Wraps by car

Toyota Matrix wrap

This page covers the Toyota Matrix, a five-door hatchback produced in two generations. A vinyl wrap is a color change film applied over the painted body. The newest body, from 2008 to 2013, takes about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full wrap.

2generations17 mof film for a full wrap

Toyota Matrix, second generation, factory photo
Toyota Matrix, second generation. Factory color shown.

Toyota Matrix wrap colors and ideas

  • Matrix black wrap
  • Matrix white wrap
  • Matrix gray wrap
  • Matrix silver wrap
  • Matrix red wrap
  • Matrix blue wrap
  • Matrix green wrap
  • Matrix yellow wrap
  • Matrix orange wrap
  • Matrix purple wrap
  • Matrix pink wrap
  • Matrix teal wrap
  • Matrix brown wrap
  • Matrix gold wrap
  • Matrix chrome wrap
  • Matrix color shift wrap
  • Matrix carbon fiber wrap
  • Matrix camo and patterned wrap

How much vinyl to wrap a Toyota Matrix

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2013hatchback (5 doors)171.9 in (4,366 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2002–2007hatchback (5 doors)171.3 in (4,351 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Matrix wrap cost factors

Matrix wrap cost depends on the size of the car and the film you choose. A color change on the 171.9 in (4,366 mm) body takes about 56 ft (17 m) of 60-inch (1.52 m) film. Chrome or patterned film raises the amount to about 66 ft (20 m). The final cost also depends on the condition of the paint and the number of panels removed.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Matrix wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Matrix, second generation, factory photo
Factory color shown

2008–2013 Matrix hatchback (second generation)

2008–2013hatchback (5 doors)171.9 in (4,366 mm)

The second-generation Toyota Matrix runs from 2008 to 2013. Paint age is a factor: panels may be original or repainted, and a test spot comes before a full wrap. The installer checks adhesion on a small area before committing film to the whole car.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Toyota Matrix, first generation, factory photo
Factory color shown

2002–2007 Matrix hatchback (first generation)

2002–2007hatchback (5 doors)171.3 in (4,351 mm)

The first-generation Toyota Matrix runs from 2002 to 2007. The size and body style set the amount of film and the number of panels. At 171.3 in (4,351 mm) long, it takes about 56 ft (17 m) of film, and the five-door layout means eight main panels plus the tailgate.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Matrix

A partial wrap on a Matrix can cover the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Matrix: body, cut-outs and film

A Toyota Matrix vinyl wrap follows the shape of a compact five-door hatchback. The car is 171.9 in (4,366 mm) long on the second generation and 171.3 in (4,351 mm) on the first. The tall roof and short nose keep panel sizes moderate. The tailgate adds one more large panel to cover.

Matrix wrap ideas start with the tailgate, which includes the rear glass and limits where film can end. The door handles, mirrors, and badges are removed for a clean install. Panel edges are wrapped around the door shuts where possible. The roof rails on some trims need extra care around their mounts.

How much vinyl to wrap a Matrix depends on which generation you own. Production years differ: 2002 to 2007 for the first generation and 2008 to 2013 for the second. Both bodies are within 0.6 in of the same length, so film estimates stay the same. The second generation has slightly sharper lines, which can affect material usage on the bumpers.

Questions about wrapping a Toyota Matrix

How much vinyl does it take to wrap a Toyota Matrix?

A full Toyota Matrix wrap takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. That figure applies to the second-generation body from 2008 to 2013. Chrome or patterned film needs about 66 ft (20 m).

Can I wrap only the hood or the roof of a Matrix?

Yes, you can wrap only the hood or the roof of a Matrix. Partial wraps often include the hood, roof, and mirror caps. The window trim and badges can be covered separately with a chrome delete.

Is a Matrix hard to wrap?

A Matrix is not the easiest car to wrap, but it is not the hardest. The tailgate with the rear glass in it means the film ends at the edge of the glass, adding a precise cut line. The 171.9 in (4,366 mm) length is average for a hatchback, so the main challenge is that tailgate.

How many generations of the Matrix does this page cover?

This page covers two generations of the Toyota Matrix. The first generation ran from 2002 to 2007, and the second from 2008 to 2013.