Wraps by car

Toyota Innova wrap

The Toyota Innova wrap page covers both generations of this minivan. A full wrap of the newest body takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast vinyl wrap film. The first generation, sold from 2004 to 2015, needs about 67 ft (20.5 m) of the same film.

2generations21.5 mof film for a full wrap

Toyota Innova, second generation, factory photo
Toyota Innova, second generation. Factory color shown.

Toyota Innova wrap colors and ideas

  • Innova black wrap
  • Innova white wrap
  • Innova gray wrap
  • Innova silver wrap
  • Innova red wrap
  • Innova blue wrap
  • Innova green wrap
  • Innova yellow wrap
  • Innova orange wrap
  • Innova purple wrap
  • Innova pink wrap
  • Innova teal wrap
  • Innova brown wrap
  • Innova gold wrap
  • Innova chrome wrap
  • Innova color shift wrap
  • Innova carbon fiber wrap
  • Innova camo and patterned wrap

How much vinyl to wrap a Toyota Innova

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowvan (5 doors)186.4 in (4,735 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
2004–2015van (5 doors)179.3 in (4,555 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)

Innova wrap cost factors

Innova wrap cost depends on the generation, the film finish, and the condition of the paint. The second generation is 186.4 in (4,735 mm) long and needs more material than the first generation at 179.3 in (4,555 mm). Chrome or patterned film adds about 10 ft (3 m) of material to the job. Paint correction before wrapping also affects the total.

  • Film for a full wrap: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (70.7 in (1,795 mm)): the roof is wrapped from a platform.
  • Restyled in 2020: bumpers and lights differ between the versions, and so do the film cuts.

Innova wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Innova, second generation, factory photo
Factory color shown

2015–now Innova van (second generation)

2015–nowvan (5 doors)186.4 in (4,735 mm)

The second generation Toyota Innova, sold from 2015 to now, has sliding side doors that dictate the film cuts. The door tracks stay bare, so the vinyl is trimmed along them. This generation received a restyling in 2020, but the body shell and the film cuts remain the same.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (70.7 in (1,795 mm)): the roof is wrapped from a platform.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Toyota Innova, first generation, factory photo
Factory color shown

2004–2015 Innova van (first generation)

2004–2015van (5 doors)179.3 in (4,555 mm)

The first generation Toyota Innova, sold from 2004 to 2015, often has aging paint on a car of these years. Panels may be original or repainted, and a test spot comes before a full wrap. This generation is shorter at 179.3 in (4,555 mm), which slightly reduces the material needed.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on an Innova

Partial wrap options for the Toyota Innova include the roof, hood, and mirror caps. Innova chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to protect against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Toyota Innova: body, cut-outs and film

The Toyota Innova vinyl wrap follows its boxy minivan shape and five-door layout. The second generation measures 186.4 in (4,735 mm) long, while the first generation is 179.3 in (4,555 mm) long. Both generations have a tall roof that adds material to the job. The sliding side doors influence where the vinyl is cut, but the door tracks stay bare.

Innova wrap ideas start with the sliding side doors: the door tracks stay bare, and the film is cut along them. A tall body means the roof is wrapped from a platform. The window trim and badges can be covered with black film for a chrome delete.

How much vinyl to wrap an Innova depends on the generation and film finish. The second generation needs about 70 ft (21.5 m) of 60-inch (1.52 m) cast film, while the first generation needs about 67 ft (20.5 m). A chrome or patterned film adds about 10 ft (3 m) to each estimate.

Questions about wrapping a Toyota Innova

How much vinyl does it take to wrap a Toyota Innova?

A full wrap of a Toyota Innova takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast vinyl film. This figure is for the second generation, sold from 2015 to now. The first generation uses slightly less at about 67 ft (20.5 m).

Are the sliding doors of an Innova wrapped?

Yes, the sliding doors of an Innova are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can still open and close smoothly. This applies to both generations of the Innova.

Which years of the Innova take the same film cuts?

The Toyota Innova has two generations with different film cuts. The first generation covers 2004 to 2015, and the second generation covers 2015 to now. Within the second generation, the 2020 restyling did not change the body shell, so the film cuts remain the same from 2015 onward.

Can I wrap only the hood or the roof of an Innova?

Yes, you can wrap only the hood or the roof of an Innova. Partial wrap options include the roof, hood, and mirror caps as separate jobs. It is also possible to do a chrome delete on the window trim and badges, or to apply clear paint protection film to the front end.