Wraps by car

Toyota iQ wrap

The Toyota iQ wrap page covers the single generation built from 2009 to 2016. A full vinyl wrap of this mini hatchback takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. The page explains body-specific details, film amounts, and wrap options for the iQ.

1generations12.5 mof film for a full wrap

Toyota iQ, first generation, factory photo
Toyota iQ, first generation. Factory color shown.

Toyota iQ wrap colors and ideas

  • iQ black wrap
  • iQ white wrap
  • iQ gray wrap
  • iQ silver wrap
  • iQ red wrap
  • iQ blue wrap
  • iQ green wrap
  • iQ yellow wrap
  • iQ orange wrap
  • iQ purple wrap
  • iQ pink wrap
  • iQ teal wrap
  • iQ brown wrap
  • iQ gold wrap
  • iQ chrome wrap
  • iQ color shift wrap
  • iQ carbon fiber wrap
  • iQ camo and patterned wrap

How much vinyl to wrap a Toyota iQ

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2016hatchback (3 doors)117.5 in (2,985 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

iQ wrap cost factors

The iQ wrap cost depends on the type of film, the amount of disassembly, and the condition of the paint. This mini hatchback needs about 41 ft (12.5 m) of standard cast film, which sets a baseline for material. Its three-door body means fewer panel gaps than a five-door, but the fog lamp cut-outs and tailgate glass add labor. A wrap shop will also factor in paint correction before installation if the original paint is rough.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

iQ wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota iQ, first generation, factory photo
Factory color shown

2009–2016 iQ hatchback (first generation)

2009–2016hatchback (3 doors)117.5 in (2,985 mm)

The first generation Toyota iQ from 2009 to 2016 is the only body covered in this catalog. Panels on a car of these years may be original or repainted, so a test spot is wise before a full wrap. That test checks whether the film will adhere well to the existing paint. The generation includes only a three-door hatchback, so film calculations are consistent.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on an iQ

A partial wrap on a Toyota iQ can cover the roof, hood, or mirror caps for a smaller change. A chrome delete covers the window trim and badges with black film to change the brightwork. Paint protection film (PPF) can be applied as clear film on the front end to guard against stone chips. These smaller jobs use less material and are often done without taking the car apart.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota iQ: body, cut-outs and film

The Toyota iQ vinyl wrap follows the small footprint of a 3-door hatchback, so it uses less film than a larger car. The body is 117.5 in (2,985 mm) long, and most panels are compact enough for single manageable pieces. The two long side doors still need large sheets to avoid seams. The tall tailgate includes the rear glass, which changes how the film is trimmed.

The iQ has three wrap-specific details to plan around, including fog lamps in the front bumper on every trim. The bumper film needs cut-outs for those lamps, which adds time for precise trimming. The tailgate has the rear glass set into it, so the film ends at the edge of the glass. Each of the two long side doors is wrapped as one large piece of film.

How much vinyl to wrap an iQ depends on the generation, and this page covers only the first generation from 2009 to 2016. Since there is one body style in this catalog, the amount does not change between generations. The listed figure of about 41 ft (12.5 m) applies to the whole first generation run. If you choose chrome or patterned film, plan for about 48 ft (14.5 m).

Questions about wrapping a Toyota iQ

How much vinyl does it take to wrap a Toyota iQ?

It takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film to wrap a Toyota iQ. This amount is for a standard color change wrap on the first generation. If you use chrome or patterned film, the estimate rises to about 48 ft (14.5 m).

Can I wrap only the hood or the roof of an iQ?

Yes, you can wrap only the hood or the roof of an iQ. A partial wrap of the roof, hood, or mirror caps is a smaller job than a full wrap. These panels can be done individually, and they use much less film than the full car.

Is an iQ hard to wrap?

An iQ is not the easiest car to wrap because of the fog lamps in the front bumper and the glass in the tailgate. Those details require careful cut-outs and trimming. The two long side doors are large single pieces, but the small overall size helps keep the job manageable.

How many generations of the iQ does this page cover?

This page covers one generation of the Toyota iQ, the first generation produced from 2009 to 2016. There are no other generations of this mini hatchback in the catalog.