Wraps by car

Toyota MR-S wrap

A Toyota MR-S wrap covers the convertible body of the W30 sports car built from 1999 to 2007. This page guides you through the film choices and the work a full wrap of this first-generation car takes. A color change wrap of the newest body uses about 36 ft (11 m) of 60-inch (1.52 m) cast vinyl wrap.

1generations11 mof film for a full wrap

Toyota MR-S, first generation, factory photo
Toyota MR-S, first generation. Factory color shown.

Toyota MR-S wrap colors and ideas

  • MR-S black wrap
  • MR-S white wrap
  • MR-S gray wrap
  • MR-S silver wrap
  • MR-S red wrap
  • MR-S blue wrap
  • MR-S green wrap
  • MR-S yellow wrap
  • MR-S orange wrap
  • MR-S purple wrap
  • MR-S pink wrap
  • MR-S teal wrap
  • MR-S brown wrap
  • MR-S gold wrap
  • MR-S chrome wrap
  • MR-S color shift wrap
  • MR-S carbon fiber wrap
  • MR-S camo and patterned wrap

How much vinyl to wrap a Toyota MR-S

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2007convertible (2 doors)153.0 in (3,885 mm) to 153.3 in (3,895 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

MR-S wrap cost factors

An MR-S wrap cost is driven by the film choice, the amount of disassembly and the final size of the covered area. The coupe uses about 36 ft (11 m) of cast film, while chrome or patterned film can use about 46 ft (14 m). More cut-outs around the convertible top and side intakes add labor without changing the film amount.

  • Film for a full wrap: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Restyled in 2002: bumpers and lights differ between the versions, and so do the film cuts.

MR-S wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota MR-S, first generation, factory photo
Factory color shown

1999–2007 MR-S convertible (first generation)

1999–2007convertible (2 doors)153.0 in (3,885 mm) to 153.3 in (3,895 mm)

The open top of the first generation Toyota MR-S is left unwrapped, and the vinyl ends where the fabric begins. The film is trimmed at the windshield header, the side rails and the rear deck so the top can still fold. A folding hard top is wrapped as panels of its own, but the MR-S was built with a fabric top only.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on an MR-S

An MR-S chrome delete and partial wrap cover smaller areas than a full color change. A partial wrap can be the hood, mirror caps or rear deck on this convertible. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end is another option that uses less material.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota MR-S: body, cut-outs and film

The Toyota MR-S vinyl wrap has to follow a short convertible body that measures 153.0 in (3,885 mm) to 153.3 in (3,895 mm) in length. The two-door shape keeps the main panels small, so one installer can handle most sections alone. The film estimate of about 36 ft (11 m) includes the doors, quarter panels, hood and bumpers.

MR-S wrap ideas start with the parts that need cut-outs or come off before film goes on. Door handles, mirrors, lights and the side air intakes are removed or cut around for clean edges. The fabric top is not wrapped, so the film ends where the top begins at the windshield header and rear deck.

Knowing how much vinyl to wrap an MR-S depends on the production year because the car was restyled in 2002. The lengths change slightly from 153.0 in (3,885 mm) to 153.3 in (3,895 mm), but the film estimate stays near 36 ft (11 m). Chrome or patterned film adds material because the pattern must be matched, using about 46 ft (14 m).

Questions about wrapping a Toyota MR-S

How much vinyl does it take to wrap a Toyota MR-S?

A full wrap of a Toyota MR-S uses about 36 ft (11 m) of 60-inch (1.52 m) cast vinyl film. That estimate covers the body of the W30 convertible built from 1999 to 2007. If you choose chrome or patterned film, the amount rises to about 46 ft (14 m).

Is the top of an MR-S wrapped?

No, the fabric top of an MR-S is not wrapped, and the film ends where the top begins at the header, rails and deck. The convertible body means only the painted panels below the top opening receive vinyl. A folding hard top could be wrapped as panels, but the MR-S did not have one.

Which years of the MR-S take the same film cuts?

All years of the Toyota MR-S from 1999 to 2007 take the same film cuts for the body panels. The car was restyled in 2002, but the body dimensions change only from 153.0 in (3,885 mm) to 153.3 in (3,895 mm). The wrap patterns for the hood, doors and rear deck remain consistent across the W30 generation.

Can I wrap only the hood or the roof of an MR-S?

Yes, a partial wrap of an MR-S can cover only the hood, mirror caps or rear deck without wrapping the whole car. These smaller jobs use less film than the full wrap estimate of about 36 ft (11 m). A chrome delete on the window trim and badges or paint protection film on the front end are also options for this convertible.