Wraps by car

Toyota Passo wrap

The Toyota Passo wrap page covers three generations of this mini hatchback, from 2004 to 2018. A full vinyl wrap of the newest body uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about eight feet to the order. The compact size keeps the job manageable for one installer.

3generations14.5 mof film for a full wrap

Toyota Passo, third generation, factory photo
Toyota Passo, third generation. Factory color shown.

Toyota Passo wrap colors and ideas

  • Passo black wrap
  • Passo white wrap
  • Passo gray wrap
  • Passo silver wrap
  • Passo red wrap
  • Passo blue wrap
  • Passo green wrap
  • Passo yellow wrap
  • Passo orange wrap
  • Passo purple wrap
  • Passo pink wrap
  • Passo teal wrap
  • Passo brown wrap
  • Passo gold wrap
  • Passo chrome wrap
  • Passo color shift wrap
  • Passo carbon fiber wrap
  • Passo camo and patterned wrap

How much vinyl to wrap a Toyota Passo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–2018hatchback (5 doors)143.7 in (3,650 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
2010–2016hatchback (5 doors)143.7 in (3,650 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
2004–2010hatchback (5 doors)142.9 in (3,630 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Passo wrap cost factors

The Passo wrap cost depends on the film choice, the color and the condition of the paint. A full wrap of this mini hatchback needs about 48 ft (14.5 m) of cast film, which sets a baseline for material use. Patterned or chrome film raises the amount to about 56 ft (17 m). Any bodywork or paint correction before the wrap adds labor.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Passo wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Passo, third generation, factory photo
Factory color shown

2016–2018 Passo hatchback (third generation)

2016–2018hatchback (5 doors)143.7 in (3,650 mm)

The third generation Toyota Passo runs from 2016 to 2018 and keeps the five-door hatchback shape. Its length of 143.7 in (3,650 mm) means every main panel is small, so a full wrap uses about 48 ft (14.5 m). The tailgate glass is set inside the panel, so the film stops at the glass edge. There are no extra doors or a long roof to stretch the film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Toyota Passo, second generation, factory photo
Factory color shown

2010–2016 Passo hatchback (second generation)

2010–2016hatchback (5 doors)143.7 in (3,650 mm)

Paint age matters on a second generation Toyota Passo from 2010 to 2016. Some panels may be original, while others could be repainted, and a test spot tells you if the film will stick well. An older paint job can lift when you remove the film, so check each panel. This step adds a little time but prevents damage on a wrap job.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Toyota Passo, first generation, factory photo
Factory color shown

2004–2010 Passo hatchback (first generation)

2004–2010hatchback (5 doors)142.9 in (3,630 mm)

The first generation Toyota Passo from 2004 to 2010 is the shortest of the three at 142.9 in (3,630 mm). The five-door hatchback body has the same number of panels as later cars, so film use stays near 48 ft (14.5 m). The tailgate glass sits inside the metal, so the installer wraps up to the glass edge. A simple body like this is a good first full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Passo

A partial wrap on a Passo can cover the roof, hood or mirror caps. Passo chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) on the front end guards against stone chips on this small car. Each of these jobs uses less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Passo: body, cut-outs and film

The Toyota Passo vinyl wrap suits its five-door hatchback body and 143.7 in (3,650 mm) length. This small car has fewer panels than a larger vehicle, so film use stays around 48 ft (14.5 m). The roof and hood are modest, which makes handling large sheets easier. A single roll of standard cast film is enough for most full wraps.

Passo wrap ideas start with the tailgate, where the rear glass sits inside the panel. The film ends at the edge of the glass, so no cut-out is needed on the hatch. Door handles and mirrors come off for a cleaner edge, but the bumpers can stay on. The front and rear badges are small and easy to cover or remove.

If you want to know how much vinyl to wrap a Passo, the generations do not change the figure. The first generation is 142.9 in (3,630 mm) long, while the second and third are 143.7 in (3,650 mm). Every body is a five-door hatchback with similar panel counts. The same 48 ft (14.5 m) of film covers any of them.

Questions about wrapping a Toyota Passo

How much vinyl does it take to wrap a Toyota Passo?

About 48 ft (14.5 m) of 60-inch (1.52 m) cast film wraps a Toyota Passo. This figure comes from the newest body, the third generation from 2016 to 2018. Chrome or patterned film adds about 8 ft, so the total is 56 ft (17 m). The small hatchback body keeps the amount lower than a mid-size car.

Can I wrap only the hood or the roof of a Passo?

Yes, you can wrap only the hood or the roof of a Passo. A partial wrap on the roof, hood or mirror caps is a standard job. The roof is small enough to cover with one sheet of film. This option uses less material than a full wrap.

Is a Passo hard to wrap?

A Passo is not hard to wrap because its body is small and simple, but the tailgate adds work. The rear glass sits inside the tailgate, so the film must end at the edge of the glass. That edge needs careful trimming for a clean line. The doors and bumpers are straightforward, so a full wrap is manageable for one installer.

How many generations of the Passo does this page cover?

This page covers three generations of the Toyota Passo: first (2004–2010), second (2010–2016) and third (2016–2018). Each generation is a five-door hatchback of similar size. The wrap film estimate stays the same across all three.