Wraps by car

Toyota MR2 wrap

A Toyota MR2 wrap covers the small mid-engine sports car with cast vinyl film. Toyota built the MR2 in three generations from 1984 to 2007. The newest body, the third generation, takes about 36 ft (11 m) of 60-inch (1.52 m) cast film for a full wrap. This page gives the film amounts, panel notes and wrap options for each generation.

3generations11 mof film for a full wrap

Toyota MR2, third generation, factory photo
Toyota MR2, third generation. Factory color shown.

Toyota MR2 wrap colors and ideas

  • Toyota MR2 black wrap
  • Toyota MR2 white wrap
  • Toyota MR2 gray wrap
  • Toyota MR2 silver wrap
  • Toyota MR2 red wrap
  • Toyota MR2 blue wrap
  • Toyota MR2 green wrap
  • Toyota MR2 yellow wrap
  • Toyota MR2 orange wrap
  • Toyota MR2 purple wrap
  • Toyota MR2 pink wrap
  • Toyota MR2 teal wrap
  • Toyota MR2 brown wrap
  • Toyota MR2 gold wrap
  • Toyota MR2 chrome wrap
  • Toyota MR2 color shift wrap
  • Toyota MR2 carbon fiber wrap
  • Toyota MR2 camo and patterned wrap

How much vinyl to wrap a Toyota MR2

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2007convertible (2 doors)153.0 in (3,885 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)
1989–1999coupe, targa (2 doors)164.2 in (4,171 mm) to 164.6 in (4,180 mm)about 43 ft (13 m) for the targa to 44 ft (13.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m)
1984–1990coupe (2 doors)154.5 in (3,925 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Toyota MR2 wrap cost factors

A Toyota MR2 wrap cost changes with the film type and the generation. A full wrap of the third generation convertible needs about 36 ft (11 m) of film, the second generation about 43–44 ft (13–13.5 m), and the first generation about 41 ft (12.5 m). Surface preparation adds time when old paint is faded or cracked. A partial wrap or paint protection film (PPF) uses less material than a full color change wrap.

  • Film for a full wrap: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Toyota MR2 wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota MR2, third generation, factory photo
Factory color shown

1999–2007 Toyota MR2 convertible (third generation)

1999–2007convertible (2 doors)153.0 in (3,885 mm)

On the Toyota MR2 third generation convertible, the fabric top is not wrapped. The vinyl film ends where the soft top begins, so the installer trims the film a few millimeters below the roof edge. If the car has a folding hard top, each hard panel is wrapped separately and the seams fall at the panel gaps. The rest of the car is wrapped like a coupe with the top down.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Toyota MR2, second generation, factory photo
Factory color shown

1989–1999 Toyota MR2 coupe, targa (second generation)

1989–1999coupe, targa (2 doors)164.2 in (4,171 mm) to 164.6 in (4,180 mm)

The Toyota MR2 second generation came as a coupe or a targa, and the style decides the panel plan. On the targa, the film ends at the base of the roof opening, and the fabric or glass panel is left unwrapped. The coupe has a full roof, so it uses about 44 ft (13.5 m) of film, the targa about 43 ft (13 m). Both bodies have two long side doors, each one large piece of film.

Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) for the targa to 44 ft (13.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 51 ft (15.5 m).

Toyota MR2, first generation, factory photo
Factory color shown

1984–1990 Toyota MR2 coupe (first generation)

1984–1990coupe (2 doors)154.5 in (3,925 mm)

On a Toyota MR2 first generation from 1984 to 1990, paint age is the first thing to check. Many panels may be original or repainted, and old paint can lift when the film is removed. A test spot on a hidden area shows whether the film will bond cleanly. The wrap itself takes about 41 ft (12.5 m) of film on this two-door coupe.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Toyota MR2

A partial wrap on a Toyota MR2 covers the hood, mirror caps or rear deck. A Toyota MR2 chrome delete covers the bright window trim and badges with black film. Clear paint protection film (PPF) can be applied to the front end to guard the nose from stone chips. These jobs use less material than a full wrap and can be done in stages.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota MR2: body, cut-outs and film

A Toyota MR2 vinyl wrap works well on a car this compact. The third generation is 153.0 in (3,885 mm) long, the second generation 164.2 in (4,171 mm) to 164.6 in (4,180 mm), and the first generation 154.5 in (3,925 mm). Because the car is short and close to the ground, installers use one wide piece for each large panel and spend less time splicing. The wrap still needs trimming and finishing around the curves of the rear quarters and the doors.

Toyota MR2 wrap ideas include accents on the side intakes and a black roof on the coupe. The two long side doors are each one large piece of film, so a two-tone design can follow the door line cleanly. On targa and convertible models the fabric top is not wrapped, and the film ends where the top begins. A folding hard top is wrapped as panels of its own, with seams at the panel gaps.

How much vinyl to wrap a Toyota MR2 depends on the generation and the roof. The third generation convertible takes about 36 ft (11 m) of cast film, the second generation targa about 43 ft (13 m) and the coupe about 44 ft (13.5 m). The first generation coupe takes about 41 ft (12.5 m). Adding chrome or patterned film calls for more material, up to about 51 ft (15.5 m) on the second generation.

Questions about wrapping a Toyota MR2

How much vinyl does it take to wrap a Toyota MR2?

How much vinyl does it take to wrap a Toyota MR2? The newest Toyota MR2, the third generation convertible, takes about 36 ft (11 m) of 60-inch (1.52 m) cast film for a full wrap. The earlier generations need more material because they have a roof: about 43–44 ft (13–13.5 m) for the second generation and about 41 ft (12.5 m) for the first generation.

Is the top of a Toyota MR2 wrapped?

Is the top of a Toyota MR2 wrapped? No, a fabric top on a convertible or targa is not wrapped. The film ends where the fabric begins, and the installer trims it neatly along that edge. A folding hard top is wrapped as panels of its own, with seams at the panel gaps.

Can I wrap only the hood or the roof of a Toyota MR2?

Can I wrap only the hood or the roof of a Toyota MR2? Yes, a partial wrap on a Toyota MR2 can cover the hood, mirror caps or rear deck. The roof of a coupe can be wrapped on its own as an accent. These smaller jobs are a way to change the look without a full vinyl wrap.

Is a Toyota MR2 hard to wrap?

Is a Toyota MR2 hard to wrap? The Toyota MR2 is not hard to wrap because it is small and has smooth lines. The two long side doors are each one large piece of film, which makes installation straightforward. The main extra work is the open top on convertible and targa models, where the film must be trimmed to end at the fabric roof.