Wraps by car

Toyota Mega Cruiser wrap

The Toyota Mega Cruiser wrap page covers the full first generation SUV from 1996 to 2001. This vehicle needs about 82 ft (25 m) of 60-inch (1.52 m) cast film for a full vinyl wrap. Chrome or patterned film raises the estimate to about 92 ft (28 m).

1generations25 mof film for a full wrap

Toyota Mega Cruiser, first generation, factory photo
Toyota Mega Cruiser, first generation. Factory color shown.

Toyota Mega Cruiser wrap colors and ideas

  • Mega Cruiser black wrap
  • Mega Cruiser white wrap
  • Mega Cruiser gray wrap
  • Mega Cruiser silver wrap
  • Mega Cruiser red wrap
  • Mega Cruiser blue wrap
  • Mega Cruiser green wrap
  • Mega Cruiser yellow wrap
  • Mega Cruiser orange wrap
  • Mega Cruiser purple wrap
  • Mega Cruiser pink wrap
  • Mega Cruiser teal wrap
  • Mega Cruiser brown wrap
  • Mega Cruiser gold wrap
  • Mega Cruiser chrome wrap
  • Mega Cruiser color shift wrap
  • Mega Cruiser carbon fiber wrap
  • Mega Cruiser camo and patterned wrap

How much vinyl to wrap a Toyota Mega Cruiser

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2001SUV (5 doors)200.4 in (5,090 mm)about 82 ft (25 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m)

Mega Cruiser wrap cost factors

A Mega Cruiser wrap cost depends on the amount of film and labor time. The vehicle is 200.4 in (5,090 mm) long, so a full wrap uses about 82 ft (25 m) of film. The height of the roof adds labor because installers work from a platform. Partial wraps like the hood or roof use less film and cost less than a full wrap.

  • Film for a full wrap: about 82 ft (25 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (81.7 in (2,075 mm)): the roof is wrapped from a platform.

Mega Cruiser wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Mega Cruiser, first generation, factory photo
Factory color shown

1996–2001 Mega Cruiser SUV (first generation)

1996–2001SUV (5 doors)200.4 in (5,090 mm)

The first generation Toyota Mega Cruiser was built from 1996 to 2001 as a five-door SUV with code XD20. Its height of 81.7 in (2,075 mm) means the roof is wrapped from a platform, adding time. The boxy body and straight panels make cutting film simpler. The tailgate includes the rear glass, and the film ends at the glass edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (81.7 in (2,075 mm)): the roof is wrapped from a platform.

Film: about 82 ft (25 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 92 ft (28 m).

Roof, hood, chrome delete and PPF on a Mega Cruiser

Mega Cruiser partial wrap jobs include the roof, hood, and mirror caps. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs let you change the look without wrapping the whole SUV.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Mega Cruiser: body, cut-outs and film

A Toyota Mega Cruiser vinyl wrap is a large job because the SUV is 200.4 in (5,090 mm) long and has five doors. The tall body means installers work from a platform to reach the roof. Film is cut and applied in sections sized to each panel. The square shape of the body reduces waste compared to curvier vehicles.

Mega Cruiser wrap ideas often start with the tailgate, where the film ends at the edge of the rear glass. The tall roof requires a platform and adds labor time. Door handles, mirrors, and badges are removed for a clean finish. The front grille area also needs careful cutting around openings.

To know how much vinyl to wrap a Mega Cruiser, use about 82 ft (25 m) of 60-inch (1.52 m) cast film for standard colors. Chrome or patterned film needs about 92 ft (28 m) because matching patterns increases waste. The first generation has body code XD20 and was produced as a five-door SUV. This single generation is the only body style listed in the catalog.

Questions about wrapping a Toyota Mega Cruiser

How much vinyl does it take to wrap a Toyota Mega Cruiser?

It takes about 82 ft (25 m) of 60-inch (1.52 m) cast film to wrap a Toyota Mega Cruiser. For chrome or patterned film, plan on about 92 ft (28 m). These figures cover the first generation SUV, which is 200.4 in (5,090 mm) long.

Can I wrap only the hood or the roof of a Mega Cruiser?

Yes, you can wrap only the roof, hood, or mirror caps of a Mega Cruiser. A chrome delete of window trim and badges is another partial option. Paint protection film on the front end is also a partial job. These choices use less film than a full wrap.

Is a Mega Cruiser hard to wrap?

A Mega Cruiser is hard to wrap because of its size and height. The roof is 81.7 in (2,075 mm) above the ground, so installers need a platform. The tailgate has rear glass that requires precise cutting. Overall, the large surface area and tall body add labor time.

How many generations of the Mega Cruiser does this page cover?

This page covers one generation of the Toyota Mega Cruiser. The first generation was produced from 1996 to 2001 as a five-door SUV with code XD20. It is the only body style listed in the catalog.