Wraps by car

Toyota HiAce Grand wrap

The Toyota HiAce Grand wrap page covers the single generation sold from 1999 to 2002 and the film a full vinyl wrap of its tall van body takes. The first-generation HiAce Grand is a five-door minivan with a length of 188.6 in (4,790 mm). A full wrap of the newest body uses about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. If the film is chrome or patterned, plan for about 84 ft (25.5 m).

1generations21.5 mof film for a full wrap

Toyota HiAce Grand, first generation, factory photo
Toyota HiAce Grand, first generation. Factory color shown.

Toyota HiAce Grand wrap colors and ideas

  • HiAce Grand black wrap
  • HiAce Grand white wrap
  • HiAce Grand gray wrap
  • HiAce Grand silver wrap
  • HiAce Grand red wrap
  • HiAce Grand blue wrap
  • HiAce Grand green wrap
  • HiAce Grand yellow wrap
  • HiAce Grand orange wrap
  • HiAce Grand purple wrap
  • HiAce Grand pink wrap
  • HiAce Grand teal wrap
  • HiAce Grand brown wrap
  • HiAce Grand gold wrap
  • HiAce Grand chrome wrap
  • HiAce Grand color shift wrap
  • HiAce Grand carbon fiber wrap
  • HiAce Grand camo and patterned wrap

How much vinyl to wrap a Toyota HiAce Grand

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2002van (5 doors)188.6 in (4,790 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m)

HiAce Grand wrap cost factors

HiAce Grand wrap cost depends on the size of the body and the film you choose. The van is 188.6 in (4,790 mm) long and 77.4 in (1,965 mm) tall, which needs about 70 ft (21.5 m) of film for a basic color. A chrome or patterned film takes about 84 ft (25.5 m) and adds more labor for pattern alignment. The sliding doors and tall roof also add time that affects the final cost.

  • Film for a full wrap: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (77.4 in (1,965 mm)): the roof is wrapped from a platform.

HiAce Grand wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota HiAce Grand, first generation, factory photo
Factory color shown

1999–2002 HiAce Grand van (first generation)

1999–2002van (5 doors)188.6 in (4,790 mm)

The first-generation Toyota HiAce Grand was produced from 1999 to 2002 as a five-door minivan. Its sliding side doors have tracks that stay bare, so the film is cut along those tracks on every wrap. The body is 188.6 in (4,790 mm) long, which is important when ordering film for this generation. A wrappers counts one extra panel for each sliding door because the film stops at the track.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (77.4 in (1,965 mm)): the roof is wrapped from a platform.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).

Roof, hood, chrome delete and PPF on a HiAce Grand

HiAce Grand chrome delete covers the window trim and badges with black film, and a partial wrap can include the roof, hood, or mirror caps. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done with the doors closed. The sliding door tracks are not touched in a partial wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota HiAce Grand: body, cut-outs and film

A Toyota HiAce Grand vinyl wrap is planned around the single body style and the van's large, flat sides. The five-door minivan measures 188.6 in (4,790 mm) long and 77.4 in (1,965 mm) tall, so the roof and side panels use long, straight sheets. The sliding side doors add extra film but their tracks are left bare. These dimensions make a full wrap a straightforward job with few curved surfaces.

HiAce Grand wrap ideas begin with the parts that need cut-outs or are removed before film is applied. The sliding side doors have tracks that stay bare, so the film is cut along those lines. The door handles, mirrors, and trim are removed for a clean edge around each panel. The tall roof is wrapped from a platform, and the rear hinges are worked around rather than removed.

How much vinyl to wrap a HiAce Grand depends on which generation you have, but there is only one generation from 1999 to 2002. Every first-generation body takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film for a standard color. Chrome or patterned film needs about 84 ft (25.5 m) because the pattern must be matched at the seams. There are no other generations to change the film count.

Questions about wrapping a Toyota HiAce Grand

How much vinyl does it take to wrap a Toyota HiAce Grand?

A full wrap of a Toyota HiAce Grand takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the amount goes up to about 84 ft (25.5 m) because the pattern must be matched. The figure is the same for the only generation of this van, sold from 1999 to 2002. The tall body and long wheelbase mean every panel is large.

Are the sliding doors of a HiAce Grand wrapped?

Yes, the sliding doors of a HiAce Grand are wrapped, but the door tracks stay bare. The film is cut along the edge of each track so the door still opens freely. This is a standard detail on the first-generation HiAce Grand, which has sliding doors on both sides.

Can I wrap only the hood or the roof of a HiAce Grand?

Yes, you can wrap only the hood or the roof of a HiAce Grand as a partial wrap. The roof is often wrapped with a contrasting color, and the hood can be done alone or with mirror caps. A chrome delete of the window trim and badges is another partial option. Paint protection film on the front end protects the hood and bumper without changing the color.

Is a HiAce Grand hard to wrap?

A HiAce Grand is not hard to wrap, but the tall body and sliding doors add work. The roof is 77.4 in (1,965 mm) high, so a platform is needed for safe access. The sliding door tracks must be masked and cut precisely, which takes time. Overall, the flat sides make the HiAce Grand a manageable van for a full wrap.