Wraps by car

Toyota Kluger wrap

The Toyota Kluger wrap page covers two generations of this mid-size SUV, from 2000 to 2013. A full vinyl wrap of the newest body uses about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 80 ft (24.5 m). The older body takes slightly less film.

2generations19.5 mof film for a full wrap

Toyota Kluger, second generation, factory photo
Toyota Kluger, second generation. Factory color shown.

Toyota Kluger wrap colors and ideas

  • Kluger black wrap
  • Kluger white wrap
  • Kluger gray wrap
  • Kluger silver wrap
  • Kluger red wrap
  • Kluger blue wrap
  • Kluger green wrap
  • Kluger yellow wrap
  • Kluger orange wrap
  • Kluger purple wrap
  • Kluger pink wrap
  • Kluger teal wrap
  • Kluger brown wrap
  • Kluger gold wrap
  • Kluger chrome wrap
  • Kluger color shift wrap
  • Kluger carbon fiber wrap
  • Kluger camo and patterned wrap

How much vinyl to wrap a Toyota Kluger

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2013SUV (5 doors)188.4 in (4,785 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
2000–2007SUV (5 doors)184.4 in (4,685 mm) to 184.6 in (4,690 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Kluger wrap cost factors

Kluger wrap cost depends on the size of the car, the film and the amount of disassembly. The second-generation body is 188.4 in (4,785 mm) long and needs about 64 ft (19.5 m) of film, while the first generation is 184.4 in (4,685 mm) to 184.6 in (4,690 mm) and uses about 62 ft (19 m). Chrome or patterned film raises the cost because it uses about 80 ft (24.5 m) or 70 ft (21.5 m). Labor time also changes with the number of parts removed, like handles, mirrors and badges.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (69.3 in (1,760 mm)): the roof is wrapped from a platform.
  • Restyled in 2010: bumpers and lights differ between the versions, and so do the film cuts.

Kluger wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Kluger, second generation, factory photo
Factory color shown

2007–2013 Kluger SUV (second generation)

2007–2013SUV (5 doors)188.4 in (4,785 mm)

The second-generation Toyota Kluger (2007–2013) received a restyling in 2010. Bumpers and lights changed shape, which means film patterns cut for the earlier version do not fit the later one. When ordering pre-cut film or planning a partial wrap, confirm whether your car is before or after the restyling.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (69.3 in (1,760 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Toyota Kluger, first generation, factory photo
Factory color shown

2000–2007 Kluger SUV (first generation)

2000–2007SUV (5 doors)184.4 in (4,685 mm) to 184.6 in (4,690 mm)

The first-generation Toyota Kluger (2000–2007) is now an older vehicle, so paint condition varies. Some panels may have been repainted, and old paint can lift when film is removed. A test spot on a small area checks paint adhesion before a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Kluger

A partial wrap on a Toyota Kluger can cover the roof, hood or mirror caps. Kluger chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Kluger: body, cut-outs and film

A Toyota Kluger vinyl wrap is a large job on a five-door SUV body. The second generation is 188.4 in (4,785 mm) long and 69.3 in (1,760 mm) tall, so installers wrap the roof from a platform. The first generation is a little shorter at 184.4 in (4,685 mm) to 184.6 in (4,690 mm). Both bodies have a big tailgate, hood and roof that use most of the film.

Kluger wrap ideas start with the tailgate, where the rear glass is set into the panel. The film ends at the edge of the glass, so the installer cuts around it cleanly. Door handles, mirrors and badges come off for a neater finish. On the second generation, the tall roof is easier to reach from a platform.

How much vinyl to wrap a Kluger depends on the generation and the film type. A second-generation car (2007–2013) takes about 64 ft (19.5 m) of 60-inch cast film, while a first-generation car (2000–2007) takes about 62 ft (19 m). Chrome or patterned film adds waste because the pattern must line up, so those jobs need about 80 ft (24.5 m) or 70 ft (21.5 m) respectively.

Questions about wrapping a Toyota Kluger

How much vinyl does it take to wrap a Toyota Kluger?

A full wrap of a Toyota Kluger, newest body, takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 80 ft (24.5 m). The first generation takes slightly less: about 62 ft (19 m) or 70 ft (21.5 m) respectively.

Which years of the Kluger take the same film cuts?

Each generation of the Kluger uses the same film cuts within its own years, except for restyling years. The second generation (2007–2013) was restyled in 2010, so bumpers and lights differ between early and late cars. The first generation (2000–2007) was restyled in 2003, so the same split applies.

Can I wrap only the hood or the roof of a Kluger?

Yes, you can wrap only the hood or the roof of a Kluger. Partial wrap jobs on this car often include the roof, hood or mirror caps. A roof wrap is easier on the second generation because the tall body is reached from a platform.

Is a Kluger hard to wrap?

A Kluger is not especially hard to wrap, but its size adds work. The second generation is 188.4 in (4,785 mm) long and 69.3 in (1,760 mm) tall, so the roof is wrapped from a platform. The tailgate has the rear glass in it, so the film ends at the edge of the glass and needs a clean cut.