Wraps by car

Toyota Gaia wrap

A Toyota Gaia wrap covers the full body of this first-generation minivan, sold from 1998 to 2004, with vinyl wrap. One complete wrap of the newest body uses about 66 ft (20 m) of 60-inch (1.52 m) cast film. The Gaia is a single-generation van known for its tall, flat-sided shape.

1generations20 mof film for a full wrap

Toyota Gaia, first generation, factory photo
Toyota Gaia, first generation. Factory color shown.

Toyota Gaia wrap colors and ideas

  • Gaia black wrap
  • Gaia white wrap
  • Gaia gray wrap
  • Gaia silver wrap
  • Gaia red wrap
  • Gaia blue wrap
  • Gaia green wrap
  • Gaia yellow wrap
  • Gaia orange wrap
  • Gaia purple wrap
  • Gaia pink wrap
  • Gaia teal wrap
  • Gaia brown wrap
  • Gaia gold wrap
  • Gaia chrome wrap
  • Gaia color shift wrap
  • Gaia carbon fiber wrap
  • Gaia camo and patterned wrap

How much vinyl to wrap a Toyota Gaia

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2004van (5 doors)181.9 in (4,620 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)

Gaia wrap cost factors

Gaia wrap cost is driven by the size of the van, the amount of film, and the work on the sliding door tracks. A full wrap needs about 66 ft (20 m) of 60-inch (1.52 m) cast film. Removing handles and badges adds labor. The roof and tall sides take more time than a sedan.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Gaia wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Gaia, first generation, factory photo
Factory color shown

1998–2004 Gaia van (first generation)

1998–2004van (5 doors)181.9 in (4,620 mm)

The first generation Toyota Gaia, made from 1998 to 2004, is the only body in this catalog. Its sliding side doors have tracks that stay bare, so the film is cut along them. The XM10 code identifies this van body.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on a Gaia

A partial wrap on a Gaia can cover the roof, hood, or mirror caps. Gaia chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Gaia: body, cut-outs and film

The Toyota Gaia vinyl wrap is shaped by the van body style and its length of 181.9 in (4,620 mm). Five doors and long, straight sides mean the installer works around big, simple panels. The roof is large, so a full wrap uses more film than a compact car. Careful layout is needed to cover the tall sides without a visible seam.

Gaia wrap ideas start with the sliding side doors, whose tracks stay bare and define where the film is cut. The door handles, mirrors, and badges come off for a cleaner result. The window trim can be left or covered as part of a chrome delete.

How much vinyl to wrap a Gaia depends on the generation, but this catalog lists one generation only. A 1998–2004 Gaia in the XM10 body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 77 ft (23.5 m). Counting film for the roof and the tall sides is the first step.

Questions about wrapping a Toyota Gaia

How much vinyl does it take to wrap a Toyota Gaia?

A Toyota Gaia full wrap takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. That figure is for the 1998–2004 van body. Patterned or chrome film needs about 77 ft (23.5 m).

Are the sliding doors of a Gaia wrapped?

Yes, the sliding doors of a Gaia are wrapped, but the door tracks stay bare. The film is cut along the tracks, so the doors can still slide. This is one of the key details of a Gaia wrap.

Can I wrap only the hood or the roof of a Gaia?

Yes, you can wrap only the hood or the roof of a Gaia. The roof is a common partial wrap choice, and mirror caps can be done too. A partial wrap uses less film than a full wrap.

Is a Gaia hard to wrap?

A Gaia is not a hard wrap for a shop, but the size adds work. The sliding door tracks must be worked around, and the tall sides and long roof take more film and time. Removing the handles and badges is also needed for a clean install.