Wraps by car

Toyota Land Cruiser Prado wrap

The Toyota Land Cruiser Prado wrap page covers this SUV through five generations, from 1987 to the present. A full vinyl wrap of the newest fifth generation body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film for the same body takes about 69 ft (21 m).

5generations17.5 mof film for a full wrap

Toyota Land Cruiser Prado, fifth generation, factory photo
Toyota Land Cruiser Prado, fifth generation. Factory color shown.

Toyota Land Cruiser Prado wrap colors and ideas

  • Land Cruiser Prado black wrap
  • Land Cruiser Prado white wrap
  • Land Cruiser Prado gray wrap
  • Land Cruiser Prado silver wrap
  • Land Cruiser Prado red wrap
  • Land Cruiser Prado blue wrap
  • Land Cruiser Prado green wrap
  • Land Cruiser Prado yellow wrap
  • Land Cruiser Prado orange wrap
  • Land Cruiser Prado purple wrap
  • Land Cruiser Prado pink wrap
  • Land Cruiser Prado teal wrap
  • Land Cruiser Prado brown wrap
  • Land Cruiser Prado gold wrap
  • Land Cruiser Prado chrome wrap
  • Land Cruiser Prado color shift wrap
  • Land Cruiser Prado carbon fiber wrap
  • Land Cruiser Prado camo and patterned wrap

How much vinyl to wrap a Toyota Land Cruiser Prado

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowSUV (5 doors)193.7 in (4,920 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2009–2024SUV (3 or 5 doors)173.0 in (4,395 mm) to 190.6 in (4,840 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)
2002–2009SUV (3 or 5 doors)170.9 in (4,340 mm) to 190.9 in (4,850 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
1996–2002SUV (3 or 5 doors)170.5 in (4,330 mm) to 184.6 in (4,690 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)
1987–1996SUV (3 or 5 doors)155.3 in (3,945 mm) to 180.5 in (4,585 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Land Cruiser Prado wrap cost factors

Land Cruiser Prado wrap cost depends mainly on the size of the body, the number of cut-outs, and the film type. The newest generation is 193.7 in (4,920 mm) long with a panoramic glass roof, parking sensors, and cameras, all of which add labor. Chrome or patterned film uses about 69 ft (21 m) on the fifth generation, against about 57 ft (17.5 m) for a standard color.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • A tall body (73.6 in (1,870 mm)): the roof is wrapped from a platform.

Land Cruiser Prado wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Land Cruiser Prado, fifth generation, factory photo
Factory color shown

2024–now Land Cruiser Prado SUV (fifth generation)

2024–nowSUV (5 doors)193.7 in (4,920 mm)

The fifth generation Toyota Land Cruiser Prado has a panoramic glass roof on every trim, and the glass is not wrapped. The roof film ends at the roof rails, so the glass stays dark no matter what color film is chosen. The roof itself is wrapped from a platform because the body is 73.6 in (1,870 mm) tall.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

A tall body (73.6 in (1,870 mm)): the roof is wrapped from a platform.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Toyota Land Cruiser Prado, fourth generation, factory photo
Factory color shown

2009–2024 Land Cruiser Prado SUV (fourth generation)

2009–2024SUV (3 or 5 doors)173.0 in (4,395 mm) to 190.6 in (4,840 mm)

The fourth generation Toyota Land Cruiser Prado was restyled in 2013, 2017, and 2020, and the later changes matter for wraps. The 2017 and 2020 updates altered the bumpers and lights, so film cut for one version does not fit the other without new templates. Some trims have a panoramic glass roof, a sunroof, roof rails, or a styling kit, all of which change the cutting plan.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (77.0 in (1,955 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Toyota Land Cruiser Prado, third generation, factory photo
Factory color shown

2002–2009 Land Cruiser Prado SUV (third generation)

2002–2009SUV (3 or 5 doors)170.9 in (4,340 mm) to 190.9 in (4,850 mm)

The third generation Toyota Land Cruiser Prado has a tall body at 73.4 in (1,865 mm), and the roof is wrapped from a platform. Reaching the roof safely adds time to the job, and the roof panel is large because the body is up to 190.9 in (4,850 mm) long. Some trims have a sunroof, and the roof film is cut around its opening.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (73.4 in (1,865 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Toyota Land Cruiser Prado, second generation, factory photo
Factory color shown

1996–2002 Land Cruiser Prado SUV (second generation)

1996–2002SUV (3 or 5 doors)170.5 in (4,330 mm) to 184.6 in (4,690 mm)

The second generation Toyota Land Cruiser Prado is a car of its years, and paint age matters before a wrap. On a vehicle from 1996 to 2002, panels may be original or repainted, and a test spot comes before a full wrap to check adhesion. The body is 74.0 in (1,880 mm) tall, so the roof is wrapped from a platform.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (74.0 in (1,880 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Toyota Land Cruiser Prado, first generation, factory photo
Factory color shown

1987–1996 Land Cruiser Prado SUV (first generation)

1987–1996SUV (3 or 5 doors)155.3 in (3,945 mm) to 180.5 in (4,585 mm)

The first generation Toyota Land Cruiser Prado is the shortest of the five, at 155.3 in (3,945 mm) to 180.5 in (4,585 mm) depending on body style. The smaller size reduces the amount of film compared with later generations, but the 3-door and 5-door bodies still have many separate panels. A full wrap takes about 61 ft (18.5 m) of standard film for both body styles.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (74.4 in (1,890 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Land Cruiser Prado

A full wrap is not the only option for a Toyota Land Cruiser Prado: a partial wrap can cover the hood, mirror caps, and tailgate. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Toyota Land Cruiser Prado: body, cut-outs and film

A Toyota Land Cruiser Prado vinyl wrap deals with a tall SUV body that comes in 3-door and 5-door styles across the generations. The newest body is 193.7 in (4,920 mm) long, while older generations range from 155.3 in (3,945 mm) to 190.6 in (4,840 mm). The height, from 73.4 in (1,865 mm) to 77.0 in (1,955 mm), means installers need a platform to wrap the roof.

Land Cruiser Prado wrap ideas have to work around the tailgate, which has the rear glass set into it, so the film ends at the edge of the glass. Every trim of the latest generation has a panoramic glass roof, parking sensors, and cameras, and the film is cut around each of them. Some trims also have a sunroof, roof rails, or a styling kit that adds separate pieces.

How much vinyl to wrap a Land Cruiser Prado depends on the generation and the length of the body. The fifth generation needs about 57 ft (17.5 m) of standard film, while the third generation needs about 64 ft (19.5 m), the longest estimate in the catalog. The shorter first generation still takes about 61 ft (18.5 m), because the tall body and many panels keep the total high.

Questions about wrapping a Toyota Land Cruiser Prado

How much vinyl does it take to wrap a Toyota Land Cruiser Prado?

A Toyota Land Cruiser Prado needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full wrap of the newest body. That figure is for a standard color; chrome or patterned film takes about 69 ft (21 m). The estimate covers the fifth generation from 2024 onward.

Can the roof of a Land Cruiser Prado be wrapped?

Yes, the roof of a Land Cruiser Prado can be wrapped, but glass panels are not covered. The fifth generation has a panoramic glass roof on every trim, and the film ends at the roof rails. On all generations the roof is wrapped from a platform because the body is tall.

Can I wrap only the hood or the roof of a Land Cruiser Prado?

Yes, you can wrap only the hood or the roof of a Land Cruiser Prado. A partial wrap typically includes the hood, mirror caps, and tailgate, and the roof can be done on its own. The film is cut to fit the specific panel, and the roof is reached from a platform.

Is a Land Cruiser Prado hard to wrap?

A Land Cruiser Prado is not especially hard to wrap, but its size and details add work. The tall body means the roof is wrapped from a platform on every generation. The tailgate has the rear glass set into it, and the latest models have cameras and sensors that need careful cut-outs.