?

A FunCargo is not especially hard to wrap, but the sliding side doors and the tall van body add work. The door tracks stay bare and require precise cutting along them. The body is 152.0 in (3,860 mm) long, and the five-door shape adds seams and edges to finish.