Wraps by car

Toyota MasterAce Surf wrap

A Toyota MasterAce Surf wrap covers this first-generation minivan, which was produced from 1982 to 1991. The van body with three doors takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film for a full color change wrap. Chrome or patterned film raises the estimate to about 76 ft (23 m). This page explains the film needs and the details an installer checks on this body.

1generations19.5 mof film for a full wrap

Toyota MasterAce Surf, first generation, factory photo
Toyota MasterAce Surf, first generation. Factory color shown.

Toyota MasterAce Surf wrap colors and ideas

  • MasterAce Surf black wrap
  • MasterAce Surf white wrap
  • MasterAce Surf gray wrap
  • MasterAce Surf silver wrap
  • MasterAce Surf red wrap
  • MasterAce Surf blue wrap
  • MasterAce Surf green wrap
  • MasterAce Surf yellow wrap
  • MasterAce Surf orange wrap
  • MasterAce Surf purple wrap
  • MasterAce Surf pink wrap
  • MasterAce Surf teal wrap
  • MasterAce Surf brown wrap
  • MasterAce Surf gold wrap
  • MasterAce Surf chrome wrap
  • MasterAce Surf color shift wrap
  • MasterAce Surf carbon fiber wrap
  • MasterAce Surf camo and patterned wrap

How much vinyl to wrap a Toyota MasterAce Surf

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1982–1991van (3 doors)175.8 in (4,465 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

MasterAce Surf wrap cost factors

A MasterAce Surf wrap cost is set by the size of the van and the labor on its body details. The body is 175.8 in (4,465 mm) long and 70.3 in (1,786 mm) tall, so a full wrap uses about 64 ft (19.5 m) of cast film. The sliding door tracks and the tall roof add time, and chrome or patterned film raises the material need to about 76 ft (23 m).

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: van (3 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Two long side doors: each door is one large piece of film.
  • A tall body (70.3 in (1,786 mm)): the roof is wrapped from a platform.

MasterAce Surf wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota MasterAce Surf, first generation, factory photo
Factory color shown

1982–1991 MasterAce Surf van (first generation)

1982–1991van (3 doors)175.8 in (4,465 mm)

The first-generation Toyota MasterAce Surf was built from 1982 to 1991 as a three-door van. Its sliding side doors have tracks that stay bare, so the installer cuts the film along the tracks. The two long side doors are each wrapped with one large piece of film. The tall body, at 70.3 in (1,786 mm), means the roof is wrapped from a platform.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Two long side doors: each door is one large piece of film.

A tall body (70.3 in (1,786 mm)): the roof is wrapped from a platform.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a MasterAce Surf

A partial wrap on a Toyota MasterAce Surf can cover the roof, hood, or mirror caps as a smaller job. A chrome delete on this van covers the window trim and badges with black film. Paint protection film (PPF) puts clear film on the front end. Each of these jobs uses less film than a full wrap of the 175.8 in (4,465 mm) body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota MasterAce Surf: body, cut-outs and film

A Toyota MasterAce Surf vinyl wrap on this van works with one tall three-door body style. The body is 175.8 in (4,465 mm) long and 70.3 in (1,786 mm) tall, so the roof is wrapped from a platform. Each long side door is one large piece of film, which keeps the sides clean. A full wrap of this minivan uses every inch of the film estimate.

MasterAce Surf wrap ideas start with the sliding side doors, where the door tracks stay bare and the film is cut along them. The two long side doors each take one large piece of film and need no seam across the panel. The tall body means the roof is wrapped from a platform, not from the ground. Cut-outs are kept to the door handles, locks and badges.

How much vinyl to wrap a MasterAce Surf depends on the body style and the film choice. The first generation, built from 1982 to 1991, has one body style: a three-door van. A full wrap with 60-inch (1.52 m) cast film needs about 64 ft (19.5 m). Chrome or patterned film needs about 76 ft (23 m) because the pattern must be matched.

Questions about wrapping a Toyota MasterAce Surf

How much vinyl does it take to wrap a Toyota MasterAce Surf?

A full wrap of a Toyota MasterAce Surf takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 76 ft (23 m) because the pattern must be matched across the panels. This estimate covers the first-generation three-door van body produced from 1982 to 1991.

Are the sliding doors of a MasterAce Surf wrapped?

The sliding doors of a MasterAce Surf are wrapped, but the door tracks stay bare. The film is cut along the tracks so the door can slide without touching the film. Each sliding door is one large piece of film, and the cut line follows the track edges.

Can I wrap only the hood or the roof of a MasterAce Surf?

Yes, you can wrap only the hood or the roof of a MasterAce Surf as a partial wrap. The partial wrap options for this van also include the mirror caps. A chrome delete covers the window trim and badges, and paint protection film (PPF) protects the front end with clear film.

Is a MasterAce Surf hard to wrap?

A MasterAce Surf is not especially hard to wrap, but some details add work. The sliding side door tracks must stay bare, so the film is cut along them. The two long side doors are large single pieces that need careful handling. The tall 70.3 in (1,786 mm) roof is wrapped from a platform, which takes more time than a lower roof.