Wraps by car

Toyota HiAce Touring wrap

The Toyota HiAce Touring wrap covers this first-generation minivan, sold from 1999 to 2002. A vinyl wrap on the full body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. The van body has four doors, including sliding side doors. This page guides you through the film amounts, wrap ideas, and the main steps for this car.

1generations20 mof film for a full wrap

Toyota HiAce Touring, first generation, factory photo
Toyota HiAce Touring, first generation. Factory color shown.

Toyota HiAce Touring wrap colors and ideas

  • HiAce Touring black wrap
  • HiAce Touring white wrap
  • HiAce Touring gray wrap
  • HiAce Touring silver wrap
  • HiAce Touring red wrap
  • HiAce Touring blue wrap
  • HiAce Touring green wrap
  • HiAce Touring yellow wrap
  • HiAce Touring orange wrap
  • HiAce Touring purple wrap
  • HiAce Touring pink wrap
  • HiAce Touring teal wrap
  • HiAce Touring brown wrap
  • HiAce Touring gold wrap
  • HiAce Touring chrome wrap
  • HiAce Touring color shift wrap
  • HiAce Touring carbon fiber wrap
  • HiAce Touring camo and patterned wrap

How much vinyl to wrap a Toyota HiAce Touring

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2002van (4 doors)188.8 in (4,795 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)

HiAce Touring wrap cost factors

HiAce Touring wrap cost depends on the film amount, the areas you cover, and the cut-outs this van needs. A full wrap uses about 66 ft (20 m) of 60-inch (1.52 m) cast film, or about 77 ft (23.5 m) for chrome or patterned film. The sliding door tracks add cutting time, and the four doors and badges need extra work. A smaller job like a hood or roof wrap uses less film and less labor.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: van (4 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

HiAce Touring wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota HiAce Touring, first generation, factory photo
Factory color shown

1999–2002 HiAce Touring van (first generation)

1999–2002van (4 doors)188.8 in (4,795 mm)

The first-generation Toyota HiAce Touring has one body style: a four-door van with sliding side doors. The film estimate for a full wrap is about 66 ft (20 m) of 60-inch (1.52 m) cast film. The sliding door tracks stay bare, and the film is cut along them. This generation ran from 1999 to 2002, with a length of 188.8 in (4,795 mm).

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on a HiAce Touring

Partial wraps on a HiAce Touring include the roof, hood, and mirror caps as single panels. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These jobs use less film than a full wrap and leave the sliding door tracks untouched.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota HiAce Touring: body, cut-outs and film

A Toyota HiAce Touring vinyl wrap must handle a length of 188.8 in (4,795 mm) and one sliding door on each side. The size is close to a standard minivan, so the hood, roof, and tall side panels all use wide film cuts. The sliding doors move along external tracks, which stay free of film. A full wrap on this body needs careful planning around those long, flat panels.

HiAce Touring wrap ideas start with the sliding side doors, because the door tracks stay bare and decide where the film is cut. The installer cuts the vinyl along the track edges and leaves the metal rails clean. The mirrors, door handles, and badges also need cut-outs or removal before the film goes on. You can add a chrome delete on the window trim and badges as a smaller job.

How much vinyl to wrap a HiAce Touring depends on the body, and the first generation has only one van body style. The factory length of 188.8 in (4,795 mm) is the same for all cars of this generation. A standard color change uses about 66 ft (20 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate rises to about 77 ft (23.5 m) because of the matching needed.

Questions about wrapping a Toyota HiAce Touring

How much vinyl does it take to wrap a Toyota HiAce Touring?

A Toyota HiAce Touring full wrap takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. That amount is for the standard color change on the first-generation van body. With chrome or patterned film, the estimate is about 77 ft (23.5 m) because the pattern must be matched at the seams.

Are the sliding doors of a HiAce Touring wrapped?

Yes, the sliding doors of a HiAce Touring are wrapped, but the tracks stay bare. The film is cut along the door tracks so the doors can still slide. The installer works around the track edges and leaves the metal rails clean.

Can I wrap only the hood or the roof of a HiAce Touring?

Yes, you can wrap only the hood or the roof of a HiAce Touring. A partial wrap also includes mirror caps as a single-panel job. These smaller areas use less film than a full wrap and do not involve the sliding door tracks.

Is a HiAce Touring hard to wrap?

A HiAce Touring is not the easiest wrap, mostly because of the sliding side doors. The door tracks stay bare and require precise cutting along their edges. The van is also long at 188.8 in (4,795 mm), so the side panels need long, straight film runs. The four doors, mirrors, and badges add time for cut-outs or removal.