Wraps by car

Toyota Mark X wrap

The Toyota Mark X wrap guide covers the second and first generations of this full-size sedan. The catalog lists two generations: the second generation (X130) built from 2009 to 2019 and the first generation (X120) built from 2004 to 2009. A full wrap of the newest body needs about 52 ft (16 m) of 60-inch (1.52 m) cast vinyl wrap. With chrome or patterned film, the estimate is about 66 ft (20 m).

2generations16 mof film for a full wrap

Toyota Mark X, second generation, factory photo
Toyota Mark X, second generation. Factory color shown.

Toyota Mark X wrap colors and ideas

  • Mark X black wrap
  • Mark X white wrap
  • Mark X gray wrap
  • Mark X silver wrap
  • Mark X red wrap
  • Mark X blue wrap
  • Mark X green wrap
  • Mark X yellow wrap
  • Mark X orange wrap
  • Mark X purple wrap
  • Mark X pink wrap
  • Mark X teal wrap
  • Mark X brown wrap
  • Mark X gold wrap
  • Mark X chrome wrap
  • Mark X color shift wrap
  • Mark X carbon fiber wrap
  • Mark X camo and patterned wrap

How much vinyl to wrap a Toyota Mark X

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2019sedan (4 doors)186.2 in (4,730 mm) to 187.0 in (4,750 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2004–2009sedan (4 doors)186.2 in (4,730 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Mark X wrap cost factors

The Mark X wrap cost depends on the size of the car, the film, and the amount of disassembly. This full-size sedan is 186.2 in (4,730 mm) to 187.0 in (4,750 mm) long, so a full wrap takes about 52 ft (16 m) of 60-inch (1.52 m) cast film, or about 66 ft (20 m) for chrome or patterned film. A color change wrap costs more than a partial wrap because it covers more area and needs more film. Removing bumpers, lights, and trim adds labor time to the final cost.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).
  • Restyled in 2012: bumpers and lights differ between the versions, and so do the film cuts.

Mark X wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Mark X, second generation, factory photo
Factory color shown

2009–2019 Mark X sedan (second generation)

2009–2019sedan (4 doors)186.2 in (4,730 mm) to 187.0 in (4,750 mm)

The 2009–2019 generation of the Toyota Mark X, codenamed X130, received a restyling in 2012. Bumpers and lights changed in 2012, so film cut for one version does not fit the other. When you order pre-cut kits or re-use leftovers from an earlier car, you need to know whether the car is a 2009–2012 or a 2012–2019 production. The overall length also changed from 186.2 in (4,730 mm) to 187.0 in (4,750 mm) after the restyling.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Toyota Mark X, first generation, factory photo
Factory color shown

2004–2009 Mark X sedan (first generation)

2004–2009sedan (4 doors)186.2 in (4,730 mm)

The 2004–2009 generation of the Toyota Mark X, codenamed X120, is a sedan with a length of 186.2 in (4,730 mm). Paint age matters on a car of these years: panels may be original or repainted, and a test spot comes before a full wrap. A repainted panel may have weaker clear coat, so the film can lift paint when it is removed. Check each panel before you start and note any peeling or flaking areas for the wrap to stick properly.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Mark X

A partial wrap on the Toyota Mark X can be the roof, the hood, or the mirror caps as separate jobs. The roof is a high-impact area that suits a gloss black or carbon-look film. Mark X chrome delete covers the window trim and the badges, normally with a black satin film. Paint protection film (PPF) on the front end is another option: a clear film on the bumper, hood, and fenders to stop stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Mark X: body, cut-outs and film

The Toyota Mark X vinyl wrap is influenced by the sedan body style and full-size dimensions. Both generations are four-door sedans with a length of 186.2 in (4,730 mm), while the second generation after 2012 can be up to 187.0 in (4,750 mm). The large panels and relatively smooth shape make for a straightforward install, but the roof and trunk are big single pieces. An installer counts on about 52 ft (16 m) of film for a standard color change.

Mark X wrap ideas start with the trim around the side windows and the badges, which need cut-outs or removal. The door handles, mirrors, and antenna can be wrapped in place, but they are easier to do off the car. The front and rear bumpers have complex curves, so many installers take them off for better access. The grille and lower intake areas also require careful relief cuts and heat shaping.

How much vinyl to wrap a Mark X depends on the generation you have. The first generation (X120) from 2004 to 2009 and the second generation (X130) from 2009 to 2012 have the same 186.2 in (4,730 mm) length and the same film estimate of about 52 ft (16 m). For the restyled second generation after 2012, the length goes up to 187.0 in (4,750 mm), still within the same 52 ft (16 m) estimate. If you use chrome or patterned film, the estimate is about 66 ft (20 m) for any of these bodies.

Questions about wrapping a Toyota Mark X

How much vinyl does it take to wrap a Toyota Mark X?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap a Toyota Mark X in a standard color. For chrome or patterned film, the estimate is about 66 ft (20 m). This figure covers the newest body, the second generation from 2009 to 2019, with a full color change wrap. The first generation from 2004 to 2009 has the same estimate of about 52 ft (16 m).

Which years of the Mark X take the same film cuts?

The years of the Mark X that take the same film cuts are 2009 to 2012, and separately 2012 to 2019. The second generation X130 was produced from 2009 to 2019, but the 2012 restyling changed the bumpers and lights, so the pre- and post-restyling cars have different cuts. The first generation X120 from 2004 to 2009 has its own set of film cuts because it is a different body style.

Can I wrap only the hood or the roof of a Mark X?

Yes, you can wrap only the hood or the roof of a Mark X. These are the most common partial wrap jobs, along with the mirror caps. You can also do a chrome delete on the window trim and badges, or have clear paint protection film (PPF) on the front end. A roof wrap needs about 4 to 5 yards (3.6 to 4.6 m) of 60-inch (1.52 m) film depending on the sunroof.

Is a Mark X hard to wrap?

The Mark X is not hard to wrap, but its full-size body adds time. The car is 186.2 in (4,730 mm) to 187.0 in (4,750 mm) long, so the roof and rear quarter panels are large pieces that need two people to handle. The bumpers have deep recesses around the fog lights and grille, which take extra heat and relief cuts. The trim around the side windows is recessed, so tucking the film neatly is the part that adds work.