Wraps by car

Toyota Highlander wrap

A Toyota Highlander wrap changes the look of this large SUV with vinyl film. The Highlander has four generations in this catalog, from 2000 to the present. A full wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film.

4generations20 mof film for a full wrap

Toyota Highlander, fourth generation, factory photo
Toyota Highlander, fourth generation. Factory color shown.

Toyota Highlander wrap colors and ideas

  • Highlander black wrap
  • Highlander white wrap
  • Highlander gray wrap
  • Highlander silver wrap
  • Highlander red wrap
  • Highlander blue wrap
  • Highlander green wrap
  • Highlander yellow wrap
  • Highlander orange wrap
  • Highlander purple wrap
  • Highlander pink wrap
  • Highlander teal wrap
  • Highlander brown wrap
  • Highlander gold wrap
  • Highlander chrome wrap
  • Highlander color shift wrap
  • Highlander carbon fiber wrap
  • Highlander camo and patterned wrap

How much vinyl to wrap a Toyota Highlander

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)195.5 in (4,966 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)
2013–2020SUV (5 doors)191.5 in (4,865 mm) to 192.5 in (4,890 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
2007–2013SUV (5 doors)188.4 in (4,785 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
2000–2007SUV (5 doors)184.4 in (4,684 mm) to 184.6 in (4,690 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Highlander wrap cost factors

Highlander wrap cost depends on the size of the car, the film chosen, and the labor for its details. The newest body is 195.5 in (4,966 mm) long and has roof rails and cameras on every trim. Larger generations use more film, and extra cut-outs increase installation time. A chrome or patterned film also raises the total.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Every trim has a tow hitch: a cut-out in the rear bumper film.
  • A tall body (69.1 in (1,755 mm)): the roof is wrapped from a platform.

Highlander wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Highlander, fourth generation, factory photo
Factory color shown

2020–now Highlander SUV (fourth generation)

2020–nowSUV (5 doors)195.5 in (4,966 mm)

The fourth-generation Highlander has a glass roof on some trims that is not wrapped. The film ends at the roof rails, so the glass stays dark whatever the color of the film. This roof panel changes the look of a full wrap and reduces the amount of film needed.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Every trim has a tow hitch: a cut-out in the rear bumper film.

A tall body (69.1 in (1,755 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Toyota Highlander, third generation, factory photo
Factory color shown

2013–2020 Highlander SUV (third generation)

2013–2020SUV (5 doors)191.5 in (4,865 mm) to 192.5 in (4,890 mm)

The third-generation Highlander was restyled in 2016, and the bumpers and lights changed. Film cut for one version does not fit the other, so the exact year matters when ordering a pre-cut kit. A wrapper measures the car before cutting to avoid wasted film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (69.7 in (1,770 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Toyota Highlander, second generation, factory photo
Factory color shown

2007–2013 Highlander SUV (second generation)

2007–2013SUV (5 doors)188.4 in (4,785 mm)

The second-generation Highlander has a tall body at 69.3 in (1,760 mm), so the roof is wrapped from a platform. This makes the roof take more time than on a lower vehicle. The extra height also means the installer needs more reach for the upper panels.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (69.3 in (1,760 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Toyota Highlander, first generation, factory photo
Factory color shown

2000–2007 Highlander SUV (first generation)

2000–2007SUV (5 doors)184.4 in (4,684 mm) to 184.6 in (4,690 mm)

The first-generation Highlander from 2000 to 2007 may have original or repainted panels. Paint age matters, so a test spot comes before a full wrap to check adhesion. Older paint can be more fragile when the film is removed or repositioned.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Highlander

A partial wrap on a Highlander covers the hood, mirror caps, and the roof on cars without the glass panel. Highlander chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Toyota Highlander: body, cut-outs and film

A Toyota Highlander vinyl wrap has to cover a tall five-door SUV body. The newest generation is 195.5 in (4,966 mm) long, while the first generation is 184.4 in (4,684 mm) to 184.6 in (4,690 mm). That size means more material and more time than wrapping a smaller car. The roof is high, so installers work from a platform.

Highlander wrap ideas start with the parts that need extra work. Every trim has roof rails and cameras, and some trims add parking sensors or a sunroof. The film is cut around each sensor and lens, and the rails come off before the roof is wrapped. The tailgate glass is not covered, so the film ends at its edge.

How much vinyl to wrap a Highlander depends on the generation. The fourth generation needs about 66 ft (20 m) of 60-inch (1.52 m) cast film, while the first generation needs about 62 ft (19 m). The second and third generations fall between, at 64 ft (19.5 m) and 66 ft (20 m). A chrome or patterned film adds about 20 percent more.

Questions about wrapping a Toyota Highlander

How much vinyl does it take to wrap a Toyota Highlander?

It takes about 66 ft (20 m) of 60-inch (1.52 m) cast film to wrap a Toyota Highlander of the newest generation. That is for a full color change wrap, with a chrome or patterned film needing more. The first generation uses about 62 ft (19 m).

Can the roof of a Highlander be wrapped?

Yes, the roof of a Highlander can be wrapped. Some trims have a panoramic glass roof or a sunroof, and the glass is not wrapped, so the film is cut around the opening. Every trim has roof rails that come off before the roof is wrapped.

Can I wrap only the hood or the roof of a Highlander?

Yes, you can wrap only the hood or the roof of a Highlander. A partial wrap can cover the hood, mirror caps, and the roof on cars without the glass panel. A chrome delete covers window trim and badges instead of full panels.

Is a Highlander hard to wrap?

A Highlander is not hard to wrap, but it has details that add work. Every trim has roof rails and cameras, and some trims have parking sensors or a sunroof that need cut-outs. The tall body means the roof is wrapped from a platform, which takes more time.