Wraps by car

Toyota Opa wrap

The Toyota Opa wrap covers this compact wagon from its single generation, produced from 2000 to 2005. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. This page explains the body details that affect film cutting and the wrap options for the Opa.

1generations17.5 mof film for a full wrap

Toyota Opa, first generation, factory photo
Toyota Opa, first generation. Factory color shown.

Toyota Opa wrap colors and ideas

  • Opa black wrap
  • Opa white wrap
  • Opa gray wrap
  • Opa silver wrap
  • Opa red wrap
  • Opa blue wrap
  • Opa green wrap
  • Opa yellow wrap
  • Opa orange wrap
  • Opa purple wrap
  • Opa pink wrap
  • Opa teal wrap
  • Opa brown wrap
  • Opa gold wrap
  • Opa chrome wrap
  • Opa color shift wrap
  • Opa carbon fiber wrap
  • Opa camo and patterned wrap

How much vinyl to wrap a Toyota Opa

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2000–2005wagon (5 doors)167.3 in (4,250 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Opa wrap cost factors

Opa wrap cost depends on the film type, the size of the car at 167.3 in (4,250 mm), and the labor to remove parts like the tailgate trim and mirrors. A color change wrap takes about 57 ft (17.5 m) of film, while chrome or patterned film uses about 66 ft (20 m) because of matching. The installer's hours also change with the number of cut-outs and the condition of the paint.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2002: bumpers and lights differ between the versions, and so do the film cuts.

Opa wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Opa, first generation, factory photo
Factory color shown

2000–2005 Opa wagon (first generation)

2000–2005wagon (5 doors)167.3 in (4,250 mm)

The first generation Toyota Opa, built from 2000 to 2005, received a restyling in 2002 that changed the bumpers and lights, so film cut for one version does not fit the other. The wagon body style stayed the same, and the external length of 167.3 in (4,250 mm) did not change. For a full wrap, the total film area is the same, but the front and rear bumper templates must match the year of the car.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on an Opa

Partial wrap jobs on the Toyota Opa include the roof, hood, and mirror caps, which can be done without wrapping the whole car. Chrome delete covers the window trim and badges with black film, and paint protection film (PPF) is clear film on the front end. These smaller jobs give you a change in look or protection with less film.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Opa: body, cut-outs and film

The Toyota Opa vinyl wrap is shaped by the wagon's five-door body and its length of 167.3 in (4,250 mm). The long roof and tall sides add surface area compared with a small hatchback, so the film estimate accounts for the full panels. A skilled installer can wrap this body with standard cast film without unusual difficulties.

Opa wrap ideas should start with the tailgate, which has the rear glass in it, so the film ends at the edge of the glass. The bumpers and side mirrors come off for a cleaner edge, and the door handles need cut-outs. Removing these parts adds time, but it gives a finish that looks original.

When you work out how much vinyl to wrap an Opa, only the first generation exists, so the figure of about 57 ft (17.5 m) of 60-inch (1.52 m) cast film is the same for all years. The 2002 restyling changed the bumpers and lights, but those changes do not alter the total film area. Order the footage for the full body and add a little waste for the cut pieces.

Questions about wrapping a Toyota Opa

How much vinyl does it take to wrap a Toyota Opa?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap a Toyota Opa. This figure is for a full body color change wrap of the newest body. If you choose chrome or patterned film, plan for about 66 ft (20 m) because the pattern needs matching.

Which years of the Opa take the same film cuts?

All years of the Toyota Opa, from 2000 to 2005, take the same overall film cuts for the main body. The restyling in 2002 changed the bumpers and lights, so the front and rear bumper film pieces differ between early and late cars. The doors, roof, and quarter panels are the same for every year.

Can I wrap only the hood or the roof of an Opa?

Yes, you can wrap only the hood or the roof of an Opa. A partial wrap often covers the roof, hood, and mirror caps, but you can do just one panel. The hood is a straightforward piece, and the roof on this wagon is long but flat.

Is an Opa hard to wrap?

An Opa is not hard to wrap, but the tailgate with the rear glass in it adds work because the film must end at the edge of the glass. The size of 167.3 in (4,250 mm) means more surface area than a small car, and the bumpers and mirrors need removal for a clean job. With care, a trained installer can handle this body.