Wraps by car

Toyota Granvia wrap

The Toyota Granvia wrap page covers the first generation van built from 1995 to 2002. Only one generation appears in this catalog. A full wrap of this body uses about 70 ft (21.5 m) of 60-inch (1.52 m) cast vinyl film.

1generations21.5 mof film for a full wrap

Toyota Granvia, first generation, factory photo
Toyota Granvia, first generation. Factory color shown.

Toyota Granvia wrap colors and ideas

  • Granvia black wrap
  • Granvia white wrap
  • Granvia gray wrap
  • Granvia silver wrap
  • Granvia red wrap
  • Granvia blue wrap
  • Granvia green wrap
  • Granvia yellow wrap
  • Granvia orange wrap
  • Granvia purple wrap
  • Granvia pink wrap
  • Granvia teal wrap
  • Granvia brown wrap
  • Granvia gold wrap
  • Granvia chrome wrap
  • Granvia color shift wrap
  • Granvia carbon fiber wrap
  • Granvia camo and patterned wrap

How much vinyl to wrap a Toyota Granvia

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1995–2002van (5 doors)188.6 in (4,790 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m)

Granvia wrap cost factors

Granvia wrap cost depends on film type, bodywork condition, and the size of the van. A full wrap of this 188.6 in (4,790 mm) body takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. Extra prep time for the door tracks and roof access also changes the labor total.

  • Film for a full wrap: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (77.4 in (1,965 mm)): the roof is wrapped from a platform.

Granvia wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Granvia, first generation, factory photo
Factory color shown

1995–2002 Granvia van (first generation)

1995–2002van (5 doors)188.6 in (4,790 mm)

The first generation Toyota Granvia is a five-door van produced from 1995 to 2002. The sliding side doors mean the tracks stay bare, and the film is cut along them. A full wrap uses the standard estimate of about 70 ft (21.5 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (77.4 in (1,965 mm)): the roof is wrapped from a platform.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).

Roof, hood, chrome delete and PPF on a Granvia

A Granvia chrome delete covers the window trim and badges with black film. A partial wrap can cover the roof, hood, or mirror caps instead of the whole van. Paint protection film (PPF) is another option: clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Granvia: body, cut-outs and film

A Toyota Granvia vinyl wrap follows the shape of a five-door van that is 188.6 in (4,790 mm) long. The one-piece box body keeps panel joins low, so the film runs in straight, even drops. The tall sides and flat roof add surface area, which is why the estimate is higher than for a small car.

Granvia wrap ideas must work around the two sliding side doors. The door tracks stay bare, and the film is cut along them so the doors still open cleanly. The tall body stands 77.4 in (1,965 mm) high, so the roof is wrapped from a platform.

How much vinyl to wrap a Granvia depends on the film type and waste. A plain color change needs about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 14 ft (4 m), for roughly 84 ft (25.5 m).

Questions about wrapping a Toyota Granvia

How much vinyl does it take to wrap a Toyota Granvia?

It takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast vinyl film to wrap a Toyota Granvia. That figure covers the first generation five-door van. Chrome or patterned film adds about 14 ft (4 m), for 84 ft (25.5 m).

Are the sliding doors of a Granvia wrapped?

No, the sliding doors of a Granvia are not fully wrapped. The door tracks stay bare, and the film is cut along them. This keeps the doors working and the track area clean.

Can I wrap only the hood or the roof of a Granvia?

Yes, you can wrap only the hood or the roof of a Granvia. A partial wrap can cover the roof, hood, or mirror caps. A chrome delete on the window trim and badges is another smaller job.

Is a Granvia hard to wrap?

A Granvia is harder to wrap than a small car but not the hardest van. The sliding side door tracks stay bare, so the film must be cut along them neatly. The tall body at 77.4 in (1,965 mm) means the roof is wrapped from a platform.